 |
air tank
|
Introduction of air cannon
Puyang Hongyu Pressure Vessel Co., Ltd
Tel: 0086-393-8939290 Fax: 0086-393-6303408
Mobile:86-18939328290 Email: sales@aircannonbiz.com
Air Storage Tank plays an important role in the industrial enterprises, such as industrial mining, petroleum, chemistry, pharmacy, textile, construction, furnace, etc. Air storage tank has the function of air compression and air source pressure stabilization. Air pressure tank can eliminate or reduce the periodical air flow pulsation of the air compressor, stabilize the pressure in pipe, supply power to pipeline to finish the pneumatic program operation after machine halt. Meanwhile, the air storage tank can compress air, dewater, defecate, etc.
The air receiver tank is designed according to the GMP standard with advanced process technology and automatic control system. The vertical type and the horizontal type are available. The body of compressed air tank is double skin. The inner skin is polished to Ra0.45, and the outer skin uses mirror coil as the material which makes the air pressure vessel look beautiful from the outside. The typical structure of compressed air storage tank is: vapor can be supplied in jacket which covered with insulation material; Manhole, water inlet, return nozzle, antisepsis mouth, spray ball and 0.45um air respirator at the topside; Compressed air receiver tank is also equipped with a control box with a complete function of indication and inspection of distilled water temperature, constant temperature control, liquid level digital display as well as the alarm function at the upper lower limit.
|
| |
 |
Sandblast coupling
|
Sandblast coupling- Fuqing Ruicheng Hardware
Types: Hose end
Nozzle holder
Adapter
Sizes available: 3/4'' 1'' 1-1/4'' 1-1/2''
Material: Aluminum,brass,cast iron , nylon
ENGATE RAPIDO PARA ABRASIVO
We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc.
|
| |
 |
Tungsten Carbide Coil Winding Nozzle Guide / Wire Guide Needles
|
1.Material:Tungsten Carbide
2.Application:Nittoku winding machine
3.Tungsten carbide wire guide nozzles
4.wire guide needles
Tungsten Carbide Coil Winding Nozzle Guide / Wire Guide Needles
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
High Wear Resistance Ruby Wire Guide With Ra0.1 Roughness
|
1.Material: Rubyinwireoutlet , Ceramicinwireinlet , Stainlesssteelbody
2.Application: CNCautomaticwindingmachine
3.rubynozzleforNittokuwindingmachine
4.rubytipcoilwindingnozzle
High Wear Resistance Ruby Wire Guide With Ra0.1 Roughness
- - - -
PlaceofOrigin: | DongGuanChina |
BrandName: | KIMCHEN |
Material: | Rubyinwireoutlet |
Ceramicinwireinlet |
Stainlesssteelbody |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
Suitableforuse: | wirewindingoffinecoilandthincoil |
- - - -
Detailed Product Description:
Ruby Nozzle is made of two main parts, stainless steel and the processed ruby. It has been widely used in CNC automatic winding machine.
The Ruby Material has the characteristics of extremely hard and wear-resistant by precise processing and combination. The rigidity of ruby is above than level 9 and is just less than that of diamond. Ruby nozzle guide is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling term continual work.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right
Application:
Wire coiling of fine coil and thin coil of various automatic winding machines.
Work Limit: d1>0.2mm D1>0.7mm
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0326-2-1006 | 26 | 6 | 2 | 1.0 | 0.3 | 0.6 | N/A |
2 | RC0326-2-0806 | 26 | 6 | 2 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0330-2-0807 | 30 | 7 | 2 | 0.8 | 0.3 | 0.4 | N/A |
4 | RC0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.4 | N/A |
5 | RC0535-2-1008 | 35 | 8 | 2 | 1.0 | 0.5 | 0.5 | N/A |
6 | RC0535-2.5-1411 | 35 | 11 | 2.5 | 1.4 | 0.5 | 0.8 | N/A |
7 | RC0336-2.5-1011 | 36 | 11 | 2.5 | 1.0 | 0.3 | 0.6 | N/A |
8 | RR0635-2-1610 | 35 | 10 | 2 | 1.6 | 0.6 | 0.8 | N/A |
9 | RS0535-2.5-1210 | 35 | 10 | 2.5 | 1.2 | 0.5 | 0.8 | N/A |
10 | RC0530-2-1208 | 30 | 8 | 2 | 1.2 | 0.5 | 0.6 | N/A |
10 | RS0830-2 | 30 | N/A | 2 | 2 | 0.8 | 0.8 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.8 | N/A |
2 | RC0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0430-3-1210 | 30 | 10 | 3 | 1.2 | 0.4 | 0.6 | N/A |
4 | RC0530-3-1311 | 30 | 11 | 3 | 1.3 | 0.5 | 0.8 | N/A |
