Taber Abrasion Tester
This tester applied to do the test of wear-resistant in skin, leather, cloth, paint, paper, flooring, plywood, glass and natural rubber. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight...,Taber Abrasion Tester SL-L02 , Taber Abrasion Tester
Bite Test Clamp
Simulates a child biting the accessible area of toys. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards result from the bite test such as sharp...,Bite Test Clamp SL-S06 , Bite Test Clamp
Sharp Point Tester
To determine whether accessible sharp points on toys are likely to cause injury. If the accessible sharp point penetrates a specified depth into the small rectangular opening of the tester, the LED is illuminated to indicate that the point is unacceptably sharp. Toys..., Sharp Point Tester SL-S01 , Sharp Point Tester
Rotawash Washing Fastness Tester is used for determining colour fastness of textile materials to washings. This is attained by mechanically agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap – soda solution. Before being rinsing and dried. The change...,Rotawash Washing Fastness Tester SL-F09, color fastness tester
Crock meter –manual
Colour Fastness of dyed or printed fabrics against perspiration is determined by exposing the fabric sample to the action of both alkaline and acidic reagents while in contact with undyed adjacent fabrics is placed between plastic plates under a fixed load inside an oven...,Crock meter –manual SL-F10, crockmeter
Chair Pull Back Impact Tester
Purpose: To check if each part is the same, loose and weld color fastness
Instruction; Fixed Chair casters, the back of Chair to a certain strength, speed, direction, trips and backs a set amount of repeated actions, and then the review of each part are the same,...,Chair Pull Back Impact Tester SL-T20 , Chair Back Impact Tester
Perspirometer
Colour Fastness of dyed or printed fabrics against perspiration is determined by exposing the fabric sample to the action of both alkaline and acidic reagents while in contact with undyed adjacent fabrics is placed between plastic plates under a fixed load inside an oven..., Perspirometer SL-Fll, perspirometer
Color Assessment Cabinet
Color Assessment Cabinet SL-F12
Colour matching cabinet will show your true colour. We guarantee that it offers a standardised viewing environment for visual colour evaluation leading to faster and accurate colour decisions at your end.
FIVE LIGHT SOURCE CABINET HAS...,Color Assessment Cabinet SL-F12, Color Assessment Cabinet
Spray Rating Tester
Spray Rating Tester
To determine the surface wetting resistance of fabrics. Comprising a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below the nozzle. The appearance of the specimen is compared against an...,Spray Rating Tester SL-F13, wetting tester
AATC Rotary Crockmeter
To determine the color fastness of textiles to dry or wet rubbing particularly for printer fabrics. Applies 1134 grams of pressure on a 16mm finger and rotate 1.125 turns clockwise then anti-clockwise. The operating handle is however turned in one direction only....,AATC Rotary Crockmeter SL-F27, AATC Rotary Crockmeter
Round Cutter / Sample Cutter
A specialized instrument to determine the GSM of the textiles (Woven, Non Woven or Knitted, Fabrics) Our Round Cutter can be used for virtually any type of material including Film, Foam, Carpet Paper and Board.
The unit is recommended for Yield Testing i.e....,Round Cutter / Sample Cutter SL-T01, Round Cutter
Taber Abrasion Tester SL-L02
