Products - China and Global Manufacturers

The autoclave, also known as steam curing autoclave, is a large pressure vessel of heavy weight and huge volume. The autoclave is widely used in the autoclave curing of aerated concrete blocks, concrete pipe pile, sand-lime brick, ash bricks, porous calcium silicate board, insulation asbestos board, high-strength gypsum and other building materials. Moreover, it is also widely applied in rubber products, wood drying and preservative treatment, heavy metal smelting, the firebrick invasion of oil seepage coal, composite glass steam curing, high-pressure treatment of chemical fiber products, high temperature and pressure treatment of canned food processing, pulp digester, cable vulcanization, fish net stereotype as well as the production projects of chemical, pharmaceutical, aerospace and other industries that need pressure steam curing process. Features of autoclave: 1. Autoclave Drawing take the Supervisory Regulations on Safety Technology for Pressure Vessel GB 150 as the standard, designed by the fourth Ministry of Machinery Design Institute. 2. Selecting iron &steel 16MnR vessel special plate, edge planed around to break the mouth, adopting CPFFCC welding preparation craft and Shanghai People automatically buried arc welding equipment, pressure elements 100% X-ray film testing to ensure that the welding craft. 3. Kettle circle, kettle door using of 16Mn level 2 drop forging pieces, annealing, heat treatment, autoclave door have been insulated before leave the factory. 4. Reducer adopt turbine and worm, it is different from other manufacturers' CYCLO (cycloid reducer), triple safety protection electronic interlock device the manual interlock device (manual screw) hand reducer. 5. ¢ 2 x 21 m kettle, can accommodate 20, 000 standard brick, 28.8 m³ Aerated block; ¢ 2 × 31 m kettle, can accommodate 30, 000 standard bricks, 39m³ Aerated block; 6.21 m kettle: The weight of 14mm differ by 2 tons from the weight of 16mm; 31 m kettle: The weight of 14mm differ by 3 tons from the weight of 16mm;

Quick Details: Inner diameter: 3.2m Medium: air type: Laminated Glass Autoclave Design temperature: 150C Applications: Wood, Brick,Rubber, Food, Glass industry Large-ScaleSteamGlassDeep-ProcessingDia3.2mLaminatedGlassAutoclave/AutoClave Machine Specifications: - - - - Items | Unit | SpecificationsandParameters | FJK1.4-1.654D | FJK1.5-25D | FJK1.5-2.55D | FJK1.5-2.685D | FJK1.5-2.855D | Insidediameter | M | 1.65 | 2 | 2.5 | 2.68 | 2.85 | Effectivelength | M | 4 | 5 | 5 | 5 | 5 | Designpressure | Mpa | 1.4 | 1.5 | 1.5 | 1.5 | 1.5 | Designtemperature | C | 150 | 150 | 150 | 150 | 150 | Workingpressure | Mpa | 1.3 | 1.4 | 1.4 | 1.4 | 1.4 | Workingtemperature | C | 150 | 150 | 150 | 150 | 150 | Medium | | air | air | air | air | air | Gauge | MM | 900 | 1000 | 1000 | 1000 | 1000 | Effectivevolume | M3 | 10 | 18 | 25 | 28 | 31 | Grossweight | T | 7 | 9 | 16 | 25 | 30 | Overalldimension | M | 62.53 | 72.83 | 733.5 | 7.83.23.8 | 93.55 | - - - - Description: Glass autoclave is a kind of key equipment, which is used for glass deep-processing. To achieve the safety demands of laminated glass through the pressure and heat treatment process. It is widely used in automotive industry, aerospace, defense industry, building decoration, etc. It is equipped with the safety valve, the pressure gauge, the temperature element and so on. Besides power driven, pneumatic ways to open the door, it also has the safety interlock. There are heating elements for warming & forcing and cooling device inside of the autoclave. It will automatic control and detect the opening and closing doors, temperature, pressure in autoclave by PLC controller, which is the glass workpiece precess. Applications: 1. Wood industry 2. Brick industry 3. Rubber industry 4. Food industry 5. Glass industry Competitive Advantage: Autoclave is a kind of large-scale steam equipment. It can be used to steam sand lime brick, flyash brick, slag brick, aerated concrete block, cement pile and other cement products. Besides that, it also has a widely application in deep processing of glass, wood, rubber, thermal insulation material, medicine, high strength gypsum, sizing the fishing net industry and so on. We can manufacture various forms of the autoclaves according to the requirements of our customers. Experts In our company absorbed the advantages of foreign similar products, and improved the strength calculation by analyzing the main pressure parts and doing all kind of stress test.

Quick Details: Inner diameter:2m Medium: air Overalldimension: 72.83 type: Laminated Glass Autoclave Raw Material: sand lime brick, flyash brick, slag brick, aerated concrete block, etc. Pressure Heat Dia 2m Laminated Glass Autoclave / Autoclave Machine For Glass Deep - Processing Description: Glass autoclave is a kind of key equipment, which is used for glass deep-processing. To achieve the safety demands of laminated glass through the pressure and heat treatment process. It is widely used in automotive industry, aerospace, defense industry, building decoration, etc. It is equipped with the safety valve, the pressure gauge, the temperature element and so on. Besides power driven, pneumatic ways to open the door, it also has the safety interlock. There are heating elements for warming & forcing and cooling device inside of the autoclave. It will automatic control and detect the opening and closing doors, temperature, pressure in autoclave by PLC controller, which is the glass workpiece precess. Specifications: - - - - Items | Unit | SpecificationsandParameters | FJK1.4-1.654D | FJK1.5-25D | FJK1.5-2.55D | FJK1.5-2.685D | FJK1.5-2.855D | Insidediameter | M | 1.65 | 2 | 2.5 | 2.68 | 2.85 | Effectivelength | M | 4 | 5 | 5 | 5 | 5 | Designpressure | Mpa | 1.4 | 1.5 | 1.5 | 1.5 | 1.5 | Designtemperature | C | 150 | 150 | 150 | 150 | 150 | Workingpressure | Mpa | 1.3 | 1.4 | 1.4 | 1.4 | 1.4 | Workingtemperature | C | 150 | 150 | 150 | 150 | 150 | Medium | | air | air | air | air | air | Gauge | MM | 900 | 1000 | 1000 | 1000 | 1000 | Effectivevolume | M3 | 10 | 18 | 25 | 28 | 31 | Grossweight | T | 7 | 9 | 16 | 25 | 30 | Overalldimension | M | 62.53 | 72.83 | 733.5 | 7.83.23.8 | 93.55 | - - - - Applications: 1. Wood industry 2. Brick industry 3. Rubber industry 4. Food industry 5. Glass industry Competitive Advantage: Autoclave is a kind of large-scale steam equipment. It can be used to steam sand lime brick, flyash brick, slag brick, aerated concrete block, cement pile and other cement products. Besides that, it also has a widely application in deep processing of glass, wood, rubber, thermal insulation material, medicine, high strength gypsum, sizing the fishing net industry and so on. We can manufacture various forms of the autoclaves according to the requirements of our customers. Experts In our company absorbed the advantages of foreign similar products, and improved the strength calculation by analyzing the main pressure parts and doing all kind of stress test.

