Twfta Marketplace
Rods, sheets, hollows & machined parts of PTFE / Teflon , Nylon6, UHMWPE / PE 1000, POM / Acetal / Delrin , PVDF , rigid PVC , HDPE / PE100, PP, PET , FEP, PFA, TFM , PEEK , PC , CPVC, PBT, PBI, ABS, HMHDPE / PE 500 , Acrylic / PMMA.
Machinable Plastic Materials,
Plastic Tubing and Profiles,
Films & Tapes,
Fluoroplastic Raw Materials
Contact Information:
Country:
India
Address:
15 aradhana,sec-13 r.k puram new delhi-110066
Send Inquiry
Company:
Contact:
Email:
URL:
TEL:
Fax:
Country:
Address:
Subject:
Comment:

Products:

Machinable Plastic Materials.
Machinable Plastic Materials., PTFE / Teflon , Nylon6, UHMWPE ,Rods, sheets, hollows & machined parts of PTFE / Teflon , Nylon6, UHMWPE / PE 1000, POM / Acetal / Delrin , PVDF , rigid PVC , HDPE / PE100, PP, PET , FEP, PFA, TFM , PEEK , PC , CPVC, PBT, PBI, ABS, HMHDPE / PE 500 , Acrylic / PMMA.
Plastic Tubing and Profiles
Plastic Tubing and Profiles, PTFE, FEP, PFA, ETFE , PI, Nylon , HDPE,Precision tubing in PTFE, FEP, PFA, ETFE , PI, Nylon , HDPE, silicon rubber, soft PVC for applications in medical, electronics, instrumentation, fluid handling, general engineering, insulation ; convoluted / corrugated , multilumen , striped, colored tubing & tubing fabrications ; Profiles in...
Films & Tapes
Films & Tapes, PTFE, FEP, PFA films,UL approved PTFE, FEP, PFA films; high performance PTFE plain adhesive tapes, PTFE adhesive tapes with glass cloth. PTFE glass cloth & endless flat belts, PTFE architectural fabric; ETFE, PC, ABS films.
Machined Plastic parts for process and engineering industry as per drawing
Machined Plastic parts for process and engineering industry as per drawing, insulators,Flat & spiral wound gaskets, insulators, guide ways / slide ways, seals and O-rings, packing, bushings, blades, valve & pump seals, liners.
Fluoroplastic Raw Materials
Fluoroplastic Raw Materials, PVDF, FEP, PFA, ETFE, TFM ,Virgin & compounded PTFE resins for compression ram & paste extrusion, impregnation; PTFE micro powders; resins in PVDF, FEP, PFA, ETFE, TFM for lining, injection and extrusion