+

H-type Single Point mechanical Press pressing brake machine shearing machinery H-type Single Piont Press/power press/h frame power press/processing machine Steel plate welded slide block Main Structure Features: Steel plate welded framework structure machine body with four masts to ensure the high strength of the machine body Imported dry-type friction clutch,and wet-type clutch optional for JM31-160-400 Hydraulic overload protection device ,imported pneumatic pump,imported sealing ring Steel plate welded slide block Four-corner eight-side precision ling guideway Electrical die adjustment,digital display Raising-up balance cylinder ,inported sealing ring. Duplex electromagnetic valves imported from Japan Three interlinked pieces for air source imported from abroad PLC of international brand name Imported Buttons,indicators,AC contactors,air switches and other control devices imported form abroad Thin oil automatical lubrication system Slidestroke adjustable as optional - - - - Model | PSH-80 | PSH-125 | PSH-160 | PSH-200 | PSH-250 | PSH-315 | PSH-400 | PSH-500 | PSH-630 | Nominal pressure | KN | 800 | 1250 | 1600 | 2000 | 2500 | 3150 | 4000 | 5000 | 6300 | Nominal pressure stroke | mm | 4 | 5 | 6 | 6 | 7 | 8 | 8 | 10 | 13 | Stroke of slide | mm | 120 | 140 | 160 | 180 | 220 | 250 | 250 | 250 | 280 | Strokes | S.P.M | 50-80 | 45-60 | 35-55 | 30-50 | 30-45 | 25-40 | 25-35 | 20-30 | 15-20 | Die height adjustment | mm | 80 | 90 | 100 | 110 | 110 | 120 | 120 | 120 | 120 | Max.die set height | mm | 400 | 400 | 460 | 480 | 550 | 550 | 550 | 550 | 550 | Bottom size of slide | mm | 450x700 | 600x900 | 600x1000 | 650x1100 | 700x1200 | 750x1300 | 800x1300 | 800x1400 | 1200x1400 | Distance between uprights | mm | 750 | 1000 | 1140 | 1240 | 1340 | 1440 | 1440 | 1440 | 1800 | Left and right opening in uprights | mm | 500 | 630 | 650 | 800 | 900 | 900 | 1000 | 1000 | 1000 | Size of Table | mm | 500x750 | 630x1000 | 650x1100 | 800x1200 | 900x1300 | 900x1400 | 1000x1400 | 1000x1500 | 1300x1700 | Thickness of Table | mm | 90 | 150 | 180 | 200 | 200 | 200 | 220 | 220 | 220 | Size opening the table | mm | 120x500 | 160x600 | 160x600 | 160x600 | 160x600 | 160x600 | 160x600 | 160x600 | 160x600 | Hole for inch shank | mm | 50x60 | 60x80 | 70x80 | 70x80 | 70x80 | 70x80 | 70x80 | 70x100 | 70x100 | Main motor power | KW | 7.5 | 15 | 15 | 22 | 30 | 37 | 37 | 45 | 75 | Overall size | cm | 180x130x280 | 230x165x285 | 230x220x330 | 230x220x330 | 284x204x440 | 310x201x450 | 320x228x470 | 330x235x490 | 380x280x510 | Weight | ton | 7 | 12 | 16 | 20 | 23 | 34 | 40 | 51 | 66 | Old model | YS1-80 | YS1-125 | YS1-160 | YS1-200 | YS1-250 | YS1-315 | YS1-400 | YS1-500 | YS1-630 | - - - -

H-type Single Point power industrial mechanical cnc mini hydraulic press brake machine Main Structure Features: Steel plate welded framework structure machine body with four masts to ensure the high strength of the machine body Imported dry-type friction clutch, and wet-type clutch optional for JM31-160-400 Hydraulic overload protection device, imported pneumatic pump, imported sealing ring Steel plate welded slide block Four-corner eight-side precision long guideway Electrical die adjustment, digital display Raising-up balance cylinder, imported sealing ring Duplex electromagnetic valves imported from Japan Three interlinked pieces for air source imported from abroad PLC of international brand name Buttons, indicators, AC contactors, air switches and other control devices imported from abroad Inported electronic camshaft, intelligent top dead center stop function Inported transducer of international brand is optional, which can realize number of stroke adjustable Series JMD31 equipped with link structure, making it more fitting to superficial stretch process - - - - | 11311 | 11312 | 11313 | 11314 | 11315 | 11316 | Description | Specifications | Type | JM31-160 JMD31-160 | JM31-200 JMD31-200 | JM31-250 JMD31-250 | JM31-160 JMD31-160 | JM31-400 | JM31-500 | Nominal force | kN | 1600 | 2000 | 2500 | 3150 | 4000 | 5000 | Stroke under nominal force | mm | 6 | 6 | 8 | 8 | 10 | 10 | Slide block stroke | mm | 160 | 180 | 200 | 200 | 200 | 200 | Number of stroke | Fixed | min-1 | 40 | 35 | 30 | 30 | 25 | 20 | Variable (Optional) | mm | 35-50 | 30-40 | 25-35 | 25-30 | 20-30 | - | Max die set hight | mm | 350 | 450 | 500 | 550 | 600 | 650 | Die set height adjustment | mm | 110 | 110 | 120 | 120 | 120 | 120 | Worktable dimensions (F. B x L. R) | mm | 740 x 1050 | 760 x 1130 | 800 x 1200 | 850 x 1250 | 900 x 1350 | 1000 x 1500 | Thickness of bolster | mm | 150 | 160 | 170 | 170 | 180 | 190 | Dimension of side block bottom surface(F. B x L. R) | mm | 650 x 800 | 650 x 850 | 700 x 900 | 750 x 950 | 800 x 1050 | 900 x 1200 | Size of the handle hole (Diameter x Depth) | mm | 65 x 90 | 65 x 90 | 70 x 90 | 70 x 90 | 80 x 90 | 80 x 90 | Distance between columns of body | mm | 1150 | 1200 | 1320 | 1370 | 1550 | 1700 | Main motor power | kw | 15 | 18.5 | 22 | 30 | 37 | 45 | Outline dimension (F. B x L. R x H) | mm | 2530x1810x3500 | 2570x1810x3610 | 2950x2080x3850 | 3200x2200x4000 | 3530x2400x4210 | 3770x2580x4600 | Net weight | kg | 20000 | 24000 | 31000 | 36000 | 42000 | 52000 | - - - -

5000 KN H-type Single Point power industrial mechanical hydraulic cnc brake press machine Main Structure Features: Steel plate welded framework structure machine body with four masts to ensure the high strength of the machine body Imported dry-type friction clutch, and wet-type clutch optional for JM31-160-400 Hydraulic overload protection device, imported pneumatic pump, imported sealing ring Steel plate welded slide block Four-corner eight-side precision long guideway Electrical die adjustment, digital display Raising-up balance cylinder, imported sealing ring Duplex electromagnetic valves imported from Japan Three interlinked pieces for air source imported from abroad PLC of international brand name Buttons, indicators, AC contactors, air switches and other control devices imported from abroad Inported electronic camshaft, intelligent top dead center stop function Inported transducer of international brand is optional, which can realize number of stroke adjustable Series JMD31 equipped with link structure, making it more fitting to superficial stretch process - - - - | 11311 | 11312 | 11313 | 11314 | 11315 | 11316 | Description | Specifications | Type | JM31-160 JMD31-160 | JM31-200 JMD31-200 | JM31-250 JMD31-250 | JM31-160 JMD31-160 | JM31-400 | JM31-500 | Nominal force | kN | 1600 | 2000 | 2500 | 3150 | 4000 | 5000 | Stroke under nominal force | mm | 6 | 6 | 8 | 8 | 10 | 10 | Slide block stroke | mm | 160 | 180 | 200 | 200 | 200 | 200 | Number of stroke | Fixed | min-1 | 40 | 35 | 30 | 30 | 25 | 20 | Variable (Optional) | mm | 35-50 | 30-40 | 25-35 | 25-30 | 20-30 | - | Max die set hight | mm | 350 | 450 | 500 | 550 | 600 | 650 | Die set height adjustment | mm | 110 | 110 | 120 | 120 | 120 | 120 | Worktable dimensions (F. B x L. R) | mm | 740 x 1050 | 760 x 1130 | 800 x 1200 | 850 x 1250 | 900 x 1350 | 1000 x 1500 | Thickness of bolster | mm | 150 | 160 | 170 | 170 | 180 | 190 | Dimension of side block bottom surface(F. B x L. R) | mm | 650 x 800 | 650 x 850 | 700 x 900 | 750 x 950 | 800 x 1050 | 900 x 1200 | Size of the handle hole (Diameter x Depth) | mm | 65 x 90 | 65 x 90 | 70 x 90 | 70 x 90 | 80 x 90 | 80 x 90 | Distance between columns of body | mm | 1150 | 1200 | 1320 | 1370 | 1550 | 1700 | Main motor power | kw | 15 | 18.5 | 22 | 30 | 37 | 45 | Outline dimension (F. B x L. R x H) | mm | 2530x1810x3500 | 2570x1810x3610 | 2950x2080x3850 | 3200x2200x4000 | 3530x2400x4210 | 3770x2580x4600 | Net weight | kg | 20000 | 24000 | 31000 | 36000 | 42000 | 52000 | - - - -