Quick Details: Medium: air type: Laminated Glass Autoclave Overalldimension : 72.83 Raw Material: sand lime brick, flyash brick, slag brick, aerated concrete block, etc. AutomotivePressureHeatDia2mLaminatedGlassAutoclave/AutoclaveMachineForBuildingDecoration Description: Glass autoclave is a kind of key equipment, which is used for glass deep-processing. To achieve the safety demands of laminated glass through the pressure and heat treatment process. It is widely used in automotive industry, aerospace, defense industry, building decoration, etc. It is equipped with the safety valve, the pressure gauge, the temperature element and so on. Besides power driven, pneumatic ways to open the door, it also has the safety interlock. There are heating elements for warming & forcing and cooling device inside of the autoclave. It will automatic control and detect the opening and closing doors, temperature, pressure in autoclave by PLC controller, which is the glass workpiece precess. Specifications: - - - - Items | Unit | SpecificationsandParameters | FJK1.4-1.654D | FJK1.5-25D | FJK1.5-2.55D | FJK1.5-2.685D | FJK1.5-2.855D | Insidediameter | M | 1.65 | 2 | 2.5 | 2.68 | 2.85 | Effectivelength | M | 4 | 5 | 5 | 5 | 5 | Designpressure | Mpa | 1.4 | 1.5 | 1.5 | 1.5 | 1.5 | Designtemperature | C | 150 | 150 | 150 | 150 | 150 | Workingpressure | Mpa | 1.3 | 1.4 | 1.4 | 1.4 | 1.4 | Workingtemperature | C | 150 | 150 | 150 | 150 | 150 | Medium | | air | air | air | air | air | Gauge | MM | 900 | 1000 | 1000 | 1000 | 1000 | Effectivevolume | M3 | 10 | 18 | 25 | 28 | 31 | Grossweight | T | 7 | 9 | 16 | 25 | 30 | Overalldimension | M | 62.53 | 72.83 | 733.5 | 7.83.23.8 | 93.55 | - - - - Applications: 1. Wood industry 2. Brick industry 3. Rubber industry 4. Food industry 5. Glass industry Competitive Advantage: Autoclave is a kind of large-scale steam equipment. It can be used to steam sand lime brick, flyash brick, slag brick, aerated concrete block, cement pile and other cement products. Besides that, it also has a widely application in deep processing of glass, wood, rubber, thermal insulation material, medicine, high strength gypsum, sizing the fishing net industry and so on. We can manufacture various forms of the autoclaves according to the requirements of our customers. Experts In our company absorbed the advantages of foreign similar products, and improved the strength calculation by analyzing the main pressure parts and doing all kind of stress test.

Quick Details: Inner diameter: 3.2m Medium: air type: Laminated Glass Autoclave Design temperature: 150C Applications: Wood, Brick,Rubber, Food, Glass industry Large-ScaleSteamGlassDeep-ProcessingDia3.2mLaminatedGlassAutoclave/AutoClaveMachine Specifications: - - - - Items | Unit | SpecificationsandParameters | FJK1.4-1.654D | FJK1.5-25D | FJK1.5-2.55D | FJK1.5-2.685D | FJK1.5-2.855D | Insidediameter | M | 1.65 | 2 | 2.5 | 2.68 | 2.85 | Effectivelength | M | 4 | 5 | 5 | 5 | 5 | Designpressure | Mpa | 1.4 | 1.5 | 1.5 | 1.5 | 1.5 | Designtemperature | C | 150 | 150 | 150 | 150 | 150 | Workingpressure | Mpa | 1.3 | 1.4 | 1.4 | 1.4 | 1.4 | Workingtemperature | C | 150 | 150 | 150 | 150 | 150 | Medium | | air | air | air | air | air | Gauge | MM | 900 | 1000 | 1000 | 1000 | 1000 | Effectivevolume | M3 | 10 | 18 | 25 | 28 | 31 | Grossweight | T | 7 | 9 | 16 | 25 | 30 | Overalldimension | M | 62.53 | 72.83 | 733.5 | 7.83.23.8 | 93.55 | - - - - Description: Glass autoclave is a kind of key equipment, which is used for glass deep-processing. To achieve the safety demands of laminated glass through the pressure and heat treatment process. It is widely used in automotive industry, aerospace, defense industry, building decoration, etc. It is equipped with the safety valve, the pressure gauge, the temperature element and so on. Besides power driven, pneumatic ways to open the door, it also has the safety interlock. There are heating elements for warming & forcing and cooling device inside of the autoclave. It will automatic control and detect the opening and closing doors, temperature, pressure in autoclave by PLC controller, which is the glass workpiece precess. Applications: 1. Wood industry 2. Brick industry 3. Rubber industry 4. Food industry 5. Glass industry Competitive Advantage: Autoclave is a kind of large-scale steam equipment. It can be used to steam sand lime brick, flyash brick, slag brick, aerated concrete block, cement pile and other cement products. Besides that, it also has a widely application in deep processing of glass, wood, rubber, thermal insulation material, medicine, high strength gypsum, sizing the fishing net industry and so on. We can manufacture various forms of the autoclaves according to the requirements of our customers. Experts In our company absorbed the advantages of foreign similar products, and improved the strength calculation by analyzing the main pressure parts and doing all kind of stress test.

304 Stainless Steel Oil Temperature Controller Unit for Injection Molding / Paper machine / Brick machine AODE Mold Temperature Control Units(MTC) are used to preheat a process to the desired operating temperature by engaging the unit's electric immersion heater and recirculating the oil in the system. Oil type TCU circulate high temperature heat transfer fluid through the process application for temperature control. AEOT series TCU offer the range of temperature control from 25C to 180 C FEATURES: # Isolated electric cabinet for longer services lives of electric appliances # 304 stainless steel integrated pipelines for less pipe resistance and rust # Control mode : imported microcomputer or PLC (optional) # Pressure test and Functional test of system prior to shipment # High temperature precision (PID1C) # Explosion-proof device for pipelines # Thermometer for return oil # Automatic air-exhausting after startup # Switchover of heating power # BY-PASS pressure release loop for hot oil # All welded construction use 2.0 steel plate # High-temperature peripheral turbine pump # PID temperature controller (UK WEST P6100) OPTIONAL FUNCTIONS: # Negative-pressure system # Air blowing & oil returing # Instantly cool down return oil & shut down # Customizable multi-point temperature control # RS485 communication for automated management # Customizable horse power and heating power for oil pump # Plate heat exchanger for for process requires Heating And Cooling SAFETY PROTECTIONS: # Pressure Detection: pressure gauge with electric contact which show real pressure of entire system wasequipped on the piping. Control system will alarm immediately when pressure fall into a certain value, andthe Heater will stop at the same time. # Oil Low Level Detection: Expansion tank is equipment with a ball float level controller, Control system willalarm immediately when level fall into a certain value, and the Heater will stop at the same time. # Other Protection: Over Temperature Alarm, Automatic Interlock Protection, Power Reverse Alarm, Pump Overload Alarm, Heating Anomaly Alarm, Short Circuit Alarm, etc. MODEL SPECIFICATIONS: - - - - Model | Heating Capacity | Pump Data | Pipe Connecting | Approx. | Overall Size | kw | BTU/Hr | Power (kw) | Flow (L/min) | Lift (m) | Inlet (DN) | Outlet (DN) | Weight (kg) | L*W*H (mm) | AOS-05 | 6 | 20478 | 0.75 | 45 | 30 | 10*2 | 10*2 | 66 | 630*325*680 | AOS-05A | 6 | 20478 | 0.37 | 30 | 28 | 10*2 | 10*2 | 66 | 630*325*680 | AOS-10 | 9 | 30717 | 0.75 | 100 | 18 | 10*4 | 10*4 | 75 | 630*325*680 | AOS-10A | 9 | 30717 | 0.75 | 45 | 30 | 10*2 | 10*2 | 75 | 630*325*680 | AOS-20 | 12 | 30717 | 1.5 | 120 | 20 | 10*4 | 10*4 | 80 | 630*325*680 | AOS-20A | 9 | 30717 | 0.75 | 100 | 18 | 10*4 | 10*4 | 80 | 630*325*680 | AOS-30-24 | 24 | 81912 | 2.2 | 150 | 22 | 25 | 25 | 90 | 1150*420*1000 | AOS-30-36 | 36 | 122868 | 2.2 | 150 | 22 | 25 | 25 | 90 | 1150*420*1000 | AOS-50-36 | 36 | 122868 | 3.75 | 250 | 30 | 32 | 32 | 150 | 1150*420*1000 | AOS-50-45 | 45 | 153585 | 3.75 | 250 | 30 | 32 | 32 | 180 | 1570*550*1200 | AOST-50-36 | 36 | 122868 | 4 | 266.7 | 32 | 32 | 32 | 160 | 1570*550*1200 | AOST-50-60 | 60 | 204780 | 4 | 266.7 | 32 | 32 | 32 | 180 | 1570*550*1200 | AOST-50-80 | 80 | 273040 | 4 | 266.7 | 32 | 40 | 40 | 350 | 1600*600*1400 | - - - - # Wereservetherighttomakechangestotheabovespecificationswithoutnotification. # Besides abovespecifications,we canalsocustom design unique units asyourequest. # Formoremodeldetails,pleasecheckmodelindexontheleft. PIPING AND INSTRUMENT DIAGRAM: APPLICATIONS: Hot Rolling Machine Calender Rolls Wood Presses Laminating Presses Molding Presses Rubber Presses Jacketed Vessels Reactors Heat Exchangers Mixers Printing Machines Asphalt Vulcanizing Presses SERVICE: # Your inquiry related to our products or prices will be replied in 24hours. # We can sendProcess Cooling&Heating Selection Tableto you for selecting suitable units. # We will offer detailed Technical Solution including configuratuion and design idea for you. # OEM&ODM, any your customized units we can help you to design and put into product

