+

Non - corrosion TP304 Stainless Steel Evaporator Tube for gas / liquid conveying, condensers Product applications: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery. Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world.

O.D6.0 - 25.4mm coiled stainless steel bundy Evaporator Tube, metal tube for condensser 1,O.D6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,bright anealing,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

Stainless steel evaporator pipe coil, Evaporator Tube for beverage cooling, gas / liquid converying 1,O.D 6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,clean inside,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

High intensity Corrosion resistance TP316L stainless steel condenser tubes, Evaporator Tube 1,O.D6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,bright anealing,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

Light weight high strength stainless steel Evaporator Tube for chiller, heaters, freezer 1,O.D6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,bright anealing,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

ERW ASTM, DIN 300 Series stainless steel Evaporator Tube for beverage cooling,gas / liquid converying 1,O.D6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,bright anealing,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

TP304L stainless steel evaporator pipe for beverage cooling with high frequency welded 1,O.D6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,bright anealing,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

Customizable 304, 304L Stainless Steel Evaporators tubes for cooling / heat exchanger,condenser 1,SUS304,316L 2,used for cooling,heat exchanger,condenser 3,without any leak, 4,spiral tube without any joints or connection Our company is specialized in producing stainless steel tubes. Stainless steel tubes for evaporators are manufactured to be used in cooling equipment, industrial equipment, liquid transportation etc. It can be in stead of copper tube, and it has morecompetitive price. They adopt healthy stainless steel materials 304, 304L and 316L, which are conform to FDA standard requestion.They have strong anti-corrosiveness and long term usage, and are assured of quality by 100% infiltration under the water.

Non - alloy TP304L stainless steel evaporator coils & pipes, mild steel pipe with high performance 1,O.D 6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,clean inside,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

10mm, 8mm bao steel tube ASTMA-254 hot dip galvanized steel pipe, Single Wall Steel Tube refrigeration tube used in refrigerator,freezer single wall bao steel strap,high frequency welded for condenser,evaporators hot dip galvanized steel pipe 1)material:bao steel tube,low carbon; 2)outer diameter:10mm,8mm,6.35m,6mm,4.76mm,4mm; 3)wall thickness:0.60mm,0.7mm,0.65mm,0.5mm; 4)we can supply the items according to customer's design; 5)packing as customer's request; 6)standard:ISO9001:2008, ISO14001:2004;ASTMA-254; 7)competitive price among the same area.

4.76mm,4mm diameter high frequency welded Single Wall Steel Tube for condenser, evaporators refrigeration tube used in refrigerator,freezer single wall bao steel strap,high frequency welded for condenser,evaporators ZN coated outside steel tube 1)material:bao steel tube,low carbon; 2)outer diameter:10mm,8mm,6.35m,6mm,4.76mm,4mm; 3)wall thickness:0.60mm,0.7mm,0.65mm,0.5mm; 4)we can supply the items according to customer's design; 5)packing as customer's request; 6)standard:ISO9001:2008, ISO14001:2004;ASTMA-254; 7)competitive price among the same area.

Low carbon copper coated two sides Single Wall Steel Tube for wire - tube condenser, evaporators copper coated two sides steel tube,bao steel strap,low carbon,used in refrigeration,freezer etc,ISO9001:2008, ISO14001:2004 copper coated two sides steel tube 1.material:bao steel strap,low carbon; 2.Main use: widely used in wire-tube condenser, evaporators, refrigeration, chiller, heaters, freezer,compressor,automobile etc 3.outer diameter:4.0mm,4.2mm,4.76mm,6.0mm,6.35mm,7.94mm,8.0mm etc 4.wall thickness: 0.5mm,0.6mm,0.65mm,0.7mm 5. standard: ASTMA-254 6.certification:also passed ISO9001 quality attestation system and ISO14001 Certificate of Enviroment Management System 7.surface treatment: copper coatedinside and outside 8. Features: high intensity, good plasticity and small resistance 9.tensile strength: more than 290 Mpa 10.yield strength:more than 180 Mpa 11.elongation:more than 20% 12. place of origin: changzhou city, jiangsu province, China. 13. port of loading:shanghai, China; 14. package:plastic cloth with coils, wooden boxes, iron pallets etc 15. brand:WUSHUN

