All the power station valves we provide are professionally designed and skillfully manufactured. Our power station valves are selling well all over the world and appreciated by purchasers. We accept customized orders of power station valves to meet your specific requirements.
Our range of Plug...,Power station valves, Power station valves, Y-Type Strainer, T-Type Strainer
We are passionate about elbows, tees, reducer ...
but it doesn't just stop there.
Find out here about our curved, straight, round, large and small product ranges.
Butt welded elbow
Tee & Cross
Standard: ANSI B16.9, B16.28, DIN 2605-1, 2605-2, EN...,Weldable Components, Pipe elbow, Butt-welded elbow, Seamless elbow, Pipe bending, Pipe tee, Pipe cross, end cap, Reducer, End Cap, Carbon Steel cap, Stainless Steel Caps
Steel elbow is used to be installed between two lengths of pipe or tube allowing a change of direction,usually these carbon steel elbows distinguished by connection ends, The ends may be machined for butt welding , threaded , or socketed , so the carbon steel elbows are consist of butt...,Pipe elbows, L/R 45Deg Elbow, S/R 45Deg Elbow, L/R 90Deg Elbow, S/R 90Deg Elbow, L/R 180Deg Elbow, S/R 180Deg Elbow, Large Diameter Elbow
Pipe bend, Bend pipe, Pipe bending, ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.
The bend is used to change the direction of run of pipe.it advantage is can matach long distance transition requirements,so it is commonly that bends dimension according to customer design....,Pipe bend, Bend pipe, Pipe bending, Pipe bend, Bend pipe, Pipe bending, 3D Pipe bending fittings, 5D Pipe bending fittings, 7D pipe bending fittings, High pressure pipe bend, 180 Degree pipe bend
Tee fittings accord to ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.
A tee is also called triplet,three way and "T" pieces and it can be used to either combine or split a fluid flow. Most common are tees with the same inlet and outlet sizes, but 'reducing' tees are...,Steel pipe tee, Pipe crosses, Reducing tee, SS Equal Tee-G Butt-welding, Carbon steel pipe tees, Steel pipe tee, Alloy pipe tee, Stainless pipes tees, Pipe crosses, Reducing tee, Pipe Tee, LT, Lateral tee , RT, Reducing tee
The blind flange is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. This blind flange is available in various sizes and materials and is used to provide positive closer on the ends of pipes, valves or equipment nozzles....,Blind Flanges, BL Flange, BLRF, Blind Flanges, BL Flange, ASME/ANSI B16.5 Class 150 BL, ASME/ANSI B16.5 Class 300 BL, ASME/ANSI B16.5 Class 600 BL, ASME/ANSI B16.5 Class 900 BL, ASME/ANSI B16.5 Class 1500 BL, ASME/ANSI B16.5 Class 2500 BL, ASME B16.47 Series A/MSS SP-44 Class 150 BL, ASME B16.47 Series A/MSS SP-44 Class 300 BL, ASME B16.47 Series A/MSS SP-44 Class 600 BL, ASME B16.47 Series A/MSS SP-44 Class 900 BL, ASME B16.47 Series B/API 605 Class 75 BL, ASME B16.47 Series B/API 605 Class 150 BL, ASME B16.47 Series B/API 605 Class 300 BL, ASME B16.47 Series B/API 605 Class 600 BL, ASME B16.47 Series B/API 605 Class 900 BL, DIN 2527 PN10, DIN 2527 PN16
A figure-8 blank (also called a Spectacle Blind Flange) is a pressure-retaining plate with one solid end and one open end connected with a web or tie bar.
Spectacle Blind Flange
Size: 1/2" to 60", DN 12mm to DN 1500mm
Pressure class: Class 150 to Class 2,500, PN...,Figure-8 Blanks (Spectacle Blind Flang, ASME B16.48 Class 150, ASME B16.48 Class 300, Figure-8 Blanks, Spectacle Blind Flange, ASME B16.48 Class 600, ASME B16.48 Class 900, ASME B16.48 Class 1500, ASME B16.48
The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange face. This radius is necessary to have the flange accommodate a lap joint stub end. Normally, a lap joint flange and a lap joint stub end are mated together is an...,Lap Joint Flanges, LJF, Flange-Lap Joint Flange, ASME/ANSI B16.5 Class 150 LJ ASME/ANSI B16.5 Class 300 LJ, ASME/ANSI B16.5 Class 600 LJ, ASME/ANSI B16.5 Class 900 LJ, ASME/ANSI B16.5 Class 1500 LJ, ASME/ANSI B16.5 Class 2500 LJ
Orifice flanges are used instead of the standard pipe flanges when orifice plate or flow nozzle is used. The basic purpose for this is to measuring the flow rate of either gases or liquids in the respective pipeline. These flanges are used in various industrial applications and are available in...,Orifice Flanges, Real Orifice Flanges, Orifice Flanges, 300# Slip-On Orifice Flange, 300# Weld Neck Orifice Flange , 600# Weld Neck Orifice , (raised face and RTJ ring type joint) Flange 900# Weld Neck Orifice (raised face and RTJ ring type joint) Flange, 1500# Weld Neck Orifice (raised face and RTJ ring type joint) Flange, 2500# Weld Neck Orifice (raised face and RTJ ring type joint) Flange
The socket welding flange is similar to a slip-on flange except it has a bore and a counterbore dimension. The counterbore is slightly larger than the O.D. of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. The diamter of the smaller bore is the...,Socket Welding Flanges, SW Flange, Socket Welding Flanges, SW Flange, ASME/ANSI B16.5 Class 150 SW, ASME/ANSI B16.5 Class 300 SW, ASME/ANSI B16.5 Class 600 SW, ASME/ANSI B16.5 Class 1500 SW