AutomaticHotWaterIndustrialTemperatureControllerUnitForShearer/BoringMachine/BrickMachine AODE Mold Temperature Control Units(MTC) are used to preheat a process to the desired operating temperature by engaging the unit's electric immersion heater and recirculating the oil in the system. Oil type TCU circulate high temperature heat transfer fluid through the process application for temperature control. AEWH series TCU offer the range of temperature control from 15C to 120 C FEATURES: # High temperature precision (PID1C) # Explosion-proof device for pipelines # Thermometer for return water # Automatic air-exhausting after startup # Switchover of heating power # BY-PASS pressure release loop for hot water # All welded construction use 2.0 steel plate # PID temperature controller (UK WEST P6100) # Control mode : imported microcomputer or PLC (optional) # Pressure test and Functional test of system prior to shipment # Isolated electric cabinet for longer services lives of electric appliances OPTIONAL FUNCTIONS: # Air blowing & water return # Instantly cooling & shut down # Customizable multi-point temperature control # Customizable horse power and heating power for water pump # RS485 communication for automated management # Plate heat exchanger for process requires Heating And Cooling SAFETY PROTECTIONS: # Pressure Detection: pressure gauge with electric contact which show real pressure of entire system wasequipped on the piping. Control system will alarm immediately when pressure fall into a anomaly value, and start the BY-PASS pressure release loop protection, at the same time Heater will stop working. # Water Low Level Detection: Liquid switch is equipment with a ball float level controller, Control system will alarm immediately when level fall into a certain value, and the Heater will stop at the same time. # Other Protection: Over Temperature Alarm, Power Reverse Alarm, Pump Overload Alarm, Heating Anomaly Alarm, Short Circuit Alarm, MODEL SPECIFICATIONS: - - - - Model | Heating Capacity | Pump Data | Pipe Connecting | Approx. | Overall Size | kw | BTU/Hr | Power (kw) | Flow (L/min) | Lift (m) | Inlet (DN) | Outlet (DN) | Weight (kg) | L*W*H (mm) | AWM-05 | 6 | 20478 | 0.75 | 45 | 30 | 10*2 | 10*2 | 62 | 620*325*580 | AWM-05A | 9 | 30717 | 0.37 | 30 | 28 | 10*2 | 10*2 | 62 | 620*325*580 | AWM-10 | 9 | 30717 | 0.75 | 110 | 16 | 10*4 | 10*4 | 72 | 620*325*580 | AWM-10A | 9 | 30717 | 0.75 | 56 | 38 | 10*2 | 10*2 | 72 | 620*325*645 | AWM-20 | 12 | 40956 | 1.5 | 150 | 18 | 10*4 | 10*4 | 75 | 620*325*580 | AWM-20A | 12 | 40956 | 0.75 | 135 | 25 | 10*4 | 10*4 | 75 | 620*325*645 | AWM-30 | 12 | 40956 | 2.2 | 315 | 30 | 10*4 | 10*4 | 80 | 620*325*645 | AWM-30-24 | 24 | 81912 | 2.2 | 315 | 30 | 10*4 | 10*4 | 80 | 620*325*645 | - - - - # Wereservetherighttomakechangestotheabovespecificationswithoutnotification. # Besides abovespecifications,we canalsocustom design unique units asyourequest. # Formoremodeldetails,pleasecheckmodelindexontheleft. PIPING AND INSTRUMENT DIAGRAM: APPLICATIONS: Hot Rolling Machine Calender Rolls Wood Presses Laminating Presses Molding Presses Rubber Presses Jacketed Vessels Reactors Heat Exchangers Mixers Printing Machines Asphalt Vulcanizing Presses SERVICES: # Your inquiry related to our products or prices will be replied in 24hours. # We can sendProcess Cooling&Heating Selection Tableto you for selecting suitable units. # We will offer detailed Technical Solution including configuratuion and design idea for you. # OEM&ODM, any your customized units we can help you to design and put into product

The vibration engine (the core system of mechanical drive) of Block machine-44, adopts the classic manufacturing process of gear drive of the high grade automobile engine, which directly guarantees the core system hardware of molding machines manufactured by SINOSUN reaches the international first-class quality. The perfect automatic control system used in the concrete block making system is undoubtedly a rising star when the cost of manpower continuously rises. <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>,

The control panel configuration of the Mobile block making machines-43 uses the imported interface display screen, for molding machinery equipment production block process accurately automatic control, control input are imported components, relevant procedure have interlocking or interlock function, and is equipped with automatic monitoring count function <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>,

Manual and Automatic: the PLC control system of this concrete block making machine adopts integrated control circuits, the entire block making machine equipped with corresponding magnetron travel switch, manual function control button switches etc, reliable operation, convenient and practical operation. Small block making machines-12 is well made, modeling beautiful generous, reliability, simple and easy maintenance adjustment, at the same time this block machine can be realized, which greatly reduce labor intensity of operators. <a href="http://www.sino-blockmachine.com">paving brick machine</a>, <a href="http://www.sino-blockmachine.com">hollow block making machine</a>, <a href="http://www.sino-blockmachine.com">hollow block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">mobile block making machine</a>

QFT12-18 concrete block making machine is the heart of the automatic block production line, is currently on the market selling high-end products. Its structure consists of base material distributing mechanism, color-face material distributing mechanism, molding mechanism, demoulding mechanism, pallet feeder and green blocks belt conveyor. In addition, there are hydraulic, pneumatic and electric control systems that constitute the entire block machine. It can not only produces standard or non-standard load-bearing wall blocks, but also produces various colorful floor interlocking block and lawn block. China <a href="http://www.sino-blockmachine.com"> block machine</a> manufacturer and supplier.We offer " <a href="http://www.sino-blockmachine.com">block making machine</a> including <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>, <a href="http://www.sino-blockmachine.com">hollow block making machine</a>, <a href="http://www.sino-blockmachine.com">hollow block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/">mobile block making machine</a> <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/">small block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/">small and mobile block making machine</a>.