5 | RC0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.8 | N/A |
6 | RC0323-3-1007P | 23 | 7 | 3 | 1.0 | 0.3 | 0.8 | 16 |
7 | RC0511-3-1506P | 11 | 6 | 3 | 1.5 | 0.5 | 0.6 | 5 |
8 | RC0514-3-1509P | 14 | 9 | 3 | 1.5 | 0.5 | 0.6 | 5 |
9 | RC0311-3-1006P | 11 | 6 | 3 | 1.0 | 0.3 | 0.6 | 5 |
10 | RC0314-3-1009P | 14 | 9 | 3 | 1.0 | 0.3 | 0.6 | 5 |
11 | RC0530-3-1455 | 30 | 5.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
12 | RC0530-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
13 | RC0330-3-1535P | 30 | 3.5 | 3 | 1.5 | 0.3 | 0.5 | 13 |
14 | RC0330-3-1012 | 30 | 12 | 3 | 1.0 | 0.3 | 0.6 | N/A |
15 | RS0821-3-2015P | 21 | 15 | 3 | 2.0 | 0.8 | 1.0 | 6 |
16 | RC0615-3-1505 | 15 | 5 | 3 | 1.5 | 0.6 | 0.6 | N/A |
17 | RC0530-3-2014 | 30 | 14 | 3 | 2.0 | 0.5 | 0.5 | N/A |
18 | RC0426-3-1208 | 26 | 8 | 3 | 1.2 | 0.4 | 0.6 | N/A |
19 | RC0317-3-0812 | 17 | 12 | 3 | 0.8 | 0.3 | 0.4 | N/A |
20 | RC0414-3-1309 | 14 | 9 | 3 | 1.3 | 0.4 | 0.6 | N/A |
21 | RC0314-3-1015 | 14 | 1.5 | 3 | 1.0 | 0.3 | 0.6 | N/A |
22 | RR0314-3-1003 | 14 | 3 | 3 | 1.0 | 0.3 | 0.5 | N/A |
23 | RC03186-3-0805 | 18.6 | 5 | 3 | 0.8 | 0.3 | 0.4 | N/A |
24 | RC0334-3-1035P | 34 | 3.5 | 3 | 1.0 | 0.3 | 0.6 | 8 |
25 | RC1030-3-2514 | 30 | 14 | 3 | 2.5 | 1.0 | 1.2 | N/A |
26 | RS0522-3-1608P | 22 | 8 | 3 | 1.6 | 0.5 | 0.8 | 14 |
27 | RC0422-3-1208P | 22 | 8 | 3 | 1.2 | 0.4 | 0.6 | 14 |
28 | RS1030-3-20145 | 30 | 14.5 | 3 | 2.0 | 1.0 | 1.2 | N/A |
29 | RS08115-3-2006P | 11.5 | 6 | 3 | 2.0 | 0.8 | 1.1 | 5 |
30 | RS15115-3P | 11.5 | N/A | 3 | N/A | 1.5 | 2.0 | 5.5 |
31 | RR08115-3-2055P | 11.5 | 5.5 | 3 | 2.0 | 0.8 | 0.8 | 6 |
32 | RR08145-3-2085P | 14.5 | 8.5 | 3 | 2 | 0.8 | 0.8 | 6 |
33 | RR10105-3 | 10.5 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
34 | RR1014-3 | 14 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
35 | RC1030-3-2013 | 30 | 13 | 3 | 2.0 | 1.0 | 1.0 | N/A |
36 | RC0825-3-2520 | 25 | 20 | 3 | 2.5 | 0.8 | 1.0 | N/A |
37 | RC0829-3-2015 | 29 | 15 | 3 | 2 | 0.8 | 1.2 | N/A |
38 | RS0626-3-1420 | 26 | 20 | 3 | 1.4 | 0.6 | 0.8 | N/A |
39 | RS0625-3-2520 | 25 | 20 | 3 | 2.5 | 0.6 | 0.8 | N/A |
40 | RC0430-3-1065 | 30 | 6.5 | 3 | 1.0 | 0.4 | 0.6 | N/A |
41 | RC0630-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.6 | 0.8 | N/A |
42 | RC0545-3-1315 | 45 | 15 | 3 | 1.3 | 0.5 | 0.6 | N/A |
43 | RC0530-3-1006 | 30 | 6 | 3 | 1.0 | 0.5 | 0.8 | N/A |
44 | RC0630-3-1406 | 30 | 6 | 3 | 1.4 | 1.2 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 0.8 | 20 |
2 | RS0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 1.0 | 20 |
3 | RC0330-4-1515 | 30 | 15 | 4 | 1.5 | 0.3 | 0.6 | N/A |
4 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.5 | N/A |
5 | RC0340-4-1006 | 40 | 6 | 4 | 1.0 | 0.3 | 0.6 | N/A |
6 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.6 | N/A |
7 | RC1043-4-2514P | 43 | 14 | 4 | 2.5 | 1.0 | 1.2 | 20 |
8 | RS1230-4-2515 | 30 | 15 | 4 | 2.5 | 1.2 | 1.5 | N/A |
9 | RC0343-4-1006 | 43 | 6 | 4 | 1.0 | 0.3 | 0.6 | 19 |
10 | RS08285-4-2015 | 28.5 | 15 | 4 | 2.0 | 0.8 | 1.2 | N/A |
11 | RS0643-4-1515 | 43 | 15 | 4 | 1.5 | 0.6 | 1.0 | 20 |
- - - -
|
| |
 |
High Wear Resistance Tungsten Carbide Coil Winding Nozzle W0435-2-1010
|
1.Material:Tungsten Carbide
2.Application:Nittoku winding machine
3.Tungsten carbide wire guide nozzles
4.wire guide needles
High Wear Resistance Tungsten Carbide Coil Winding Nozzle W0435-2-1010
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Ra0.025 Tungsten Carbide Nozzle For Protect Enameled-Wire W0535-2-1210
|
1.Material:Tungsten Carbide
2.Application:CNC automatic winding machine
3.Wire Guide Coil Winding Nozzles
4.Tungsten Carbide Coil Winding Nozzle
Ra0.025 Tungsten Carbide Nozzle For Protect Enameled-Wire W0535-2-1210
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Ruby Nozzle Guide With Precision Grinding , Ra0.025 Roughness
|
# # rubynozzleguide
# coilwindingnozzle
# rubytipcoilwindingnozzle
# wireguidenozzle
Ruby Nozzle Guide With Precision Grinding , Ra0.025 Roughness
- - - -
PlaceofOrigin: | DongGuanChina |
BrandName: | KIMCHEN |
Material: | Rubyinwireoutlet |
Ceramicinwireinlet |
Stainlesssteelbody |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
Suitableforuse: | wirewindingoffinecoilandthincoil |
- - - -
Detailed Product Description:
Ruby Nozzle is made of two main parts, stainless steel and the processed ruby. It has been widely used in CNC automatic winding machine.