100 ~ 520 S. P.M 600KN 60 ton automatic high speed CNC stamping press Air cushion machine automatic high speed stamping press capacity: 60 ton; motor power: 11 KW depth of throat: 230mm professional manufacturer I. Main structure features: l Widely used in stamping small precision components, such as precision electronics, communications, computer, household appliances, motor stator and so on. l C frame cast body, ageing treatment, high rigidity, stable precision l Liner rolling bearing guides of the slide with high accuracy; l Pneumatic friction clutch-brake with flexible movement and reliable performance l Crank shaft angle indicator, die height adjustment indicator l Imported PLC centralized control electric system, imported safety dual valve control air system l realize flexible move, single and continuous stamping, urgent stop and other operations safety and reliable; l Automatic oil lubrication system; l Optional photo-electronic safety device, feeder and other optional accessories are available for this power press subject to users demands. II. Standard configuration: l Pneumatic friction clutch-brake l Imported safety electromagnetic valve l Automatic oil lubrication system III. Optional: l Photo-electronic protect device l Un-coiler, leveler, feeder l Die set protector l Air cushion IV. Technical Specification: - - - - Item | unit | J21G-60 | Norminal Pressure | KN | 600 | Stroke | mm | 1.0 | | | Stroke of Slide | mm | 20 | 30 | 40 | Stroke | S.P.M | 100~520 | 100~500 | 100~450 | Max. Die Height | mm | 335 | 330 | 325 | Die Height Adjustment | mm | 50 | Depth of Troat | mm | 230 | Distance between Upright | mm | 260 | Size of Table | L-R | mm | 720 | F-B | mm | 450 | Thickness | mm | 120 | Hole of Table | L-R | mm | 250 | F-B | mm | 100 | Bottom Size of Slide | L-R | mm | 350 | F-B | mm | 320 | Dimension of Table hole | Diameter | mm | 50 | Depth | mm | 60 | Motor | KW | 11 | Overall Dimension | L-R | mm | 1805 | F-B | mm | 1364 | Height | mm | 2460 | Total Weight | KG | 7000 | - - - -

PLC Electrical control Power 250 ton crank punch press machine J21M-250 punch press: capacity: 250 ton throat depth:45mm size of table:1600(L)*880(W)mm 54 years' manufacture experience "Power Brand" 250 ton high performance crank punch press machine (J21M-250): I. Main Features and Function: A.Open type steel welded body with high rigidity, crankshaft is placed lenthways, nice appearance; B.Pneumatic dry friction clutch-brake with flexible movement and reliable performance; C.Six-side long guides of the slide with high moving precision; D. Shut type gear set with low noise; E.Hydraulic overload protector is intelligent and dependable, protect the safety of the press and tools; F. PLC Electrical control system; G.For machines over J21M-60, equipped with motorized die height adjustment. II. Standard configuration: A. Pneumatic dry friction clutch-brake B. Hydraulic overload protector C.Electromagnetic speed-adjustable motor D.Imported dual solenoid operated valve E. Automatic device adjust the height of die set F. Electronic cam control III. Optional: A. Output axle for connect feeder B. Frequency conversion or fixed speed motors C. Domestic dual solenoid operated valve D. Automatic strong oil lubrication system E. Photo-electronic safety device F. Feeder G. Air cushion IV. Technical data: - - - - Data | J21M-250 | Nominal Pressure(KN) | 2500 | Nominal Pressure Stroke(mm) | 6.0 | Stroke of Slide(mm) | 220 | Strokes (S.P.M) | 25~45 | Max. Die Set Height(mm) | 500 | Die Set Height Adjustment(mm) | 120 | Depth of Throat(mm) | 450 | Distance between uprights(mm) | 980 | Size of table | L-R(mm) | 1600 | F-B(mm) | 880 | Thickness(mm) | 190 | Hole of table | Diameter(mm) | 400 | Bottom size of Slide | L-R(mm) | 950 | F-B(mm) | 700 | Hole for punch shank | Diameter(mm) | 70 | Depth(mm) | 90 | Motor Power(kw) | 22 | Overall Size | L-R(mm) | 2640 | F-B(mm) | 1650 | Height | 3960 | Total Weight(kg) | 23540 | - - - -