RZD2-45-4 Rotary Hearth Electric Furnace is the international present popular energy conservation continuous type rotary hearth furnace, after using in the motorcycle aluminum alloy steel body heating, crafts and so on hot jacket use. (produces 650, 750, 850, 950, 1200℃ each kind of specification to transfer bottom type electric furnace in addition, may also according to user request making to order) Structure description: Rotary Hearth Electric Furnace structure outer covering becomes by the steel plate and the section welding, the furnace body welds the system full circle densely by the steel plate, lower part the spatial installment has the turntable support, the kingbolt, on the furnace body foot ledger wall the installment has the velocity modulation electrical machinery and the transmission gearbox, through the umbrella type gear and the main axle connection, transfers the bottom type resistance furnace's furance village material to use fan-shaped ultra light quality high strength 0.6g/cm3 to conserve energy the fireproof heat preservation brick, the heat insulating layer uses the aluminum silicate textile fiber felt and the inflation heat preservation powder, the resistance silk thread becomes spiral-shaped, installs according to the average temperature rule in the resistance wire trough, the base also arranges the resistance wire in the special-purpose trough, in such furance the temperature is even, the work piece and the turntable cannot bump with the resistance wire, resistance wireThe service life is long, is not easy to damage. The bung uses the stainless steel plate to make the ledger wall, the built-in aluminum silicate heat preservation, the fire door size extends 350mm, high 580mm, in spandrel wall body whole upward promotion type electrically operated heat preservation fire door, when fire door closure the entire fire door is a circular whole, the fire door sealing property strengthens, the turntable uses the stainless steel to make the 1600m/m turntable, with take load bearing work piece, the entire turntable does not divide the location as the plane, the operators may pile up the work piece willfully, because turntable every 40 minutes turn on lathe biography one week, when work the operators did not look nearly the turntable in the rotation, the fire door starts in addition in a big way, the operators may pass in and out the work piece willfully, but is not limited the time the turntable to be possible in 20-60 The minute revolves one week-long time to modulate velocity willfully, no matter the fire door opens shuts, the turntable from the start work on uninterrupted revolving, not any necessity and the fire door open shut carry on the interconnection, needs to stop when revolves, only need press down on the control electricity cabinet's pause button then, the fire door opens shuts, grasps voluntarily by the operators, presses installs nearby the fire door opens shuts Niu then. Transfers the bottom type resistance furnace's temperature control part to use the microcomputer automatic control temperature, controls the warm precision to be high, the simplicity of operator, by the number obviously demonstrated that in the hypothesis temperature value and the furance the temperature value, and by the XWG electron potentiometer automatic recording craft curve, and has the excess temperature warning function. The entire control system movement precision is high, the energy conservation, does not have the noise, not ultraharmonic hysteresis, the reliability to be extremely high, to internationally advanced control the warm system. More detailed technical___directly sale Tel:027-83372766 83372755 13807177084

QFT9-18 concrete block making machine is operated via visualization system, using the Programmed Logic Controller-Siemens Touch Screen Control System. It is more easy and convenient to use. Electric control system: "simpleton type" program operation. The core of the control system uses the new international level of imported from industrial programmable controller (microcomputer), the function is perfect, compact structure, strong anti-jamming capability and high reliability. Electrical system The control panel configuration of the QFT9-18 concrete block machine uses the imported interface display screen, for molding machinery equipment production block process accurately automatic control, control input are imported components, relevant procedure have interlocking or interlock function, and is equipped with automatic monitoring count function. Different Concrete Blocks/Bricks Manual and automatic QFT9-18 concrete block machine adopts integrated control circuits, the entire equipped with corresponding magnetron trip state switch, manual, function control button switches etc, reliable operation, convenient operation and practical. {(QFT9-18 concrete block making machine is operated via visualization system, using the Programmed Logic Controller-Siemens Touch Screen Control System.It is more easy and convenient to use. Electric control system: "simpleton type" program operation.The core of the control system uses the new international level of imported from industrial programmable controller (microcomputer), the function is perfect, compact structure, strong anti-jamming capability and high reliability.)} <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>, <a href="http://www.sino-blockmachine.com">hollow block making machine</a>, <a href="http://www.sino-blockmachine.com">hollow block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">mobile block making machine</a> <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small and mobile block making machine</a>.

The vibration engine (the core system of mechanical drive) of QFT6-16 <a href="http://www.sino-blockmachine.com">concrete block making machines</a>, adopts the classic manufacturing process of gear drive of the high grade automobile engine, which directly guarantees the core system hardware of molding machines manufactured by SINOSUN reaches the international first-class quality. The perfect automatic control system used in the concrete block making system is undoubtedly a rising star when the cost of manpower continuously rises. Different Concrete Blocks/Bricks Hydraulic Cylinder and Balance System of QFT6-16 Concrete Block Making Machine A is for the main hydraulic cylinder of the concrete block machine, it is used to up and down the block mould. When the vibration table vibrates to form the blocks, it is also could mix the mould. B is the hydraulic cylinder of the mould. It is used to up and down the concrete block mould. C stands for the synchronous axis. There are 2 synchronous axes beside the QFT6-16 <a href="http://www.sino-blockmachine.com">concrete block making machine</a> to keep synchronous when the mould up and down. D is the guide axis. There are 4 guide axes beside the concrete block making machine. These axes would absolutely keep block mould in one horizontal plane. The system characteristics: The Shock Absorbing System of QFT6-16 Concrete Block Making Machine QFT6-16 <a href="http://www.sino-blockmachine.com">concrete block making machine</a> uses the air mat suspender to focus the shock to the vibration table and reduce the damage of the block machine, because of the huge vibration force. The air mat suspender would give the whole vibration force to blocks, let the blocks from compactness completely in 0.5~2.5 Seconds. <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>, <a href="http://www.sino-blockmachine.com">hollow block making machine</a>, <a href="http://www.sino-blockmachine.com">hollow block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">mobile block making machine</a> <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small and mobile block making machine</a>.

QFT 6-16 Concrete Block Making Machine: The vibration engine (the core system of mechanical drive) of QFT6-16 <a href="http://www.sino-blockmachine.com">concrete block making machines</a>, adopts the classic manufacturing process of gear drive of the high grade automobile engine, which directly guarantees the core system hardware of molding machines manufactured by SINOSUN reaches the international first-class quality. The perfect automatic control system used in the concrete block making system is undoubtedly a rising star when the cost of manpower continuously rises. Different Concrete Blocks/Bricks Hydraulic Cylinder and Balance System of QFT6-16 Concrete Block Making Machine A is for the main hydraulic cylinder of the concrete block machine, it is used to up and down the block mould. When the vibration table vibrates to form the blocks, it is also could mix the mould. B is the hydraulic cylinder of the mould. It is used to up and down the concrete block mould. C stands for the synchronous axis. There are 2 synchronous axes beside the QFT6-16 <a href="http://www.sino-blockmachine.com">concrete block making machine</a> to keep synchronous when the mould up and down. D is the guide axis. There are 4 guide axes beside the concrete block making machine. These axes would absolutely keep block mould in one horizontal plane. The system characteristics: The Shock Absorbing System of QFT6-16 Concrete Block Making Machine QFT6-16 <a href="http://www.sino-blockmachine.com">concrete block making machine</a> uses the air mat suspender to focus the shock to the vibration table and reduce the damage of the block machine, because of the huge vibration force. The air mat suspender would give the whole vibration force to blocks, let the blocks from compactness completely in 0.5~2.5 Seconds. Travel Switch: There are 4 solenoid switches on the QFT6-16 concrete block making machine, these solenoid switches would control the mould up and down exactly. Get to know the detail information on our photos. Manual and automatic: The whole<a href="http://www.sino-blockmachine.com">concrete block making machine</a> equipped with corresponding magnetron travel switch, manual, and function control button switches etc. This intelligent electric equipment let this concrete block making machine reliable operation, convenient operation and practical.