0.5mm,0.6mm thickness Copper Coated low carbon Single Wall Steel Tube for chiller, heaters used in wire-tube condenser, evaporators, refrigeration, chiller, heaters, freezer etc low carbon steel tube 1.Materials:lowcarbonsteelstrip 2.Mainuse:widelyusedinwire-tubecondenser,evaporators,refrigeration,chiller,heaters,freezeretc 3.outerdiameter: 4mm,4.2mm,4.76mm,6mm,6.35mm,8mm 4.wallthickness: 0.5mm,0.6mm,0.65mm,0.7mm 5.standard:GB/T24187-2009 6.certification:alsopassedISO9001qualityattestationsystemandISO14001CertificateofEnvironment ManagementSystem 7.surfacetreatment:coppercoated 8.Features:softandeasytobend 9.tensilestrength:morethan290Mpa 10.yieldstrength:morethan180Mpa 11.elongation:morethan25% 12.placeoforigin:changzhoucity,jiangsuprovince,China. 13.portofloading:shanghai,China; 14.package:plasticclothwithcoils,woodenboxes,ironpalletsetc 15.delivery:ascontract 16.supplyability:30000tonperyear

High intensity 316L stainless steel Condenser Tubing for Evaporator, beverage machinery offer stainless steel tube for evaporator offer 304.304L and 316L evaporator tube 1,O.D6-25.4mm,Length,200-2500m 2, beverage cooling,gas/liquid 3,bright anealing,conform to FDA Evaporator Tube Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR Detailed Product Description Our company is specialized in producing stainless steel tubes. Stainless steel tubes for evaporators are manufactured to be used in cooling equipment, industrial equipment, liquid transportation etc. It can be in stead of copper tube, which has strong competition. They adopt healthy stainless steel materials 304, 304L and 316L, which are imported. They have strong corrosiveness and long term usage, and are assured of quality by 100% infiltration under the water.

TP304 stainless steel ASTM A269 6.0 - 25.4mm condenser coils & pipes & Tubes for beverage cooling 1,O.D 6.0-25.4mm, 2,used for beverage cooling,evaporator 3,clean inside,conform to FDA 4,produced as drawing or samples Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

TP316L stainless steel condenser coils & tubing, erw tubing for beer cooling, gas / liquid conveying 1,O.D 6.0-25.4mm, 2,used for beverage cooling,evaporator 3,clean inside/outsid,conform to FDA 4,produced as drawing or sample Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

O.D 6.0 - 25.4mm Condenser Tubes, bending metal pipe for beverage machinery 1,O.D 6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,clean inside,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

Corrosion resistance Condenser Tubes, stainless steel piping, structural steel tubes for beverage cooling 1,O.D 6.0-25.4mm, 2,used for beverage cooling,evaporator 3,clean inside/outsid,conform to FDA 4,produced as drawing or sample Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

High strength TP316L stainless steel Condenser Tubes for evaporator, refrigerating equipment 1,O.D 6.0-25.4mm, 2,used for beverage cooling,evaporator 3,clean inside/outsid,conform to FDA 4,produced as drawing or sample Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

6mm - 19mm Condenser Tubes, stainless rectangular tube with Enterprise Standard 1,O.D 6.0-25.4mm, 2,used for beverage cooling,evaporator 3,clean inside,conform to FDA 4,produced as drawing or samples Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

Corrosion resistance evaporators, gas / liquid conveying TP316L stainless steel Condenser Tubes 1,O.D 6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,clean inside,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

High performance seamless single wall condenser coils & tubing for beer cooler 1,O.D 6.0-25.4mm, 2,used for beverage cooling,evaporator 3,clean inside/outsid,conform to FDA 4,produced as drawing or sample Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