The Ruby Material has the characteristics of extremely hard and wear-resistant by precise processing and combination. The rigidity of ruby is above than level 9 and is just less than that of diamond. Ruby nozzle guide is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling term continual work.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing. 2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit. 3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm. 4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right
Application:
Wire coiling of fine coil and thin coil of various automatic winding machines.
Work Limit: d1>0.2mm D1>0.7mm
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0326-2-1006 | 26 | 6 | 2 | 1.0 | 0.3 | 0.6 | N/A |
2 | RC0326-2-0806 | 26 | 6 | 2 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0330-2-0807 | 30 | 7 | 2 | 0.8 | 0.3 | 0.4 | N/A |
4 | RC0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.4 | N/A |
5 | RC0535-2-1008 | 35 | 8 | 2 | 1.0 | 0.5 | 0.5 | N/A |
6 | RC0535-2.5-1411 | 35 | 11 | 2.5 | 1.4 | 0.5 | 0.8 | N/A |
7 | RC0336-2.5-1011 | 36 | 11 | 2.5 | 1.0 | 0.3 | 0.6 | N/A |
8 | RR0635-2-1610 | 35 | 10 | 2 | 1.6 | 0.6 | 0.8 | N/A |
9 | RS0535-2.5-1210 | 35 | 10 | 2.5 | 1.2 | 0.5 | 0.8 | N/A |
10 | RC0530-2-1208 | 30 | 8 | 2 | 1.2 | 0.5 | 0.6 | N/A |
10 | RS0830-2 | 30 | N/A | 2 | 2 | 0.8 | 0.8 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.8 | N/A |
2 | RC0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0430-3-1210 | 30 | 10 | 3 | 1.2 | 0.4 | 0.6 | N/A |
4 | RC0530-3-1311 | 30 | 11 | 3 | 1.3 | 0.5 | 0.8 | N/A |
5 | RC0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.8 | N/A |
6 | RC0323-3-1007P | 23 | 7 | 3 | 1.0 | 0.3 | 0.8 | 16 |
7 | RC0511-3-1506P | 11 | 6 | 3 | 1.5 | 0.5 | 0.6 | 5 |
8 | RC0514-3-1509P | 14 | 9 | 3 | 1.5 | 0.5 | 0.6 | 5 |
9 | RC0311-3-1006P | 11 | 6 | 3 | 1.0 | 0.3 | 0.6 | 5 |
10 | RC0314-3-1009P | 14 | 9 | 3 | 1.0 | 0.3 | 0.6 | 5 |
11 | RC0530-3-1455 | 30 | 5.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
12 | RC0530-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
13 | RC0330-3-1535P | 30 | 3.5 | 3 | 1.5 | 0.3 | 0.5 | 13 |
14 | RC0330-3-1012 | 30 | 12 | 3 | 1.0 | 0.3 | 0.6 | N/A |
15 | RS0821-3-2015P | 21 | 15 | 3 | 2.0 | 0.8 | 1.0 | 6 |
16 | RC0615-3-1505 | 15 | 5 | 3 | 1.5 | 0.6 | 0.6 | N/A |
17 | RC0530-3-2014 | 30 | 14 | 3 | 2.0 | 0.5 | 0.5 | N/A |
18 | RC0426-3-1208 | 26 | 8 | 3 | 1.2 | 0.4 | 0.6 | N/A |
19 | RC0317-3-0812 | 17 | 12 | 3 | 0.8 | 0.3 | 0.4 | N/A |
20 | RC0414-3-1309 | 14 | 9 | 3 | 1.3 | 0.4 | 0.6 | N/A |
21 | RC0314-3-1015 | 14 | 1.5 | 3 | 1.0 | 0.3 | 0.6 | N/A |
22 | RR0314-3-1003 | 14 | 3 | 3 | 1.0 | 0.3 | 0.5 | N/A |
23 | RC03186-3-0805 | 18.6 | 5 | 3 | 0.8 | 0.3 | 0.4 | N/A |
24 | RC0334-3-1035P | 34 | 3.5 | 3 | 1.0 | 0.3 | 0.6 | 8 |
25 | RC1030-3-2514 | 30 | 14 | 3 | 2.5 | 1.0 | 1.2 | N/A |
26 | RS0522-3-1608P | 22 | 8 | 3 | 1.6 | 0.5 | 0.8 | 14 |
27 | RC0422-3-1208P | 22 | 8 | 3 | 1.2 | 0.4 | 0.6 | 14 |
28 | RS1030-3-20145 | 30 | 14.5 | 3 | 2.0 | 1.0 | 1.2 | N/A |
29 | RS08115-3-2006P | 11.5 | 6 | 3 | 2.0 | 0.8 | 1.1 | 5 |
30 | RS15115-3P | 11.5 | N/A | 3 | N/A | 1.5 | 2.0 | 5.5 |