QFT4-15concrete block making machine features:Popular design of this concrete block machine: Germany format, famous-and-excellent-product. QFT4-15 concrete block making machine could widely uses fly ash and slag, hold river sands, cement and steel slag, acid water slag, slag, gangue, construction waste other industrial wastes to produce standard bricks, porous brick, hollow blocks, concrete block, paving brick, curbstone and high value-added garden environmental protection products, etc. The hydraulic station of QFT4-15 concrete block making machine uses the reversal valves made by ATOS (Italy), REXROTH (German). These famous reversal valves could run steady and reliable with reasonable design and precise manufacture. The whole system layout of the concrete block machine is reasonable, compact structure, absolute guarantee product yield and precise appearance. Manual and Automatic: the PLC control system of this concrete block making machine adopts integrated control circuits, the entire block making machine equipped with corresponding magnetron travel switch, manual function control button switches etc, reliable operation, convenient and practical operation. {(QFT4-15 Concrete block machine is well made, modeling beautiful generous, reliability, simple and easy maintenance adjustment, at the same time this block machine can be realized, which greatly reduce labor intensity of operators. SINOSUN <a href="http://www.sino-blockmachine.com">concrete block making machine</a> QFT4-15 features low Investment and easy to operate. For local workers, QFT4-15 block making machines could produce high quality block through short time training. For small business investment, QFT4-15 block machine is an ideal choice.QFT4-15 <a href="http://www.sino-blockmachine.com">block making machine</a> could produce concrete blocks, colorful paving blocks and other concrete blocks according to the requirements of the customers though exchange the moudls.)}

QFT9-18 concrete block making machine is operated via visualization system, using the Programmed Logic Controller-Siemens Touch Screen Control System.It is more easy and convenient to use. Electric control system: "simpleton type" program operation.The core of the control system uses the new international level of imported from industrial programmable controller (microcomputer), the function is perfect, compact structure, strong anti-jamming capability and high reliability. Electrical system The control panel configuration of the QFT9-18 concrete block machine uses the imported interface display screen, for molding machinery equipment production block process accurately automatic control, control input are imported components, relevant procedure have interlocking or interlock function, and is equipped with automatic China <a href="http://www.sino-blockmachine.com"> block machine</a> manufacturer and supplier.We offer " <a href="http://www.sino-blockmachine.com">block making machine</a> including <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>, <a href="http://www.sino-blockmachine.com">hollow block making machine</a>, <a href="http://www.sino-blockmachine.com">hollow block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/">mobile block making machine</a> <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/">small block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/">small and mobile block making machine</a>.

web site:http://www.sino-blockmachine.com QFT 12-18 Concrete Block Making Machine Brief Introduction: Automatic Intelligent and High-efficientSINOSUN QFT12-18 concrete block making machine has been called "quite explicit Germany customer new style, the largest and most modern concrete block making machine in China".The design of this concrete block machine is unique, hydraulic engine system adopt international famous brand hydraulic elements. The directional control valves of the block making machine is very soft, fast and smooth in the operation. The hydraulic system has plenty flow of hydraulic oil and pressure, its design flow for 290 liters/minute and pressure for 16 Mpa. QFT12-18 concrete block making machine is the heart of the automatic block production line, is currently on the market selling high-end products. Its structure consists of base material distributing mechanism, color-face material distributing mechanism, molding mechanism, demoulding mechanism, pallet feeder and green blocks belt conveyor. In addition, there are hydraulic, pneumatic and electric control systems that constitute the entire block machine. It can not only produces standard or non-standard load-bearing wall blocks, but also produces various colorful floor interlocking block and lawn block QFT12-18 concrete block making machine in a circuit is adopted in the computer control system, contains the interface for touch-screen or industrial screens screen, allow operators on glass dynamic simulation to see the machine process, and can adjust display molding products of random period can online adjust excitation force size, make the quality of the product to achieve the best. In the touch screen menu, can browse the activation of the concrete block making machine. In addition, the computer system is set for fault diagnosis of "package" intelligent, once use of malfunction, computational opportunity to tell the operator how to exclude. Advantages of Vibration Engine The vibration system is the heart of the concrete block machine, this system has two 15 KW vibration motors with Schneider ATV- Type conversion governor, from 0-65 Hz only 1-2 seconds response time, the vibration table produce vertical amplitude for 1-2 mm, also could produce for 33 tons of giant vibration force rapidly, and system produces excitation to acceleration overleap 20g (g = 9.81 meters seconds), more than Europe similar type is generally 15g, making the materials for 6 seconds of rapid prototyping. In ordinary weight ratio condition, block strength more than 15 Mpa. In order to prevent products weight and pressure head added stress, affect the vibration effect, the company borrowed Euramerican professional company mould vibration model of technology in mould box of classics, the vibration link parts joined four groups of American FIRESTONE company mattress buffer, and add another one set of yijing retreat device, made under the vibrators vibration force will not be restrained, completely can get sufficient play. China <a href="http://www.sino-blockmachine.com"> block machine</a> manufacturer and supplier.We offer " <a href="http://www.sino-blockmachine.com">block making machine</a> including <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>, <a href="http://www.sino-blockmachine.com">hollow block making machine</a>, <a href="http://www.sino-blockmachine.com">hollow block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">mobile block making machine</a> <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small and mobile block making machine</a>.

web site:http://www.sino-blockmachine.com QFT 9-18 Concrete Block Making Machine Brief Introduction: ★ The vibrator of the concrete block machine adopts the high-speed heavy structure, which greatly prolongs its service life. ★ In the program of purchasing concrete block machine for building material plant, investors can choose different equipment matching according to their need. The Vibration System： The special design of Vibration + Double vibration motors. There are 4 special design excitation blocks in the vibration box,they could adjust to different materials with variable amplitude, it just needs 0.5~2.5 Seconds to form the concrete blocks compactness completely. The vibration box uses two frequency conversion motors (with Schneider ATV variable-frequency governor) and two pieces of transmission shafts in the vibration table. ntelligent PLC Controller QFT9-18 concrete block making machine is operated via visualization system, using the Programmed Logic Controller-Siemens Touch Screen Control System.It is more easy and convenient to use. Electric control system: "simpleton type" program operation.The core of the control system uses the new international level of imported from industrial programmable controller (microcomputer), the function is perfect, compact structure, strong anti-jamming capability and high reliability. Electrical system The control panel configuration of the QFT9-18 concrete block machine uses the imported interface display screen, for molding machinery equipment production block process accurately automatic control, control input are imported components, relevant procedure have interlocking or interlock function, and is equipped with automatic monitoring count function. China <a href="http://www.sino-blockmachine.com"> block machine</a> manufacturer and supplier.We offer " <a href="http://www.sino-blockmachine.com">block making machine</a> including <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>, <a href="http://www.sino-blockmachine.com">hollow block making machine</a>, <a href="http://www.sino-blockmachine.com">hollow block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">mobile block making machine</a> <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small and mobile block making machine</a>.

web site:http://www.sino-blockmachine.com QFT 6-16 Concrete Block Making Machine Brief Introduction: ★The vibration engine (the core system of mechanical drive) of QFT6-16 concrete block making machine, adopts the classic manufacturing process of gear drive of the high grade automobile engine, which directly guarantees the core system hardware of molding machines manufactured by SINOSUN reaches the international first-class quality. ★The perfect automatic control system used in the concrete block making system is undoubtedly a rising star when the cost of manpower continuously rises. The Shock Absorbing System: QFT6-16 concrete block machine uses the air mat suspender to focus the shock to the vibration table and reduce the damage of the block machine,because of the huge vibration force.The air mat suspender would give the whole vibration force to blocks,let the blocks from compactness completely in 0.5~2.5 Seconds. China <a href="http://www.sino-blockmachine.com"> block machine</a> manufacturer and supplier.We offer " <a href="http://www.sino-blockmachine.com">block making machine</a> including <a href="http://www.sino-blockmachine.com">concrete block making machine</a>, <a href="http://www.sino-blockmachine.com">concrete block machine</a>, <a href="http://www.sino-blockmachine.com">concrete paving machine</a>, <a href="http://www.sino-blockmachine.com">paving brick machine</a>, <a href="http://www.sino-blockmachine.com">hollow block making machine</a>, <a href="http://www.sino-blockmachine.com">hollow block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">mobile block making machine</a> <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small block machine</a>, <a href="http://www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ ">small and mobile block making machine</a>.