Non - corrosion 7mm, 8mm evaporator coils tube, Condenser Tubes for liquid converying, evaporator 1,O.D 6.0-25.4mm,Length,200-2500m 2,used for beverage cooling,gas/liquid converying,evaporator 3,clean inside,conform to FDA Features: 1) Production Standard :ASTM A269;Enterprise Standard 2) Material of commonly used stainless steel:TP304, TP316L; Material of other stainless steel: TP304L 3) Product applications and applicable field: refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery 4)General product status at delivery: semi-hard status/bright annealing soft status 5) Specification range:outer diameter:6mm-19mm; 6) Annual production capacity: 600 tons Note: We aslo have had a history of producing stainless steel tube in coil for well over a dozen years and we have two lines for the production of continuous weldingpipes. On the basis of complete equipment and leading technology, the company has aslo introduced world first-class brigt annealing technology, whichmakes it possible to conduct stainless steel pipe online softening treatment. Besides, we aslo have testing & inspecting facilities for flattening, tube end expansion, cold benging as well as for hardness, tensile and 100% airtightness tests. With reliable quality ang reasonable prices, 80% of our coil pipe products are exported to countries all over the world. Coil Pipe Technical Parameters Set By The Manufacturer: 1) Stainless Steel Pipe Measurement Range:outer diameter: 6-19mm; wall thickness: 0.41-1.5mm; the measurement tolerance as per ASTM A269 2) The outer diameter of the coil pipe>500mm; the inner diameter of the coil pipe<1000mm 3) The height of the coil pipe:200mm-400mm 4) Max.length of each coil:<1000M min.length of each coil:>6m 5) General delivery length:200m-800m 6) Physical properties of bright-annealed coil pipe:A. ratio of elongation no less than 55% B. surface hardness no greater 170HV C. tensile strength no less than 550N/MM2 D. yield strength no less than 220N/MM2 E. bending angke>1800; mon.bending radius<1.5*pipe diameter 7) Physical properties of general coil pipe (without bright annealing):A. ratio of elongation no less than 35% B. surface hardness greater than 180HV C. tensile strength>600N/MM2 D. yield strength>280N/MM2 E.bending angle>900; bending radius>2*pipe diameter 8) Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR

Polishing 304, 304L, 316L stainless steel condenser coil tube for Instruments, apparatuses stainless steel condenser coil tube Main grades:304,304L,316L Outside diameter:6mm-19mm Wall thickness:0.3mm-1.5mm stainless steel condenser coil tube Main grades:304,304L,316L Outside diameter:6mm-19mm Wall thickness:0.3mm-1.5mm height:200mm-400mm length/coil:2000m General delivery length::200m-800m Physical properties of bright-annealed coil pipe: 1)ratio of elongation no less than 55%; 2) surface hardness no greater 170HV 3) tensile strength no less than 550N/MM2 4) yield strength no less than 220N/MM2 5) bending angke>1800; mon.bending radius<1.5*pipe diameter Physical properties of general coil pipe (without bright annealing): 1) ratio of elongation no less than 35%; 2)surface hardness greater than 180HV; 3)tensile strength>600N/MM2 ; 4) yield strength>280N/MM2 5)bending angle>900; bending radius>2*pipe diameter Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR Special performance:Accord with USA FDA food standard,Inside and outside surface smooth and neat. Application:refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery, Solar energy,Marine oil, Instruments and apparatuses. Standard:ASTM A269,ASTM A249 el stainless steel materials, whose surface has gone through polishing treatment. They are applicable to all kinds of household products, such as hangs, kitchen products and cloth hangs.

Welded ASTM A269 condenser cooling tube for Solar energy, Marine oil, industry condenser cooling tube offer super long stainless steel pipe in coil with compititive price and high quanlity condenser cooling tube Main grades:304,304L,316L Outside diameter:6mm-19mm Wall thickness:0.3mm-1.5mm height:200mm-400mm length/coil:2000m General delivery length::200m-800m Physical properties of bright-annealed coil pipe: 1)ratio of elongation no less than 55%; 2) surface hardness no greater 170HV 3) tensile strength no less than 550N/MM2 4) yield strength no less than 220N/MM2 5) bending angke>1800; mon.bending radius<1.5*pipe diameter Physical properties of general coil pipe (without bright annealing): 1) ratio of elongation no less than 35%; 2)surface hardness greater than 180HV; 3)tensile strength>600N/MM2 ; 4) yield strength>280N/MM2 5)bending angle>900; bending radius>2*pipe diameter Pressure resistance property:take 8*0.5*c coil pipe as an example, the work pressure to be borne by the inner wall is no less than 60BAR Special performance:Accord with USA FDA food standard,Inside and outside surface smooth and neat. Application:refrigerating equipment, evaporators, gas/liquid conveying, condensers, beverage machinery, Solar energy,Marine oil, Instruments and apparatuses. Standard:ASTM A269,ASTM A249