31 | RR08115-3-2055P | 11.5 | 5.5 | 3 | 2.0 | 0.8 | 0.8 | 6 |
32 | RR08145-3-2085P | 14.5 | 8.5 | 3 | 2 | 0.8 | 0.8 | 6 |
33 | RR10105-3 | 10.5 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
34 | RR1014-3 | 14 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
35 | RC1030-3-2013 | 30 | 13 | 3 | 2.0 | 1.0 | 1.0 | N/A |
36 | RC0825-3-2520 | 25 | 20 | 3 | 2.5 | 0.8 | 1.0 | N/A |
37 | RC0829-3-2015 | 29 | 15 | 3 | 2 | 0.8 | 1.2 | N/A |
38 | RS0626-3-1420 | 26 | 20 | 3 | 1.4 | 0.6 | 0.8 | N/A |
39 | RS0625-3-2520 | 25 | 20 | 3 | 2.5 | 0.6 | 0.8 | N/A |
40 | RC0430-3-1065 | 30 | 6.5 | 3 | 1.0 | 0.4 | 0.6 | N/A |
41 | RC0630-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.6 | 0.8 | N/A |
42 | RC0545-3-1315 | 45 | 15 | 3 | 1.3 | 0.5 | 0.6 | N/A |
43 | RC0530-3-1006 | 30 | 6 | 3 | 1.0 | 0.5 | 0.8 | N/A |
44 | RC0630-3-1406 | 30 | 6 | 3 | 1.4 | 1.2 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 0.8 | 20 |
2 | RS0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 1.0 | 20 |
3 | RC0330-4-1515 | 30 | 15 | 4 | 1.5 | 0.3 | 0.6 | N/A |
4 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.5 | N/A |
5 | RC0340-4-1006 | 40 | 6 | 4 | 1.0 | 0.3 | 0.6 | N/A |
6 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.6 | N/A |
7 | RC1043-4-2514P | 43 | 14 | 4 | 2.5 | 1.0 | 1.2 | 20 |
8 | RS1230-4-2515 | 30 | 15 | 4 | 2.5 | 1.2 | 1.5 | N/A |
9 | RC0343-4-1006 | 43 | 6 | 4 | 1.0 | 0.3 | 0.6 | 19 |
10 | RS08285-4-2015 | 28.5 | 15 | 4 | 2.0 | 0.8 | 1.2 | N/A |
11 | RS0643-4-1515 | 43 | 15 | 4 | 1.5 | 0.6 | 1.0 | 20 |
- - - -
|
| |
 |
Coil Winding Nozzles Guide With Ra0.1 Roughness of Bore
|
1.Material:Tungsten Carbide
2.Application:CNC automatic winding machine
3.wire guide tubes
4.wire guide needles
Coil Winding Nozzles Guide With Ra0.1 Roughness of Bore
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Ruby Nozzle , Coil Winding Nozzle For Nittoku Winding Machine RC0330-3-1007
|
# # rubynozzleguide
# rubynozzleforcoilwindingmachine
# rubynozzleforNittokuwindingmachine
# rubywireguide
Ruby Nozzle , Coil Winding Nozzle For Nittoku Winding Machine RC0330-3-1007
- - - -
PlaceofOrigin: | DongGuanChina |
BrandName: | KIMCHEN |
Material: | Rubyinwireoutlet |
Ceramicinwireinlet |
Stainlesssteelbody |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
Suitableforuse: | wirewindingoffinecoilandthincoil |
- - - -
Detailed Product Description:
Ruby Nozzle is made of two main parts, stainless steel and the processed ruby. It has been widely used in CNC automatic winding machine.
The Ruby Material has the characteristics of extremely hard and wear-resistant by precise processing and combination. The rigidity of ruby is above than level 9 and is just less than that of diamond. Ruby nozzle guide is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling term continual work.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing. 2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit. 3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm. 4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right
Application:
Wire coiling of fine coil and thin coil of various automatic winding machines.