high rigidity PLC centralized control power press machine with oil Lubrication system automatic power press: capacity:35 ton size of working table :600(L)*390(W)mm throat depth: 190mm professional manufacturer "Power Brand" high quality widely used automaticpower press machine (JB21G-35): I. Main structure features: l Widely used in stamping small precision components, such as precision electronic, communication tools, computer, household appliances, and motor stator and so on. l C frame cast body, ageing treatment, high rigidity, stable precision l The slider long guide ensures high guide accuracy; l Pneumatic friction clutch-brake with flexible movement and reliable performance l Crank shaft angle indicator, die height adjustment indicator l Imported PLC centralized control electric system, imported safety dual valve control air system realize flexible move, single and continuous stamping, urgent stop and other operations safety and reliable; l Automatic oil Lubrication system; l Optional photo-electronic safety device, feeder and other optional accessories are available for this power press subject to users demands. Standard configuration: l Pneumatic friction clutch-brake l Imported safety electromagnetic valve l Electric oil lubrication system Optional configuration: l Photo-electronic protect device l Uncoiler, leveler, feeder l Die set protector l Air cushion IV. Technical Specification: - - - - Item | unit | JB21G-35 | Norminal Pressure | kN | 350 | Stroke | mm | 1.6 | | | Stroke of Slide | mm | 20 | 30 | 40 | Stroke | S.P.M | 100~400 | 100~350 | 100~300 | Max. Die Hight | mm | 265 | 260 | 255 | Die Height Adjustment | mm | 50 | Depth of Troat | mm | 190 | Distance between Upright | mm | 270 | Size of Table | L-R | mm | 600 | F-B | mm | 390 | Thichness | mm | 100 | Hole of Table | L-R | mm | 250 | F-B | mm | 75 | Bottom Size of Slide | L-R | mm | 260 | F-B | mm | 230 | Dimension of Table hole | Diameter | mm | 50 | Depth | mm | 65 | Motor | KW | 5.5 | Overall Dimension | L-R | mm | 1275 | F-B | mm | 1105 | Height | mm | 2038 | Total Weight | KG | 3850 | - - - -

2120mm F-B 110 ton hydraulic Power metal single punch tablet press machine mechanical press: working capacity:110 ton motor power: 11KW strokes:35~65 S.P.M with 53years' manufacture experience Main Function & Features: lSteel welded C- frame body , ageing treatment, high rigidity, stable precision lCrankshaft placed in vertical, compact structure, good appearance lSix-side extra long rectangle guides of the slide, the surface of slide guides is bronze panel, in high moving precision and high abrasive resistance lClosed of gear drive, closed submerged lubricant, low noise and long service life lRed-tipped connecting rod structure separate wear thread and connecting rod body, reduce the cost of the parts. lDouble balanced cylinder balances the weight of slider component and upper die, eliminates gap among each part, reduces impact and noise lThe flexible connection of balanced cylinder and slider, ensuring the long service life of the cylinder. l Hydraulic overload protector protects the press and tools l Pneumatic dry friction clutch-brake with flexible movement and reliable performance l Imported PLC centralized control electric system, imported safety dual valve control air system realize flexible move, single and continuous stamping, urgent stop and other operations safety and reliable lOptional photo-electronic safety device, transmission output axle, feeder, air