Refrigeration copper tube, Copper pipes for plumbing system, wire - tube condenser, evaporators Copper tubes,Copper pipes,Used in air conditioning refrigeration system and plumbing system Supply Air conditioning straight copper tube & Pancake coils & LWC Plain tube & Copper capillary tube and Insulated copper tube Properties of the product as per domestic and international standards ASTM B88/B280/B68/B75/EN12735/JIS H3300/ GBT 17791

4.76mm, 6.35mm, 7.96mm Single Wall Coating bundy tube with yellow zinc with high plasticity bundy tube / brake tube/Coating bundy tube Size; 4.76,6.35,7.96,9.52,12.7 TK :0.7mm PK:Roll/Pancake Doulbe wall/Single Wall Specifications: 1. Main use: widely used in evaporators, refrigerators, automobiles and heaters 2. Features: high intensity, good plasticity, and small resistance 3. Standard: ASTMA254-94 4. Materials: materials can be altered according to customers' requirements 5. Size: 4.7*0.7mm, 6.35*0.7mm, 6. Type: Zinc coating outer side, Cu coating outer side, Cu coating both sides 7. Packing: packed with iron pallet bundy tube /brake tube/ Coating bundy tube Plating:Copper, White&Yellow Zinc, Olive Green and PVF Size:4.76, 6.35, 8, 9.5*0.7 mm,etc. ISO9001 TS16949 The low carbon steel brake tube is supplied in single wall and double wall(Bundy Pipe). The products conform to ASTM A-254-91, A-512-91A and ASTM A214 and A513 in material and quality. Commonly sizes we supply to the client include 4.76mm0.7 mm,6.35 mm0.7 mm and 8 mm0.7 mm. Plating:Yellow Zinc,White Zinc,Copper and PVE. Package:in coils/cut-to-length Application:Hydraulic brake line tubing, brake tubing, brake pipes, fuel lines, transmission oil cooler lines, air conditioning tube, power steering, condenser, compressor, evaporator etc. Standard ASTM A254 OD:4mm,4.76mm 6mm 6.35mm.7.94mm,8mm,12.76 WT:0.4-1.0MM

Doulbe wall / Single wall small resistance 9.52mm,12.7mm color bundy tube for refrigerators, automobiles color bundy tube / brake tube/Coating bundy tube Size; 4.76,6.35,7.96,9.52,12.7 TK :0.7mm PK:Roll/Pancake Doulbe wall/Single Specifications: 1. Main use: widely used in evaporators, refrigerators, automobiles and heaters 2. Features: high intensity, good plasticity, and small resistance 3. Standard: ASTMA254-94 4. Materials: materials can be altered according to customers' requirements 5. Size: 4.7*0.7mm, 6.35*0.7mm, 6. Type: Zinc coating outer side, Cu coating outer side, Cu coating both sides 7. Packing: packed with iron pallet bundy tube /brake tube/ Coating bundy tube / PVF tube / color bundy tube Plating:Copper, White&Yellow Zinc, Olive Green and PVF Size:4.76, 6.35, 8, 9.5*0.7 mm,etc. ISO9001 TS16949 The low carbon steel brake tube is supplied in single wall and double wall(Bundy Pipe). The products conform to ASTM A-254-91, A-512-91A and ASTM A214 and A513 in material and quality. Commonly sizes we supply to the client include 4.76mm0.7 mm,6.35 mm0.7 mm and 8 mm0.7 mm. Plating:Yellow Zinc,White Zinc,Copper and PVE. Package:in coils/cut-to-length Application:Hydraulic brake line tubing, brake tubing, brake pipes, fuel lines, transmission oil cooler lines, air conditioning tube, power steering, condenser, compressor, evaporator etc. Standard ASTM A254 OD:4mm,4.76mm 6mm 6.35mm.7.94mm,8mm,12.76 WT:0.4-1.0MM