Work Limit: d1>0.2mm D1>0.7mm
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0326-2-1006 | 26 | 6 | 2 | 1.0 | 0.3 | 0.6 | N/A |
2 | RC0326-2-0806 | 26 | 6 | 2 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0330-2-0807 | 30 | 7 | 2 | 0.8 | 0.3 | 0.4 | N/A |
4 | RC0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.4 | N/A |
5 | RC0535-2-1008 | 35 | 8 | 2 | 1.0 | 0.5 | 0.5 | N/A |
6 | RC0535-2.5-1411 | 35 | 11 | 2.5 | 1.4 | 0.5 | 0.8 | N/A |
7 | RC0336-2.5-1011 | 36 | 11 | 2.5 | 1.0 | 0.3 | 0.6 | N/A |
8 | RR0635-2-1610 | 35 | 10 | 2 | 1.6 | 0.6 | 0.8 | N/A |
9 | RS0535-2.5-1210 | 35 | 10 | 2.5 | 1.2 | 0.5 | 0.8 | N/A |
10 | RC0530-2-1208 | 30 | 8 | 2 | 1.2 | 0.5 | 0.6 | N/A |
10 | RS0830-2 | 30 | N/A | 2 | 2 | 0.8 | 0.8 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.8 | N/A |
2 | RC0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0430-3-1210 | 30 | 10 | 3 | 1.2 | 0.4 | 0.6 | N/A |
4 | RC0530-3-1311 | 30 | 11 | 3 | 1.3 | 0.5 | 0.8 | N/A |
5 | RC0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.8 | N/A |
6 | RC0323-3-1007P | 23 | 7 | 3 | 1.0 | 0.3 | 0.8 | 16 |
7 | RC0511-3-1506P | 11 | 6 | 3 | 1.5 | 0.5 | 0.6 | 5 |
8 | RC0514-3-1509P | 14 | 9 | 3 | 1.5 | 0.5 | 0.6 | 5 |
9 | RC0311-3-1006P | 11 | 6 | 3 | 1.0 | 0.3 | 0.6 | 5 |
10 | RC0314-3-1009P | 14 | 9 | 3 | 1.0 | 0.3 | 0.6 | 5 |
11 | RC0530-3-1455 | 30 | 5.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
12 | RC0530-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
13 | RC0330-3-1535P | 30 | 3.5 | 3 | 1.5 | 0.3 | 0.5 | 13 |
14 | RC0330-3-1012 | 30 | 12 | 3 | 1.0 | 0.3 | 0.6 | N/A |
15 | RS0821-3-2015P | 21 | 15 | 3 | 2.0 | 0.8 | 1.0 | 6 |
16 | RC0615-3-1505 | 15 | 5 | 3 | 1.5 | 0.6 | 0.6 | N/A |
17 | RC0530-3-2014 | 30 | 14 | 3 | 2.0 | 0.5 | 0.5 | N/A |
18 | RC0426-3-1208 | 26 | 8 | 3 | 1.2 | 0.4 | 0.6 | N/A |
19 | RC0317-3-0812 | 17 | 12 | 3 | 0.8 | 0.3 | 0.4 | N/A |
20 | RC0414-3-1309 | 14 | 9 | 3 | 1.3 | 0.4 | 0.6 | N/A |
21 | RC0314-3-1015 | 14 | 1.5 | 3 | 1.0 | 0.3 | 0.6 | N/A |
22 | RR0314-3-1003 | 14 | 3 | 3 | 1.0 | 0.3 | 0.5 | N/A |
23 | RC03186-3-0805 | 18.6 | 5 | 3 | 0.8 | 0.3 | 0.4 | N/A |
24 | RC0334-3-1035P | 34 | 3.5 | 3 | 1.0 | 0.3 | 0.6 | 8 |
25 | RC1030-3-2514 | 30 | 14 | 3 | 2.5 | 1.0 | 1.2 | N/A |
26 | RS0522-3-1608P | 22 | 8 | 3 | 1.6 | 0.5 | 0.8 | 14 |
27 | RC0422-3-1208P | 22 | 8 | 3 | 1.2 | 0.4 | 0.6 | 14 |
28 | RS1030-3-20145 | 30 | 14.5 | 3 | 2.0 | 1.0 | 1.2 | N/A |
29 | RS08115-3-2006P | 11.5 | 6 | 3 | 2.0 | 0.8 | 1.1 | 5 |
30 | RS15115-3P | 11.5 | N/A | 3 | N/A | 1.5 | 2.0 | 5.5 |
31 | RR08115-3-2055P | 11.5 | 5.5 | 3 | 2.0 | 0.8 | 0.8 | 6 |
32 | RR08145-3-2085P | 14.5 | 8.5 | 3 | 2 | 0.8 | 0.8 | 6 |
33 | RR10105-3 | 10.5 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
34 | RR1014-3 | 14 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
35 | RC1030-3-2013 | 30 | 13 | 3 | 2.0 | 1.0 | 1.0 | N/A |
36 | RC0825-3-2520 | 25 | 20 | 3 | 2.5 | 0.8 | 1.0 | N/A |
37 | RC0829-3-2015 | 29 | 15 | 3 | 2 | 0.8 | 1.2 | N/A |
38 | RS0626-3-1420 | 26 | 20 | 3 | 1.4 | 0.6 | 0.8 | N/A |