cushion and other optional accessories are available for this power press subject to users demands. Standard configuration: lPneumatic dry friction clutch-brake lHydraulic overload protector lConstant speed motor lImported safety electromagnetic valve lManual oil lubrication system lMotorized die height adjustment lElectronic cam control Optional configuration: lFeeding output shaft lelectromagnetic stepless speed regulation or frequency conversion system lSafety electromagnetic valve lPhoto-electronic safety device lFeeder lAir cushion lAutomatic oil lubrication system Technical Data: - - - - Items | Unit | J21M-110 | Nominal Pressure | KN | 1100 | Nominal Pressure Stroke | mm | 6.0 | Stroke of Slide | mm | 180 | Strokes | Fixed | S.P.M | 60 | Variable | S.P.M | 35~65 | | | | Die Height Adjustment | mm | 80 | Depth of Throat | mm | 350 | Distance between Uprights | mm | 710 | Size of Table | L-R | mm | 1150 | F-B | mm | 680 | Thickness | mm | 120 | Hole of Table | Diameter | mm | 200 | Bottom Size of Slide | L-R | mm | 900 | F-B | mm | 480 | Hole for Punch Shank | Diameter | mm | 50 | Depth | mm | 80 | | | | Overall dimension | F-B | mm | 2120 | L-R | mm | 1600 | Height | mm | 3100 | Weight | kg | 9580 | - - - -

automatic 45 Ton mechanical transfer Feeder Puching cutting power press machine (J72-45D) transfer press: capacity: 45 ton strokes:40-100 min-1 main motor:7.5KW 54 years' manufacture experience I. Main Features and Function: A. C-Frame Structure, ahead of the machine body is equiped with two drawer bar, which expanded operation space, improved its rigidity, enhanced the workpieces in high precission, improved dieslife. B. Using converter to adjust speed, makes the adjustment of speed accurate and reliable, expands its technical scope C. Using combined pneumatic friction clutch brake system, realized that the slider could stop at any position during working process. D. Driven by cam,the slider can transverse processing between top dead center and bottom dead center. E. Epuiped with integral die sets,each station die is installed in the die sets, the closed height of each die could be adjusted separately, and it is convenient for installation and adjustment. F. During each stataion, it is transimted by cam driver, the transimission is smooth and in high precision repositioning. G. Unique air line system provides overload protection function for machine. F. PLC electric control system is equiped with virous display instrument and test device. It can alarm and park automaticly when the machine runs improperly. II. Standard configuration: A. Combined pneumatic friction clutch brake system B. Transducer to adjust the speed C. Imported safety dual Electromagnetic valve D. Lubrication System E. abnormality automatic protection device III. Optional: A. Feeder B. Bottom knockout mechanism C. Puching cutting and blanking device of first station D. Station transimitting mechanism E. Crosswise processing device F. Blowing device G.Die sets H. Waste pick-up device I. Die cooling system J. Die safety detection IV. Technical data: - - - - Model Data Item | J72-25 | J72-45 | J72-45D | J72-65D | J72-65D1 | Norminal Pressure (kN) | 250 | 450 | 450 | 650 | 650 | Recommand Force(mm) | 16 | 300 | 300 | 450 | 450 | Standard stroke(mm) | 50 | 65 | 125 | 177.8 | 180 | Max. Stroke(mm) | 76 | 100 | - | | | Standard number of stroke(min -1) | 50~200 | 40~100 | 40~100 | 25~100 | 25~100 | Standard Die Height(mm) | 255 | 330 | 385 | 508 | 508 | Bottom Size of Slide(L-R*F-B)(mm) | 630*95 | 935*125 | 935*125 | 1300*165 | 1300*165 | Size of Table(L-R*F-B)(mm) | 876*202 | 1270*250 | 1270*250 | 1740*331 | 1740*331 | Number of Dies | 8 | 9 | 11 | 13 | 15 | 8 | 9 | 10 | 12 | 14 | 10 | 12 | 14 | 16 | Distance between die(mm) | 76 | 63.5 | 50 | 45 | 38 | 141 | 101.6 | 89 | 76 | 63.5 | 89 | 76 | 88.9 | 77 | Main Motor(KW) | 3.7 | 5.5 | 7.5 | 15 | 15 | - - - -

