The HEPMP-P seris eletric permanent magnets for lifting steel plate are widely used in:

(1) Lifting single steel plate at steel plant or dock;

(2) Auto cutting machine production line;

(3) Steel plate pretreatment line

(4) Lifting steel at shipyards, steel plants, heavy machinery factories.

(5) Achieving more than one joint hanging by beam



Model
Rated lifting capacity(kg) Magnetic pole number Steel plate thickness (mm) Max.pull-off strength(kg) Overall dimension(mm) weight(mm)
A B C D E H
HEPMP-1000P50 1000 10 ≥12 3750 490 220 86 360 16 408 65
HEPMP-1500P50 1500 15 ≥12 5600 490 310 86 360 16 408 85
HEPMP-2000P50 2000 21 ≥12 7800 670 310 86 360 20 456 110
HEPMP-3000P50 3000 32 ≥12 11500 760 400 86 360 20 456 160
HEPMP-1000P70 1000 6 ≥18 4300 370 260 101 -- 16 425 70
HEPMP-1500P70 1500 8 ≥18 5700 480 260 101 360 16 425 92
HEPMP-2000P70 2000 12 ≥18 8500 700 260 101 360 20 470 125
HEPMP-3000P70 3000 18 ≥18 12500 700 370 101 360 20 470 180
HEPMP-5000P70 5000 28 ≥18 20000 810 480 101 450 25 645 270


Note 1.The definition of rated lifting capacity for this series magnets: rated lifting capacity=The max. pull-off strength at 1.5 mm working air-gap/1.5. 2.The steel plate thickness is the minimum thickness of obtain max. lifting force. Not to say that below this thickness can not be lifted. 3.The series have strong magnetic model which the working air-gap is 2.2mm. Their overall dimensions will be same as the above list, but their rated lifting capacity(on 1.5mm working air-gap) is 1.5times of the above list. The strong magnetic