RJ2 series of high temperature pit furnace is the national standarded energy-saving cycle operations pit furnace, the temperature of 1200℃ rated, mainly for steel, high-speed steel, high manganese steel, high chrome steel, Shaft, pipes and other metal materials and machinery parts in the general atmosphere or simple protection for normalizing, annealing, with heat treatment, such as quenching. Power 15-4900KW; Furnace diameter is ￠300mm-￠11m, the largest to reach 48m depth. Structure description: RJ2 series of high temperature pit furance structure, the shell are welded by steel plate and steel cylindrical furnace, all of them are used in all enclosed welding. Lining using ultra-light 0.6g/cm3 energy-saving vacuum insulation ball refractory brick building. Lining home with the furnace shell laminated aluminum mat acid insulation, insulation powder expansive space filled. Resistance silk used 0Cr27Al7Mo2 high resistance alloy wire around the spire installed in the furnace of dormant Wire and Bricks. Lid using manual or electric movements. If users need to protect the atmosphere workpiece reduce oxidation, can be installed in a stainless steel lid three Pentanes injection, infusion methanol or kerosene, to produce simple protective atmosphere, in the lower part of the furnace installation of nitrogen gas pipeline, nitrogen-protection or washed out into the flammable gas to prevent an explosion accident. To ensure safe operation in the vicinity of lifting bodies with limit switch, the switch with the high temperature resistance furnace control cabinet Well Interlocking power, lid-power shutdown. When the lid is opened time-switch control to cut off power supply, heating elements at the same time cutting off the power supply to ensure safe operation. Well-type high temperature resistance furnace factory supporting automatic temperature control cabinet, thermocouple. More detailed technical___directly sale Tel:027-83372766 83372755 13807177084 Technical parameters: Parameters Name Unit Model RJ2-20-12 RJ2-45-12 RJ2-50-12 RJ2-60-12 RJ2-75-12 RJ2-80-12 RJ2-80-12 Rating Power KW 20 45 50 60 75 80 80 Rating Voltage V 380 380 380 380 380 380 380 Highest Temperature ℃ 1200 1200 1200 1200 1200 1200 1200 Working Temperature ℃ 1200 1200 1200 1200 1200 1200 1200 Phase Number 3 3 3 3 3 3 3 Hearth size Dia. mm Φ300 Φ600 Φ600 Φ800 Φ600 Φ800 Φ800 Height mm 700 600 800 800 1600 1000 1600 heating saction 1 1 1 1 2 1 2 heating element 串 Y Y Y YY YY YY heating-up time h ≤2.5 ≤2.5 ≤2.5 ≤3 ≤2.5 ≤3 ≤3.5 lose power KW ≤8 ≤18 ≤20 ≤24 ≤22 ≤17 ≤32 control accuracy ℃ ±1 ±1 ±1 ±1 ±1 ±1 ±1 niformity ℃ ±5-8 ±5-8 ±5-8 ±5-8 ±5-8 ±5-8 ±5-8 Maximum Loading Kg 150 350 350 500 700 800 1200 Weight Kg 1600 2100 2400 3000 4000 3200 4800

The GR2 series Crucible Melting Electric Resistance is a sort of energy-saving Crucible Melting furnace, it is mainly used for melting smelting like aluminum, zinc, lead, tin, cadmium, and other low melting point and non-ferrous metals as well its alloys, and the die casting machine generally support. Structure description: This series of Crucible Melting Electric Resistance Furnace, structure: the furnace shell are made of welded steel plate and steel. Lining adopt energy-saving super lightweight refractory brick masonry from beads, furnace and the furnace shell villages trapped between home silicate fiber carpets, furnace shell and silica blanket insulation powder expansive space filled. Heating elements use 0Cr25Al5 high resistance alloy wire around the spire, and is installed on the bricks which is around the furnace .around There are two rotating semicircular lid at the top of the furnace. Thermocouple insert the furnace from the side sometime. Crucible Melting Electric Resistance Furnace control its temperature automatically by control temperature control cabinet. More detailed technical___directly sale Tel:027-83372766 83372755 13807177084 Technical parameters: Parameters Name Unit Model GR2-5-10 GR2-12-10 GR2-30-10 GR2-40-9 GR2-60-8 GR2-75-8 Rating Power KW 5 12 30 40 60 75 Rating Voltage V 220 380 380 380 380 380 Working Temperature ℃ 850 850 850 850 850 850 Phase Number 1 3 3 3 3 3 Hearth size Dia. mm Φ170 Φ245 Φ325 Φ375 Φ500 Φ500 Height mm 200 265 375 430 600 870 Heating Element Y Y Y △ YY Heating-up Time h ≤2.5 ≤2.5 ≤2.5 ≤2.5 ≤2.5 ≤2.5 outline dimension Dia. mm Φ550 Φ700 Φ850 Φ950 Φ500 Φ500 Hearth mm 600 750 860 1200 600 870 Aluminium melting Kg 5 20 60 84 150 270 loading Kg 150 380 580 1500 1740 2300

QFT 12-18 Concrete Block Making Machine Brief Introduction: Automatic Intelligent and High-efficient SINOSUN QFT12-18 concrete block making machine has been called "quite explicit Germany customer new style, the largest and most modern concrete block making machine in China". The design of this concrete block machine is unique, hydraulic engine system adopt international famous brand hydraulic elements. The directional control valves of the block making machine is very soft, fast and smooth in the operation. The hydraulic system has plenty flow of hydraulic oil and pressure, its design flow for 290 liters/minute and pressure for 16 Mpa. QFT12-18 concrete block making machine is the heart of the automatic block production line, is currently on the market selling high-end products. Its structure consists of base material distributing mechanism, color-face material distributing mechanism, molding mechanism, demoulding mechanism, pallet feeder and green blocks belt conveyor. In addition, there are hydraulic, pneumatic and electric control systems that constitute the entire block machine. It can not only produces standard or non-standard load-bearing wall blocks, but also produces various colorful floor interlocking block and lawn block. QFT12-18 concrete block making machine in a circuit is adopted in the computer control system, contains the interface for touch-screen or industrial screens screen, allow operators on glass dynamic simulation to see the machine process, and can adjust display molding products of random period can online adjust excitation force size, make the quality of the product to achieve the best. In the touch screen menu, can browse the activation of the concrete block making machine. In addition, the computer system is set for fault diagnosis of "package" intelligent, once use of malfunction, computational opportunity to tell the operator how to exclude. Advantages of Vibration Engine The vibration system is the heart of the concrete block machine, this system has two 15 KW vibration motors with Schneider ATV— Type conversion governor, from 0-65 Hz only 1-2 seconds response time, the vibration table produce vertical amplitude for 1-2 mm, also could produce for 33 tons of giant vibration force rapidly, and system produces excitation to acceleration overleap 20g (g = 9.81 meters seconds), more than Europe similar type is generally 15g, making the materials for 6 seconds of rapid prototyping. In ordinary weight ratio condition, block strength more than 15 Mpa. In order to prevent products weight and pressure head added stress, affect the vibration effect, the company borrowed Euramerican professional company mould vibration model of technology in mould box of classics, the vibration link parts joined four groups of American FIRESTONE company mattress buffer, and add another one set of yijing retreat device, made under the vibrators vibration force will not be restrained, completely can get sufficient play. China <a href="www.sino-blockmachine.com"> block machine</a> manufacturer and supplier.We offer " <a href="www.sino-blockmachine.com">block making machine</a> including <a href="www.sino-blockmachine.com">concrete block making machine</a>, <a href="www.sino-blockmachine.com">concrete block machine</a>, <a href="www.sino-blockmachine.com">concrete paving machine</a>, <a href="www.sino-blockmachine.com">paving brick machine</a>, <a href="www.sino-blockmachine.com">hollow block making machine</a>, <a href="www.sino-blockmachine.com">hollow block machine</a>, <a href="www.sino-blockmachine.com">mobile block making machine</a>.