Automatic PLC 25 ~ 40 S.P.M power press single and continuous stamping machine power press machine: capacity: 315 ton srokes: 25~40S.P.M depth of throat: 120mm 53years' manufacture experience I. Main Features and Function: l Steel welded frame , ageing treatment, high rigidity, stable precision; l Crankshaft placed in vertical, compact structure, good appearance; l Six-side extra long rectangle guides of the slide, the surface of slide guides is bronze panel, in high moving precision and high abrasive resistance; l Closed of gear drive, closed submerged lubricant, low noise and long service life; l Red-tipped connecting rod structure separate wear thread and connecting rod body, reduce the cost of the parts. l Double balanced cylinder balances the weight of slider component and upper die, eliminates gap among each part, reduces impact and noise l The flexible connection of balanced cylinder and slider, ensuring the long service life of the cylinder. l Hydraulic overload protector protects the press and tools; l Pneumatic dry friction clutch-brake with flexible movement and reliable performance; l Imported PLC centralized control electric system, imported safety dual valve control air system realize flexible move, single and continuous stamping, urgent stop and other operations safety and reliable; l Optional photo-electronic safety device, transmission output axle, feeder, air cushion and other optional accessories are available for this power press subject to users demands. II. Standard configuration: l Pneumatic dry friction clutch-brake l Hydraulic overload protector l Constant speed motor l Imported safety electromagnetic valve l Manual oil lubrication system (model under J21M-200) l Automatic oil lubrication system (model up J21M-250) l Motorized die height adjustment( model up J21M-60) Electronic cam control (model up J21M-110) III. Optional configuration l Feeding output shaft l electromagnetic stepless speed regulation or frequency conversion system l Safety electromagnetic valve l Photo-electronic safety device l Feeder l Air cushion l Automatic oil lubrication system (model under J21M-200) IV. Technical data: - - - - Data | J21M-315 | Nominal Pressure(KN) | 3150 | Nominal Pressure Stroke(mm) | 7.0 | Stroke of Slide(mm) | 250 | Strokes (S.P.M) | 40 | Max. Die Set Height(mm) | 500 | Die Set Height Adjustment(mm) | 120 | Depth of Throat(mm) | 450 | Distance between uprights(mm) | 960 | Size of table | L-R(mm) | 1600 | F-B(mm) | 880 | Thickness(mm) | 190 | Hole of table | Diameter(mm) | 400 | Bottom size of Slide | L-R(mm) | 950 | F-B(mm) | 700 | Hole for hand shank | Diameter(mm) | 70 | Depth(mm) | 90 | Motor Power (KW) | 30 | Overall Size | L-R(mm) | 2750 | F-B(mm) | 1650 | Height | 4065 | Total Weight(kg) | 28800 | - - - -

Product parameters Quality / Safety Certification: ISO9001: 2000 Technical parameters Power 220V 50HZ Heating plate size 290 * 210mm Table size 400 * 320mm Maximum pressure 4000kg Down stroke 30mm Table travel 100mm Heating power 800W Feeding electric Temperature range room temperature -300 ° C Motor power 1500W Weight: 200kg Dimensions 800 * 700 * 1400mm Advantages 1. Electrical control, easy to operate; 2. Crankshaft design point wheel, slider drive, pressure is strong; 3. Table travel adjustable, convenient stamping workpieces of different heights; 4. Stamping pressure, temperature, speed adjustable; 5. Electromagnetic clutch brake control, stable and reliable; Product Description Applicable to a wide range of materials such as paper, leather, plastic, PVC, wood plane stamping, thermal transfer and die cutting, creasing, branded paste. Our machines can be customized according to your requirements.

