+

Our PRFC beer filler use bottle base handling method and bottles are lifted at filling position. For different bottle sizes, height adjustment is required for different machine units and change over parts need to be replaced. Conveyor height adjustment is not required. ISO-bar filling is used and gas containing liquid can be filled. Filling level is stable. Spring type rinsing clamp is used. Empty bottle overturns by 180° Automatically along guide track to rinse bottle inside. Plum blossom shaped rinsing nozzle is used to give high rinsing efficiency by rinsing bottle bottom from different angles. Filled bottles are sealed with crown corks to ensure airtight sealing. Crown corks are sorted by inclined centrifugal sorter that will not damage cork surface. Cap hopper will signal the cap conveyor to feed caps automatically in case of cap absence. The machine is capable of recirculation CIP cleaning. Other functions include waiting in case of bottle absence, automatic stop in case of cap absence in cap chute, etc. 1.2 Main usage and application range Mainly used to fill beer and carbonated soft drinks. 1.3 Product name and model number Product name__Rinser/Filler/Capper Model number__PBCGY24 1.4 Composition and meaning of model number P_Beer; B_Glass bottle; C_Rinser; G_Filler; Y_Capper 1.5 Safety This machine is fabricated according to corresponding safety rules. The machine structure enables its non-hazardous operation in time of regulation, service, maintenance, repair and troubleshooting. During performing of such job, the machine ought to be turned by hand or using Jog switch. In case those safety devices shall be deactivated during maintenance and repair, this must be done by trained and authorized persons. Check that there is no tools or rags in the bottle channel and all moving parts are not obstructed every time before switching on power. It is very important to read all safety rules and instructions to dedicated safety personnel carefully. In addition, keep following points clearly in mind: A. Do not wear slack working clothes; B. Do up long hair by wearing hair net or cap; C. When handling chemicals, hot water or steam, wear protective clothes as stipulated to prevent corrosive injury. D. It is forbidden to shut off power supply abruptly when the filler is in normal operation. Welcome to inspect I PRFC beer filler n our factory.

Our PRFC glass bottles beer bottling equipment use bottle base handling method and bottles are lifted at filling position. For different bottle sizes, height adjustment is required for different machine units and change over parts need to be replaced. Conveyor height adjustment is not required. ISO-bar filling is used and gas containing liquid can be filled. Filling level is stable. Spring type rinsing clamp is used. Empty bottle overturns by 180° Automatically along guide track to rinse bottle inside. Plum blossom shaped rinsing nozzle is used to give high rinsing efficiency by rinsing bottle bottom from different angles. Filled bottles are sealed with crown corks to ensure airtight sealing. Crown corks are sorted by inclined centrifugal sorter that will not damage cork surface. Cap hopper will signal the cap conveyor to feed caps automatically in case of cap absence. The machine is capable of recirculation CIP cleaning. Other functions include waiting in case of bottle absence, automatic stop in case of cap absence in cap chute, etc. 1.2 Main usage and application range Mainly used to fill beer and carbonated soft drinks. 1.3 Product name and model number Product name__Rinser/Filler/Capper Model number__PBCGY24 1.4 Composition and meaning of model number P_Beer; B_Glass bottle; C_Rinser; G_Filler; Y_Capper 1.5 Safety This machine is fabricated according to corresponding safety rules. The machine structure enables its non-hazardous operation in time of regulation, service, maintenance, repair and troubleshooting. During performing of such job, the machine ought to be turned by hand or using Jog switch. In case those safety devices shall be deactivated during maintenance and repair, this must be done by trained and authorized persons. Check that there is no tools or rags in the bottle channel and all moving parts are not obstructed every time before switching on power. It is very important to read all safety rules and instructions to dedicated safety personnel carefully. In addition, keep following points clearly in mind: A. Do not wear slack working clothes; B. Do up long hair by wearing hair net or cap; C. When handling chemicals, hot water or steam, wear protective clothes as stipulated to prevent corrosive injury. D. It is forbidden to shut off power supply abruptly when the filler is in normal operation. Welcome to inspect PRFC glass bottles beer bottling equipment in our factory

Our PRFC beer filling machine use bottle base handling method and bottles are lifted at filling position. For different bottle sizes, height adjustment is required for different machine units and change over parts need to be replaced. Conveyor height adjustment is not required. ISO-bar filling is used and gas containing liquid can be filled. Filling level is stable. Spring type rinsing clamp is used. Empty bottle overturns by 180° Automatically along guide track to rinse bottle inside. Plum blossom shaped rinsing nozzle is used to give high rinsing efficiency by rinsing bottle bottom from different angles. Filled bottles are sealed with crown corks to ensure airtight sealing. Crown corks are sorted by inclined centrifugal sorter that will not damage cork surface. Cap hopper will signal the cap conveyor to feed caps automatically in case of cap absence. The machine is capable of recirculation CIP cleaning. Other functions include waiting in case of bottle absence, automatic stop in case of cap absence in cap chute, etc. 1.2 Main usage and application range Mainly used to fill beer and carbonated soft drinks. 1.3 Product name and model number Product name__Rinser/Filler/Capper Model number__PBCGY24 1.4 Composition and meaning of model number P_Beer; B_Glass bottle; C_Rinser; G_Filler; Y_Capper 1.5 Safety This machine is fabricated according to corresponding safety rules. The machine structure enables its non-hazardous operation in time of regulation, service, maintenance, repair and troubleshooting. During performing of such job, the machine ought to be turned by hand or using Jog switch. In case those safety devices shall be deactivated during maintenance and repair, this must be done by trained and authorized persons. Check that there is no tools or rags in the bottle channel and all moving parts are not obstructed every time before switching on power. It is very important to read all safety rules and instructions to dedicated safety personnel carefully. In addition, keep following points clearly in mind: A. Do not wear slack working clothes; B. Do up long hair by wearing hair net or cap; C. When handling chemicals, hot water or steam, wear protective clothes as stipulated to prevent corrosive injury. D. It is forbidden to shut off power supply abruptly when the filler is in normal operation. Welcome to inspect PRFC beer filling machine in our factory.

TFS, crown corks,crown caps,metal caps,bottle caps Skype:ruby.wei11 Product Description Tin Free Steel(TFS) for metal crown cap, metal packaging Operated standard: JIS G3315 Thickness: 0.15-0.5mm Width: 600-1000mm Base plate: SPCC, MR Annealing types: BA/CA Surface finish: Bright, Stone, Matte, Silver Chrome plating weight: >=60mg/m2 Hardness: T1-T5, DR8, DR9, DR10 Packing: For coils: Anti-rust paper +metal cover +corner protected +wood skid Laded into 20 feet container with max weight 25 tons For sheets: Thin plastic film +rust-proof paper +metal cover +metal angles + straps + pallet. Loaded in 20 feet container with max weight 25 tons The tin free plate(TFS) can be used for various crown cans, easy-open cans, lug type caps, bottom covers of various packaging cans etc. We can produce according to the requiement of user!

Printed and unprinted metal crowns in various size and specifications Type: Dry blend Double Ring Crown Corks Closure Crown Corks Beer Bottle Caps Soft Drink Bottle Caps Puff lined crown caps Crown Corks Application: Bottle crowns are used in varied industries such as beverage, alcohol, dairy, food processing etc.