QFT 9-18 Concrete Block Making Machine Brief Introduction: The vibrator of the concrete block machine adopts the high-speed heavy structure, which greatly prolongs its service life. In the program of purchasing concrete block machine for building material plant, investors can choose different equipment matching according to their need. The Vibration System of the concrete block machine The special design of Vibration + Double vibration motors. There are 4 special design excitation blocks in the vibration box. They could adjust to different materials with variable amplitude, it just needs 0.5~2.5 Seconds to form the concrete blocks compactness completely. The vibration box uses two frequency conversion motors (with Schneider ATV variable-frequency governor) and two pieces of transmission shafts in the vibration table. This is special design in our company. Intelligent PLC Controller QFT9-18 concrete block making machine is operated via visualization system, using the Programmed Logic Controller-Siemens Touch Screen Control System. It is more easy and convenient to use. Electric control system: "simpleton type" program operation. The core of the control system uses the new international level of imported from industrial programmable controller (microcomputer), the function is perfect, compact structure, strong anti-jamming capability and high reliability. Electrical system The control panel configuration of the QFT9-18 concrete block machine uses the imported interface display screen, for molding machinery equipment production block process accurately automatic control, control input are imported components, relevant procedure have interlocking or interlock function, and is equipped with automatic monitoring count function Manual and automatic QFT9-18 concrete block machine adopts integrated control circuits, the entire equipped with corresponding magnetron trip state switch, manual, function control button switches etc, reliable operation, convenient operation and practical. China <a href="sino-blockmachine.com"> block machine</a> manufacturer and supplier.We offer " <a href="sino-blockmachine.com">block making machine</a> including <a href="sino-blockmachine.com">concrete block making machine</a>, <a href="sino-blockmachine.com">concrete block machine</a>, <a href="sino-blockmachine.com">concrete paving machine</a>, <a href="sino-blockmachine.com">paving brick machine</a>, <a href="sino-blockmachine.com">hollow block making machine</a>, <a href="sino-blockmachine.com">hollow block machine</a>, <a href="sino-blockmachine.com">mobile block making machine</a>.

QFT 6-16 Concrete Block Making Machine The vibration engine (the core system of mechanical drive) of QFT6-16 concrete block making machine, adopts the classic manufacturing process of gear drive of the high grade automobile engine, which directly guarantees the core system hardware of molding machines manufactured by SINOSUN reaches the international first-class quality. The perfect automatic control system used in the concrete block making system is undoubtedly a rising star when the cost of manpower continuously rises. Hydraulic Cylinder and Balance System of QFT6-16 Concrete Block Making Machine A is for the main hydraulic cylinder of the concrete block machine, it is used to up and down the block mould. When the vibration table vibrates to form the blocks, it is also could mix the mould. B is the hydraulic cylinder of the mould. It is used to up and down the concrete block mould. C stands for the synchronous axis. There are 2 synchronous axes beside the QFT6-16 concrete block making machine to keep synchronous when the mould up and down. D is the guide axis. There are 4 guide axes beside the concrete block making machine. These axes would absolutely keep block mould in one horizontal plane. The Shock Absorbing System of QFT6-16 Concrete Block Making Machine QFT6-16 concrete block machine uses the air mat suspender to focus the shock to the vibration table and reduce the damage of the block machine, because of the huge vibration force. The air mat suspender would give the whole vibration force to blocks, let the blocks from compactness completely in 0.5~2.5 Seconds. China [url=http://www.sino-blockmachine.com]block machine[/url] manufacturer and supplier.We offer " [url=http://www.sino-blockmachine.com]block making machine[/url] including [url=http://www.sino-blockmachine.com]concrete block making machine[/url], [url=http://www.sino-blockmachine.com]concrete block machine[/url], [url=http://www.sino-blockmachine.com]paving brick machine[/url], [url=http://www.sino-blockmachine.com]concrete paving machine[/url], [url=http://www.sino-blockmachine.com]hollow block making machine[/url], [url=http://www.sino-blockmachine.com]hollow block machine[/url], [url=http://www.sino-blockmachine.com]mobile block making machine[/url].

QFT 4-15 Concrete Block Making Machine Brief Introduction SINOSUN concrete block making machine QFT4-15 features low Investment and easy to operate. For local workers, QFT4-15 block making machines could produce high quality block through short time training. For small business investment, QFT4-15 block machine is an ideal choice. QFT4-15 block making machine could produce concrete blocks, colorful paving blocks and other concrete blocks according to the requirements of the customers though exchange the moulds QFT4-15 concrete block making machine features:Popular design of this concrete block machine: Germany format, famous-and-excellent-product. QFT4-15 concrete block making machine could widely uses fly ash and slag, hold river sands, cement and steel slag, acid water slag, slag, gangue, construction waste other industrial wastes to produce standard bricks, porous brick, hollow blocks, concrete block, paving brick, curbstone and high value-added garden environmental protection products, etc. The hydraulic station of QFT4-15 concrete block making machine uses the reversal valves made by ATOS (Italy), REXROTH (German). These famous reversal valves could run steady and reliable with reasonable design and precise manufacture. The whole system layout of the concrete block machine is reasonable, compact structure, absolute guarantee product yield and precise appearance Manual and Automatic: the PLC control system of this concrete block making machine adopts integrated control circuits, the entire block making machine equipped with corresponding magnetron travel switch, manual function control button switches etc, reliable operation, convenient and practical operation. QFT4-15 Concrete block machine is well made, modeling beautiful generous, reliability, simple and easy maintenance adjustment, at the same time this block machine can be realized, which greatly reduce labor intensity of operators. hollow block making machine:www.sino-blockmachine.com concrete block making machine (QFT 6-16 /QFT 4-15 /QFT 12-18 /QFT 9-18 /)：www.sino-blockmachine.com/Concrete-Block-Making-Machine/ Continuous Asphalt Mixing Plant：www.sino-blockmachine.com/Continuous-Asphalt-Mixing-Plant/ hollow block making machine：www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ hollow block machine：www.sino-blockmachine.com/Small-and-Mobile-Block-Making-Machine/ hollow block making machine: www.sino-blockmachine.com hollow block machine:www.sino-blockmachine.com mobile block making machine:www.sino-blockmachine.com

T-75-5 Pusher type Tempering Furnace is the energy conservation high accuracy controls the warm high average temperature continued operation electric furance. Uses 3 area 3 high speed heated air circulation air blower, the stainless steel Shuanghuan air current circulates completely the air flue, causes in the electric furance the work piece temperature to be even. Mainly uses to the drawing temperature uniformity request extremely high thin shape elastic metal work piece as well as each kind of precision machinery components tempering heat treatment. If to hangs the clothes rack stalloy spring clip tempering heat treatment furnace temperature uniformity to reach ±1℃. Structure description: T-75-5 Pusher type High Temperature Tempering Furnace is mainly made by the section and the steel plate, the furnace lining uses the 0.6g/cm3 ultra light quality micro bead energy conservation refractory brick, the furnace lining and the furnace shell band uses the aluminum silicate textile fiber heat preservation. Belongs to the model energy conservation furnace lining, the electricity saving 40%. The heating unit uses high temperature resistance wire 0Cr25Al5, the electric furance uses three area heatings, three areas control warm, in each area is equipped with the independent vacuum air blower and the stainless steel air flue. The hot blast circulates evenly from the furance up-wind leaf through 45° the stainless steel air deflector from the chamber both sides to the chamber lower part, through the suspension fork type stainless steel roller conveyer lower part the air flue, circulates the material plate base, passes through the material plate stainless steel mesh, through all work pieces, circulates evenly above material plate's return air Daoban, forms a complete heated air circulation cycle, the high speed heated air circulation, causes in the material plate the work piece temperature to be even so repeatedly. The temperature control controls the warm cabinet district independent control three area temperatures automatically by the microcomputer high accuracy procedure. Adds PID through each area's microcomputer fuzzy logic operation to operate automatic high accuracy non-contact 8 section of programmed control each area the temperature, causes the electric furance according to the user hypothesis most superior heat treatment craft temperature procedure curve movement. Computer basis different temperature and count-down and output different best power, when heat preservation the holding power might the automatic control output, save the electrical energy highly. Achieves when any hypothesis craft temperature the high accuracy controls the temperate high accuracy constant temperature, overcomes the thermal lag, the temperature ultraharmonic hysteresis, controls the warm precision ±1-3℃. May act according to installs the furance quantity and the technological requirement automatic and manual adjusts the output size from 0-100% (0-75KW). The silicon-controlled rectifier makes the non-contact make-and-break. Can the automatic recording craft curve. Has the excess temperature warning and the automatic power failure function. The throwout lever fire door uses the air cylinder. Expects the plate when the furance internal heating is 9. The entire fire door make and break and the material plate passes in and out is the automatic procedure completely. Expects the plate to be possible to adjust willfully in the furance intercycle in 30 second - 99 minute. After installing work piece material plate drawing a charge, may carry on the forced-air cooling temperature decrease on the glide rear frame by the lower part air blower. More detailed technical___directly sale Tel: 027-83372766 83372755 13807177084