9002200mm Max. Cardboard 14.5KW 380V 3phase 50HZ Automatic Folder Gluer Corrugated Cardboard Machine Description&Feature: QF-AFG series automatic folder gluer machine consists of three sections: vacuum feeding section, gluing and folding section, counter and stacker section. All motors except frequency conversion motor adopt Taiwan shengbond motor, Frequency conversion motor with quality inverter adjust speed. PLC and Touch screen control system for easy operation and running stable. The maximum speed is 130meters/min, average speed is 100meters/min. Energy conservation and high speed, saving labor cost. Main structure of machine: Feeding Section 1.Vacuum suction feeding to feed warping paperboard easily 2.Quality electromagnetic clutch and brake adpoted, feeding section controlled independently, operation easily 3.Stainless steel glue wheel adopted, long life and saving glue cost 4.Second creasing struction can impress again the paperboard which was not creased well Gluing and Folding Section 1.Simpless structure and high reliability, glue quantity adjustable, cleaning easily 2.Creaser wheel adjustable, suit for 2-8mm thick paperboard 3.Imported quality rubber belt adopted, automatic folding 4.With paperboard rectify device and creasing rectify device Counter and Stacker Section 1.Stacking and counting are simple and reliable 2.Digital control, operation easily and reliable. No-stop put in data and automatic counting 3.With rectification function 4.Paperboard counting and put out by pneumatic, stable and quickly Main Technical Specifications - - - - Model | QF-2400 | QF-2700 | Max. Cardboard(mm) | 9002200 | 12002500 | Min. Cardboard(mm) | 300900 | 300900 | Dimensions(mm) | L11000W3000H1600 | L12500W3400H1600 | Total weight | 6000Kg | 7000Kg | Power required | 11.5KW 380V 3phase 50HZ | 14.5 KW 380v 3phase 50HZ | Paperboard thickness | 3 or 5 layer paperboard | Control mode | PLC&TOUCH SCREEN | - - - -

PLC Touch Screen Control Automatic Rectification Folder Gluer Corrugated Carton Machines Description&Feature: QF-AFG series automatic folder gluer machine consists of three sections: vacuum feeding section, gluing and folding section, counter and stacker section. All motors except frequency conversion motor adopt Taiwan shengbond motor, Frequency conversion motor with quality inverter adjust speed. PLC and Touch screen control system for easy operation and running stable. The maximum speed is 130meters/min, average speed is 100meters/min. Energy conservation and high speed, saving labor cost. Main structure of machine: Feeding Section 1.Vacuum suction feeding to feed warping paperboard easily 2.Quality electromagnetic clutch and brake adpoted, feeding section controlled independently, operation easily 3.Stainless steel glue wheel adopted, long life and saving glue cost 4.Second creasing struction can impress again the paperboard which was not creased well Gluing and Folding Section 1.Simpless structure and high reliability, glue quantity adjustable, cleaning easily 2.Creaser wheel adjustable, suit for 2-8mm thick paperboard 3.Imported quality rubber belt adopted, automatic folding 4.With paperboard rectify device and creasing rectify device Counter and Stacker Section 1.Stacking and counting are simple and reliable 2.Digital control, operation easily and reliable. No-stop put in data and automatic counting 3.With rectification function 4.Paperboard counting and put out by pneumatic, stable and quickly Main Technical Specifications - - - - Model | QF-2400 | QF-2700 | Max. Cardboard(mm) | 9002200 | 12002500 | Min. Cardboard(mm) | 300900 | 300900 | Dimensions(mm) | L11000W3000H1600 | L12500W3400H1600 | Total weight | 6000Kg | 7000Kg | Power required | 11.5KW 380V 3phase 50HZ | 14.5 KW 380v 3phase 50HZ | Paperboard thickness | 3 or 5 layer paperboard | Control mode | PLC&TOUCH SCREEN | - - - -