39 | RS0625-3-2520 | 25 | 20 | 3 | 2.5 | 0.6 | 0.8 | N/A |
40 | RC0430-3-1065 | 30 | 6.5 | 3 | 1.0 | 0.4 | 0.6 | N/A |
41 | RC0630-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.6 | 0.8 | N/A |
42 | RC0545-3-1315 | 45 | 15 | 3 | 1.3 | 0.5 | 0.6 | N/A |
43 | RC0530-3-1006 | 30 | 6 | 3 | 1.0 | 0.5 | 0.8 | N/A |
44 | RC0630-3-1406 | 30 | 6 | 3 | 1.4 | 1.2 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 0.8 | 20 |
2 | RS0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 1.0 | 20 |
3 | RC0330-4-1515 | 30 | 15 | 4 | 1.5 | 0.3 | 0.6 | N/A |
4 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.5 | N/A |
5 | RC0340-4-1006 | 40 | 6 | 4 | 1.0 | 0.3 | 0.6 | N/A |
6 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.6 | N/A |
7 | RC1043-4-2514P | 43 | 14 | 4 | 2.5 | 1.0 | 1.2 | 20 |
8 | RS1230-4-2515 | 30 | 15 | 4 | 2.5 | 1.2 | 1.5 | N/A |
9 | RC0343-4-1006 | 43 | 6 | 4 | 1.0 | 0.3 | 0.6 | 19 |
10 | RS08285-4-2015 | 28.5 | 15 | 4 | 2.0 | 0.8 | 1.2 | N/A |
11 | RS0643-4-1515 | 43 | 15 | 4 | 1.5 | 0.6 | 1.0 | 20 |
- - - -
|
| |
 |
Tungsten Carbide Coil Winding Nozzle For CNC Winding Machine
|
1.Material:TungstenCarbide
2.Application:CNCautomaticwindingmachine
3.wire guide tubes
4.wire guide needles
Tungsten Carbide Coil Winding Nozzle For CNC Winding Machine
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Tungsten Carbide Wire Guide Nozzle For Protect Enameled - Wire
|
1.Material:Tungsten Carbide
2.Application:TANAC winding machine
3.coil winding nozzle
4.tungsten carbide tube
Tungsten Carbide Wire Guide Nozzle For Protect Enameled - Wire
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Tungsten Carbide Coil Winding Nozzle With Ra0.1 W0635-2-1510
|
1.Material:Tungsten Carbide
2.Application:Nittoku winding machine
3.Tungsten carbide wire guide nozzles
4.wire guide needles
Tungsten Carbide Coil Winding Nozzle With Ra0.1 W0635-2-1510
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Tungsten Carbide Nozzle Guide , Coil Winding Nozzle W0335-2-0810
|
1.Material:TungstenCarbide
2.Application:CNCautomaticwindingmachine
3.wire guide tubes
4.wire guide needles
Tungsten Carbide Nozzle Guide , Coil Winding Nozzle W0335-2-0810
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Wire Guide Tubes With 2300N/mm Anti-bending W0435-2-1007
|
1.Material:Tungsten Carbide
2.Application:coil winding machine
3.wire guide tubes
4.wire guide nozzle
Wire Guide Tubes With 2300N/mm Anti-bending W0435-2-1007
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Tungsten Carbide Coil Winding Nozzle Guide W0430-2-1085 , W0735-2.5-1811
|
1.Material:Tungsten Carbide
2.Application:Nittoku winding machine
3.Tungsten carbide wire guide nozzles
4.wire guide needles
Tungsten Carbide Coil Winding Nozzle Guide W0430-2-1085 , W0735-2.5-1811
- - - -
Material: | TungstenCarbide |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
Anti-bending: | 2300N/mm |
Hardness: | ReachedoverHR90degree |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
- - - -
Detailed Product Description:
Tungsten carbidenozzle also call wire guide tubes or wire guide needles.
Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm. We do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specifications:
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0435-2-1010 | 35 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
2 | W0535-2-1210 | 35 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
3 | W0435-2-1207 | 35 | 7 | 2 | 1.2 | 0.4 | 0.4 | N/A |
4 | W0635-2-1210 | 35 | 10 | 2 | 1.2 | 0.6 | 0.6 | N/A |
5 | W0435-2-1007 | 35 | 7 | 2 | 1.0 | 0.4 | 0.4 | N/A |
6 | W0530-2-1210 | 30 | 10 | 2 | 1.2 | 0.5 | 0.5 | N/A |
7 | W0330-2-0808 | 30 | 8 | 2 | 0.8 | 0.3 | 0.3 | N/A |
8 | W0330-2-0607 | 30 | 7 | 2 | 0.6 | 0.3 | 0.3 | N/A |
9 | W0435-2-1508 | 35 | 8 | 2 | 1.5 | 0.4 | 0.4 | N/A |
10 | W0635-2-1510 | 35 | 10 | 2 | 1.5 | 0.6 | 0.6 | N/A |
11 | W0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.3 | N/A |
12 | W0326-2-1007 | 26 | 7 | 2 | 1.0 | 0.3 | 0.3 | N/A |
13 | W0430-2-1010 | 30 | 10 | 2 | 1.0 | 0.4 | 0.4 | N/A |
14 | W0530-2-1010 | 30 | 10 | 2 | 1.0 | 0.5 | 0.5 | N/A |
15 | W0430-2-1085 | 30 | 8.5 | 2 | 1.0 | 0.4 | 0.4 | N/A |
16 | W0735-2.5-1811 | 35 | 11 | 2.5 | 1.8 | 0.7 | 0.7 | N/A |
17 | W0835-2.5-2011 | 35 | 11 | 2.5 | 2.0 | 0.8 | 0.8 | N/A |
18 | W0330-2-1006 | 30 | 6 | 2.0 | 1.0 | 0.3 | 0.3 | N/A |
19 | W0635-2-1215 | 35 | 15 | 2.0 | 1.2 | 0.6 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.3 | N/A |
2 | W0430-3-1007 | 30 | 7 | 3 | 1.0 | 0.4 | 0.4 | N/A |
3 | W0530-3-1010 | 30 | 10 | 3 | 1.0 | 0.5 | 0.5 | N/A |
4 | W0630-3-1007 | 30 | 7 | 3 | 1.0 | 0.6 | 0.6 | N/A |
5 | W0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.3 | N/A |
6 | W0630-3-1211 | 30 | 11 | 3 | 1.2 | 0.6 | 0.6 | N/A |
7 | W0630-3-1309 | 30 | 9 | 3 | 1.3 | 0.6 | 0.6 | N/A |
8 | W0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.6 | N/A |
9 | W0611-3-1506P | 11 | 6 | 3 | 1.5 | 0.6 | 0.6 | 5 |
10 | W0614-3-1509P | 14 | 9 | 3 | 1.5 | 0.6 | 0.6 | 5 |
11 | W0814-3-1509P | 14 | 9 | 3 | 1.5 | 0.8 | 0.8 | 5 |
12 | W1014-3-1509P | 14 | 9 | 3 | 1.5 | 1.0 | 1.0 | 5 |
13 | W0414-3-1009P | 14 | 9 | 3 | 1.0 | 0.4 | 0.4 | 5 |
14 | W1030-3 | 30 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
15 | W0326-3-0808 | 26 | 8 | 3 | 0.8 | 0.3 | 0.3 | N/A |
16 | W0330-3-0810 | 30 | 10 | 3 | 0.8 | 0.3 | 0.3 | N/A |
17 | W0330-3-0607 | 30 | 7 | 3 | 0.6 | 0.3 | 0.3 | N/A |
18 | W03265-3-0811P | 26.5 | 11 | 3 | 0.8 | 0.3 | 0.3 | 15 |
19 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
20 | W1030-3-2014 | 30 | 14 | 3 | 2.0 | 1.0 | 1.0 | N/A |
21 | W1230-3-2514 | 30 | 14 | 3 | 2.5 | 1.2 | 1.2 | N/A |
22 | W0330-3-0707 | 30 | 7 | 3 | 0.7 | 0.3 | 0.3 | N/A |
23 | W0330-3-0502 | 30 | 2 | 3 | 0.5 | 0.3 | 0.3 | N/A |
24 | W0626-3-1208 | 26 | 8 | 3 | 1.2 | 0.6 | 0.6 | N/A |
25 | W0530-3-1210 | 30 | 10 | 3 | 1.2 | 0.5 | 0.5 | N/A |
26 | W0330-3-0504 | 30 | 4 | 3 | 0.5 | 0.3 | 0.3 | N/A |
27 | W0825-3 | 25 | N/A | 3 | N/A | 0.8 | 0.8 | N/A |
28 | W0435-1211 | 35 | 11 | 3 | 1.2 | 0.4 | 0.4 | N/A |
29 | W03535-3-0811 | 35 | 11 | 3 | 0.8 | 0.35 | 0.35 | N/A |
30 | W0735-3-1411 | 35 | 11 | 3 | 1.4 | 0.7 | 0.7 | N/A |
31 | W0430-3-0808 | 30 | 8 | 3 | 0.8 | 0.4 | 0.4 | N/A |
32 | W1025-3-1608 | 25 | 8 | 3 | 1.6 | 1.0 | 1.0 | N/A |
33 | W0845-3-2017 | 45 | 17 | 3 | 2 | 0.8 | 0.8 | N/A |
34 | W1535-3 | 35 | N/A | 3 | N/A | 1.5 | 1.5 | N/A |
35 | W0535-3-1211 | 35 | 11 | 3 | 1.2 | 0.5 | 0.5 | N/A |
36 | W1036-3-2016 | 36 | 16 | 3 | 2.0 | 1.0 | 1.0 | N/A |
37 | W0630-3-1212 | 30 | 12 | 3 | 1.2 | 0.6 | 0.6 | N/A |
38 | W1022-3-2010 | 22 | 10 | 3 | 2.0 | 1.0 | 1.0 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | W0830-4-2015 | 30 | 15 | 4 | 2.0 | 0.8 | 0.8 | N/A |
2 | W1243-4-2515 | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | N/A |
3 | W1243-4-2515P | 43 | 15 | 4 | 2.5 | 1.2 | 1.2 | 20 |
4 | W0843-4-2015P | 43 | 15 | 4 | 2.0 | 0.8 | 0.8 | 20 |
5 | W1232-4.5 | 32 | N/A | 4.5 | N/A | 1.2 | 1.2 | N/A |
6 | W1543-4-2512P | 43 | 12 | 4 | 2.5 | 1.5 | 1.5 | 20 |
7 | W0843-3.9-2019P | 43 | 19 | 3.9 | 2.0 | 0.8 | 0.8 | 19 |
8 | W2020-5 | 20 | N/A | 5 | N/A | 2.0 | 2.0 | N/A |
- - - -
Application:Appliedforwirecoilwindingofvariousmotors
WorkLimit:d1=d2>0.10mm
D1>0.30mm
|
| |
 |
Ra0.025 Ruby Tipped Coil Winding Nozzle RC0535-2.5-1411
|
1.Material: Rubyinwireoutlet , Ceramicinwireinlet , Stainlesssteelbody
2.Application: CNCautomaticwindingmachine
3.rubynozzleforNittokuwindingmachine
4.rubytipcoilwindingnozzle
Ra0.025 Ruby Tipped Coil Winding Nozzle RC0535-2.5-1411
- - - -
PlaceofOrigin: | DongGuanChina |
BrandName: | KIMCHEN |
Material: | Rubyinwireoutlet |
Ceramicinwireinlet |
Stainlesssteelbody |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
Suitableforuse: | wirewindingoffinecoilandthincoil |
- - - -
Detailed Product Description:
Ruby Nozzle is made of two main parts, stainless steel and the processed ruby. It has been widely used in CNC automatic winding machine.