RJ2 series Mid-temperature pit Furnace is the national standarded energy-saving cycle operations Pit Furnace, mainly for steel parts, Shaft, pipes and other metal materials and machinery parts in the general atmosphere or simple protection for normalizing, annealing, quenching, and other heat treatment used. Structure description: RJ2 series of high temperature pit furance structure, the shell are welded by steel plate and steel cylindrical furnace, all of them are used in all enclosed welding. Lining using ultra-light 0.6g/cm3 energy-saving vacuum insulation ball refractory brick building. Lining home with the furnace shell laminated aluminum mat acid insulation, insulation powder expansive space filled. Resistance silk used 0Cr27Al7Mo2 high resistance alloy wire around the spire installed in the furnace of dormant Wire and Bricks. Lid using manual or electric movements. In order to make uniform heating workpiece, medium and large pit furnace temperature control sections, in accordance with the air temperature rise of temperature wire arrangement method used reasonable distribution of power, the furnace temperature from top to bottom in order to ensure uniform consistency. To ensure safe operation, in the vicinity of body movements with limit switch, the switch and power control cabinet Well furanceInterlock, lid closed when connected to power. When the lid is opened time-switch control to cut off power supply, heating elements at the same time cutting off the power supply to ensure safe operation. Mid-temperature pit Furnace supporting automatic temperature control cabinet, thermocouple. More detailed technical___directly sale Tel:027-83372766 83372755 13807177084

Detailed Product Description Automatic brick machine 1.Advance vibrating technology 2.Feeding and forming by different vibrating mode 3.60000pcs/8hours High speed with reasonable price brick making machine in China We are a professional manufacturer in China, only focus on manufacturing block machine line. brick machine We provide leading technologies in block industry, from a standalone machine to a whole automated line, with world class flexibility, quality and cost-efficiency. We have already exported our machines to Asia, US, and Europe, India, many customers come back to order more lines. Technology parameter Outside size 9000×1800×2700(mm) Weight 11000KG Rated pressure 21MP Vibration frequency 50HZ;3000-4000r/min Pallet size 1100×560×20(mm) Power 45kw daily output in 8hours Standard brick (240×115×53)60000pcs Multi-hole brick(240×115×90)30000pcs Hollow brick (390×190×190)10000pcs

Introduction of new type semi automatic brick machine The new type fly ash bricks production line is a low investment high profit brick making project,the project consists of a fork lift truck, a edge mill, a storage feeder,a conveyor and a brick machine;simple production line,easy operation,low investment,big return! The brick machine is a new type of multifunction brick making equipment,it can use clay,fly ash, slag, rock flour, river sand, mineral waste,coal gangue, weathered granite, building & industrial waste, steel scoria etc. as raw materials; Attention please: only green bricks used clay as materials need to be fired or baked. Extraordinary features of semi automatic brick machine 1. MZJ600-3 is a new type of bricks machine,it can produce clay bricks as well as flyash bricks with low cost, high-intensity and high-quality. 2. Mechanical vibration and double-sided pressure, good product quality, angularity, non-sticky mold,and not jam mold; 3. Airtight drive motor, easy operation, easy maintenance; 4. Mainly produce solid standard brick, by changing mold, it can also make blind hole bricks etc. 5.This machine was added vibration pressure exhaust structure , forced feeding structure, have advantages of small power, high forming pressure, enough and even feeding, high density etc.Especially can press high-volume clay bricks as well as unfired bricks without gap due to the unique design. 6.No need pallets, palletizing directly; Highly automation,low investment, easy installation, low failure rate, high capacity, small area occupation, short construction period, less production personnel, fast return on investment, high economic efficiency. Main technical parameters of new type semi automatic brick machine Production capacity bricks(pcs/h):4000 Most tremendous pressure(t):600(Mechanical vibration and double-sided pressure ) Each time formation(pcs/once):3 Make bricks specification(mm): 240*115*53 240*115*90 240*190*90 240*240*90 Motor of host machine (kw):37 Weight (t):14.3 Dimension (mm): 2530*2450*3000 Changing waste into valuable,Buy new type semi automatic brick machine from us now!

Introduction of new type small automatic brick machine The new type cement bricks production line is a low investment high profit brick making project,the project consists of a fork lift truck, a edge mill, a storage feeder,a conveyor and a brick machine;simple production line,easy operation,low investment,big return! The brick machine is a new type of multifunction brick making equipment,it can use clay,fly ash, slag, rock flour, river sand, mineral waste,coal gangue, weathered granite, building & industrial waste, steel scoria etc. as raw materials; Attention please: only green bricks used clay as materials need to be fired or baked. Extraordinary features of small automatic brick machine 1. MZJ600-3 is a new type of bricks machine,it can produce clay bricks as well as cement bricks with low cost, high-intensity and high-quality. 2. Mechanical vibration and double-sided pressure, good product quality, angularity, non-sticky mold,and not jam mold; 3. Airtight drive motor, easy operation, easy maintenance; 4. Mainly produce solid standard brick, by changing mold, it can also make blind hole bricks etc. 5.This machine was added vibration pressure exhaust structure , forced feeding structure, have advantages of small power, high forming pressure, enough and even feeding, high density etc.Especially can press high-volume clay bricks as well as unfired bricks without gap due to the unique design. 6.No need pallets, palletizing directly; Highly automation,low investment, easy installation, low failure rate, high capacity, small area occupation, short construction period, less production personnel, fast return on investment, high economic efficiency. Main technical parameters of small automatic brick machine Production capacity bricks(pcs/h):4000 Most tremendous pressure(t):600(Mechanical vibration and double-sided pressure ) Each time formation(pcs/once):3 Make bricks specification(mm): 240*115*53 240*115*90 240*190*90 240*240*90 Motor of host machine (kw):37 Weight (t):14.3 Dimension (mm): 2530*2450*3000 Changing waste into valuable,Buy new type small automatic brick machine from us now!

Introduction of new type blind hole brick machine The new type blind hole bricks production line is a low investment high profit brick making project,the project consists of a fork lift truck, a edge mill, a storage feeder,a conveyor and a brick machine;simple production line,easy operation,low investment,big return! The brick machine is a new type of multifunction brick making equipment,it can use clay,fly ash, slag, rock flour, river sand, mineral waste,coal gangue, weathered granite, building & industrial waste, steel scoria etc. as raw materials; Attention please: only green bricks used clay as materials need to be fired or baked. Extraordinary features of new type blind hole brick machine 1. MZJ600-3 is a new type of bricks machine,it can produce clay bricks as well as cement bricks with low cost, high-intensity and high-quality. 2. Mechanical vibration and double-sided pressure, good product quality, angularity, non-sticky mold,and not jam mold; 3. Airtight drive motor, easy operation, easy maintenance; 4. Mainly produce solid standard brick, by changing mold, it can also make blind hole bricks etc. 5.This machine was added vibration pressure exhaust structure , forced feeding structure, have advantages of small power, high forming pressure, enough and even feeding, high density etc.Especially can press high-volume clay bricks as well as unfired bricks without gap due to the unique design. 6.No need pallets, palletizing directly; Highly automation,low investment, easy installation, low failure rate, high capacity, small area occupation, short construction period, less production personnel, fast return on investment, high economic efficiency. Main technical parameters of new type blind hole brick machine Production capacity bricks(pcs/h):4000 Most tremendous pressure(t):600(Mechanical vibration and double-sided pressure ) Each time formation(pcs/once):3 Make bricks specification(mm): 240*115*53 240*115*90 240*190*90 240*240*90 Motor of host machine (kw):37 Weight (t):14.3 Dimension (mm): 2530*2450*3000 Changing waste into valuable,Buy new type blind hole brick machine from us now!

Products Lists

Send Inquiry