RoSH, CE E - coat customized Low carbon Steel wire bundy tube evaporator with high intensity Steel wire and bundy tube evaporator 1.Low carbon 2.Corrosion-resistant 3.Delivery fast 4.RoSH,CE Steel wire and bundy tube evaporator Specification: - - - - Rawmaterial | 1)Rollingweldedsteelpipe:80.71,withwallthickness0.7 2)lowcarbonsteelwire1.0~1.6 3)Bracket:Steelplate(SPCC)thickness:0.60.9 | Structure | Structure1:evaporatorforsingletemperaturecontrolsystem(Single-capillaryevaporator) Structure2:evaporatorfordoubletemperaturecontrolsystem(Double-capillary evaporator) Structure3:evaporatorforthreewaytemperaturecontrolsystem(Three-capillary evaporator) | Keyprocess | Tubebending,Welding,Monoshelfassemble,Assemblywelding,Leakagetest,Cleaning, Coating,Inspection,Packing | Technicalstandards | Wirepitch:5,canproduceaccordingtothedrawingorsamplesuppliedbyclients, alsocanhelptheclientsdesignandproducedifferentevaporators. | Performance | 1Surfacetreatedwithelectrophoresisorpowderpaintingtopreventthecorrosion 2InnercleannesscanmeettherequirementsofR134a&CFCcoolingsystem. 3Cansatisfythecoolingcapabilityrequirements. | Capacity | 3.0millionsetsperyear(9000setsperday). | - - - - - - - - R134aCoolingSystemTubeInsideStandards | - - - - Linearmeasure | 0.004L | Verticality | 0.047B2 | Residualmoisture | 5/100cm3 | Residualimpurity | 10/100cm3 | Residualmineraloil | 100/100cm3 | Residualchlorine | 5vloppm | Residualparaffin | 3/ | - - - - | SpecificationofE-coating | - - - -

Flexible durable customizable Refrigeration Tube for air condition, evaporators 1.Bundy Tube Refrigerator Condenser,bundy tube condenser,refrigerator part 2.very high quality 3.Chinese supplier 1.wire tube condenser,bundy tube condenser,freezer condenser,refrigerator condensor,deep freezer condener,,wire on tube condenser,bundy tube refrigerator condenser 2.details are as follows: 1) Material: a) Bundy tube (steel tube coated with copper): 4.76 x 0.7mm, 6 x 0.7mm, 6.35 x 0.7mm, 8 x 0.7mm b) Steel wire: 1----1.6mm (both sides can be with steel plates and brackets; can be upon your choice) 2) Structure: bundy tubes welded with steel wires 3) Painting:Cathode electrophoretic painting(black) 3.We can supply the items according to customers' drawings or samples. 4.Packing:With plastic caps at both ends,In standard carton, each piece separated by packing paper

8 x 0.71mm Refrigeration Tube, Refrigeration Heating Tubes for evaporators, refrigerator we can supply you many kinds of evaporator,wire tube evaporator,refrigerator evaporator, evaporator,wire tube evaporator,refrigerator evaporator, We can supply the wire tube evaporators the details as follows:Wire tube evaporators for refrigerators1) Material: a) Bundy tube: 4.76x0.71m,6x0.71mm,6.35x0.71mm,8 x 0.71mm b) Steel wire: 1.4-1.6mm2) Structure: bendy tubes welded with steel plates3) Painting: a) Anode electrophoretic painting (black)b) Cathode electrophoretic painting is also available with higher priceWe can supply the items according to customers' drawings or samplesIf you are interested in it pls do not hesitate to contace us we will give you a reply immediately

74*235*226 Aluminium Auto Air Conditioner Evaporator for KIA SPORTAGE 95-97 OEM 0K01A61J1X Air-cooled 74*235*226 Auto A/C Parallel Flow Aluminium Evaporator for KIA SPORTAGE 95-97 OEM 0K01A61J1X - - - - Application: | KIA SPORTAGE 95-97 | Type: | Negotiable | Core Size: | 74*235*226 | OEM NO: | 0K01A61J1X | Reference NO: | UAC: EV5525PF | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:KIA We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.

Air-cooled Auto AC / Air Conditioner Evaporator for PEUGEOT 306 / 505 00- OEM 6450.R4 Air-cooled Auto A/C Parallel Flow Aluminium Evaporator for PEUGEOT 306/505 00- OEM 6450.R4 - - - - Application: | PEUGEOT 306/505 00- | Type: | Negotiable | Core Size: | | OEM NO: | 6450.R4 6450.CH | Reference NO: | UAC: EV939502PF | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:PEUGEOT-CITROEN We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.

