Twfta Marketplace
Products Companies Find Suppliers Find buyer
 
Encapsulating adhesive,Anaerobic Adhesives,UV Adhesives,Instant Adhesives,Thermal Conduction Material,Resists Solder Glue,SMT Epoxy Adhesives,RTV Silicone sealant,Conformal Coating,Precision Detergents,Antirust Lubricates,Particular Product  

 
  Company Profile
  Products Showroom
  Contact Us
 




 

UV Acrylic conformal coating




        Inquiry   Now      
        Contact   Info       
   
   


UV Acrylic conformal coating

Product Features
Ausbond®3521 is a kind of acrylic protecting
paint with single-component, low-viscosity and
ultraviolet radiation curing, this product applies to many processes of brush coating, spray coating and dip coating etc., and can dry on the surface within several seconds under ultraviolet irradiation with certain wave length, and will form a transparent and soft protecting foam after curing,with excellent features of insulation, damp-roof,waterproof, electric leakage resistance, anti-shock,dust proof, antisepsis, aging resistance and corona resistance etc.

Typical Purposes
Widely applied for ‘three-proof’ protection of
circuit board of various electronic industries, with strong adhesive and tightness, excellent humidity and heat resistance performance, flammability resistance performance, aging resistance performance, good antisepsis, anti-chemical corrosion, waterproof, anti-rust and excellent dielectric performance and insulation
performance.It can protect the use of circuit board under various bad environments fully without
affecting its working and signal.

Package Specification
1kg/bottle.

Storage and Transport
1. This product should be reserved in cool and dry
environment under25℃ to avoid the illumination
of ultraviolet and sunshine, or the polymerization
will occur; the shelf life is 12months.
2. This product belongs to non-dangerous articles;
please transport it as general articles and take care of the leakage during transit!




Ausbond(China) Co.,Ltd Products

UV Acrylic conformal coating
UV Acrylic conformal coating Product Features Ausbond®3521 is a kind of acrylic protecting paint with single-component, low-viscosity and ultraviolet radiation curing, this product applies to many processes of brush coating, spray coating and dip coating etc., and can dry on the surface...,UV Acrylic conformal coating , Acrylic conformal coating,Acrylic conformal paint
 
UV Acrylic adhesive for Glass to Metal
UV Acrylic adhesive for Glass to Metal Product Features Ausbond® A335 is a kind of single-component high strength ultraviolet curing adhesive agent, which has the high adhesive force for many metals, such as stainless steel, aluminum alloy, plating surface, special glass and low-surface...,UV Acrylic adhesive for Glass to Metal, Uv adheisve UV glue
 
Anaerobic column hole/shaft fit parts retaining adhesive
Anaerobic column hole/shaft fit parts retaining adhesive Product Introduction Ausbond® A603 is a kind of anaerobic column hole/shaft fit parts retaining adhesive with single component, high strength, universality and low viscosity.Cure between two closely metal surfaces when isolated with...,Anaerobic column hole/shaft fit parts retaining adhesive, Anaerobic adhesive,Anaerobic glue
 
Precision electrons detergent
Precision electrons detergent Product Introduction Ausbond® 60 is a kind of precision electrons and electric appliances detergent without damage to plastic by using the environment-friendly preparation and without containing CFC and HCFC. It can remove oil stain, grease, smudge and...,Precision electrons detergent, Detergent,Cleaner
 
Metal surface oil-removal detergent
Metal surface oil-removal detergent Product Introduction Ausbond® 67 is a kind of universal metal surface oil-removal detergent with industry level, which can effectively clear the surface oil stain and smudge without any trace. Product Features 1. Fast penetration, strong oil stain...,Metal surface oil-removal detergent, Detergent,Cleaner
 
Anti-static removal detergent for LCD
Anti-static removal detergent for LCD Product Introduction Ausbond® 75 is a kind of anti-stat removal detergent with special preparation, which can remove static effectively, and also prevent the static ions from accumulating, and remove dust and finger mark fast at the same time....,Anti-static removal detergent for LCD, Detergent,Cleaner
 
Insistant adhesive
Insistant adhesive Product Introduction Ausbond® A401 instant adhesive is a kind of cyanoacrylate adhesive with medium viscosity and no sensitivity to surface, used for bonding inert, multi-hole and acid material. Typical Purposes Applied for bonding various metals, plastics and...,Insistant adhesive , Instant adhesive for Metal,Instant glue for Metal
 
Low albino Instant glue
Low albino Instant glue Product Introduction Ausbond® A460 instant adhesive is a kind of cyanoacrylate agent with low smell, whitening and viscosity. Typical Purposes It is applied to the paste of various metal, plastics and elastic body, especially the cosmetics with low whitening...,Low albino Instant glue, Instant adhesive for Metal,Instant glue for Metal
 
Fast glue for Rubber
Fast glue for Rubber Product Introduction Ausbond® A480 instant adhesive is a kind of cyanoacrylate agent of rubber intensified style with mid viscosity, which owns the good performance of anti shock, anti vibration, anti stripping and anti heat. Typical Purposes It is applied to the...,Fast glue for Rubber, Instant adhesive for Metal,Instant glue for Metal
 
Cyanoacrylate adhesive for Plastic
Cyanoacrylate adhesive for Plastic Product Introduction Ausbond® A495 instant adhesive is a king of cyanoacrylate agent with low viscosity, which can fulfil the fast paste of many materials. Typical Purposes It is applied to the paste of rubber, plastics and metal. Package...,Cyanoacrylate adhesive for Plastic, Instant adhesive for Metal,Instant glue for Metal
 
High temperature resistant Anaerobic adhesive
High temperature resistant Anaerobic adhesive Product Introduction Ausbond® A620 is a kind of anaerobic column hole/shaft fit parts retaining adhesive with single component, high strength, high-temperature and thixotropy viscosity.It is used for the connection and fit of column parts that...,High temperature resistant Anaerobic adhesive, Anaerobic adhesive,Anaerobic glue
 
 
Contact Info
URL:
TEL:
Fax:
Country: China
Address:
Room 212,BuildingD7,No1599 North-west Road,Suzhou,Jiangsu Province

Send Inquiry

 
Company:
*Contact:
*Email:
URL:
TEL:
Fax:
Country:
Address:
*Subject:
Comment:
 

 
 
 
  Contact Us Site Map About Us Trade Links
2005-2014 copyright by twfta.com. All rights reserved.