Air-cooled 73*235*195 Auto A/C Parallel Flow Aluminium Evaporator for GMC CANYON 04-08 OEM 15-63413 - - - - Application: | GMC CANYON 04-08 | Type: | Negotiable | Core Size: | 73*235*195 | OEM NO: | 15-63413 | Reference NO: | UAC: EV939612PFC | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:GMC We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.

Air-cooled 73*340*178 Auto A/C Parallel Flow Aluminium Evaporator for OLDSMOBILE FIRENZA 99-03 OEM 3053166 - - - - Application: | OLDSMOBILE FIRENZA 99-03 | Type: | Negotiable | Core Size: | 73*340*178 | OEM NO: | 3053166 3053940 | Reference NO: | UAC: EV6388 | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:OLDSMOBILE We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.

Air-cooled 73*340*178 Auto A/C Parallel Flow Aluminium Evaporator for PONTIAC SUNBIRD 86-00 OEM 3053940 - - - - Application: | PONTIAC SUNBIRD 86-00 | Type: | Negotiable | Core Size: | 73*340*178 | OEM NO: | 3053940 | Reference NO: | UAC: EV6388 4 SEASONS: 54516 | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:PONTIAC We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.

- - - - Application: | HUYNDAI ELANTRA 01-04 | Type: | Negotiable | Core Size: | 60*235*247 | OEM NO: | 97139-2D000 | Reference NO: | UAC: EV939589PF | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:HUYNDAI We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.

Air-cooled 74*235*248 Auto A/C Parallel Flow Aluminium Evaporator for HYUNDA TUCSON 05 OEM 971392E200 - - - - Application: | HYUNDA TUCSON 05 | Type: | Negotiable | Core Size: | 74*235*248 | OEM NO: | 971392E200 971392E210 971402E200 | Reference NO: | UAC: EV939679PFC | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:HUYNDAI We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.

Air-cooled 200*142*65 Auto A/C Parallel Flow Aluminium Evaporator for BMW 7 SERIES 03-04 OEM 64106907744 - - - - Application: | BMW 7 SERIES 03-04 | Type: | Negotiable | Core Size: | 200*142*65 | OEM NO: | 64106907744 | Reference NO: | UAC: EV939724PFC | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:BMW We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.

Air-cooled 89*239*267 Auto A/C Parallel Flow Aluminium Evaporator for CHRYSLER CONCORDE 98-02 OEM 5011079AC - - - - Application: | CHRYSLER CONCORDE 98-02 | Type: | Negotiable | Core Size: | 89*239*267 | OEM NO: | 5011079AC 4882864AC | Reference NO: | UAC: EV8007PF 4 SEASONS: 54571 | Structure: | Parallel Flow | Cold style: | Air-cooled | Body Material: | Aluminium | - - - - Applications: Application:CHRYLSER We can supply 1500 kinds of AUTO A/C evaporators and condensers with high quality and full scope. Pls contact us if there are any items you like or send us the picture&drawings with detail dimensions. Specifications: OEM Factory auto condensor 1)Perfect cooling effect 2)Power functionaastable quality 3)general air conditioner Competitive Advantage: We have many advanced equipments. 1. For different dimension of fins, we use different equipments to making. Some factories use an equipment to make different dimension of fins. They cant keep the products dimension exactly. Our factory can make sure every fins dimension is exact and improve the products quality. Many types of equipment are controlled by computer to keep the quality of products is good. We will test the first product .If it is fine, equipments will continue to work, or we will check the equipments. 2. Before we pack products, we will test them. And we have many types of test equipment. A good product should pass water test, helium mass spectrometer test, shake test corrosion test, cleanliness test, 100% pressure test and burst test.Those equipments keep the quality of products. 3. We have many excellent technicists. We can develop new products as you require. In the factory, our workers need to attend the train before they woke. Technicists will teach them how to read drawing and control the equipment. 4. We also have a team to fix and take care of equipment. We have more than 2000 kinds of evaporator coil and condenser. If you have any questions and requirement, Please contact us.