The Ruby Material has the characteristics of extremely hard and wear-resistant by precise processing and combination. The rigidity of ruby is above than level 9 and is just less than that of diamond. Ruby nozzle guide is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling term continual work.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right
Application:
Wire coiling of fine coil and thin coil of various automatic winding machines.
Work Limit: d1>0.2mm D1>0.7mm
- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0326-2-1006 | 26 | 6 | 2 | 1.0 | 0.3 | 0.6 | N/A |
2 | RC0326-2-0806 | 26 | 6 | 2 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0330-2-0807 | 30 | 7 | 2 | 0.8 | 0.3 | 0.4 | N/A |
4 | RC0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.4 | N/A |
5 | RC0535-2-1008 | 35 | 8 | 2 | 1.0 | 0.5 | 0.5 | N/A |
6 | RC0535-2.5-1411 | 35 | 11 | 2.5 | 1.4 | 0.5 | 0.8 | N/A |
7 | RC0336-2.5-1011 | 36 | 11 | 2.5 | 1.0 | 0.3 | 0.6 | N/A |
8 | RR0635-2-1610 | 35 | 10 | 2 | 1.6 | 0.6 | 0.8 | N/A |
9 | RS0535-2.5-1210 | 35 | 10 | 2.5 | 1.2 | 0.5 | 0.8 | N/A |
10 | RC0530-2-1208 | 30 | 8 | 2 | 1.2 | 0.5 | 0.6 | N/A |
10 | RS0830-2 | 30 | N/A | 2 | 2 | 0.8 | 0.8 | N/A |
- - - -
- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.8 | N/A |
2 | RC0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0430-3-1210 | 30 | 10 | 3 | 1.2 | 0.4 | 0.6 | N/A |
4 | RC0530-3-1311 | 30 | 11 | 3 | 1.3 | 0.5 | 0.8 | N/A |
5 | RC0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.8 | N/A |
6 | RC0323-3-1007P | 23 | 7 | 3 | 1.0 | 0.3 | 0.8 | 16 |
7 | RC0511-3-1506P | 11 | 6 | 3 | 1.5 | 0.5 | 0.6 | 5 |
8 | RC0514-3-1509P | 14 | 9 | 3 | 1.5 | 0.5 | 0.6 | 5 |
9 | RC0311-3-1006P | 11 | 6 | 3 | 1.0 | 0.3 | 0.6 | 5 |
10 | RC0314-3-1009P | 14 | 9 | 3 | 1.0 | 0.3 | 0.6 | 5 |
11 | RC0530-3-1455 | 30 | 5.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
12 | RC0530-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
13 | RC0330-3-1535P | 30 | 3.5 | 3 | 1.5 | 0.3 | 0.5 | 13 |
14 | RC0330-3-1012 | 30 | 12 | 3 | 1.0 | 0.3 | 0.6 | N/A |
15 | RS0821-3-2015P | 21 | 15 | 3 | 2.0 | 0.8 | 1.0 | 6 |
16 | RC0615-3-1505 | 15 | 5 | 3 | 1.5 | 0.6 | 0.6 | N/A |
17 | RC0530-3-2014 | 30 | 14 | 3 | 2.0 | 0.5 | 0.5 | N/A |
18 | RC0426-3-1208 | 26 | 8 | 3 | 1.2 | 0.4 | 0.6 | N/A |
19 | RC0317-3-0812 | 17 | 12 | 3 | 0.8 | 0.3 | 0.4 | N/A |
20 | RC0414-3-1309 | 14 | 9 | 3 | 1.3 | 0.4 | 0.6 | N/A |
21 | RC0314-3-1015 | 14 | 1.5 | 3 | 1.0 | 0.3 | 0.6 | N/A |
22 | RR0314-3-1003 | 14 | 3 | 3 | 1.0 | 0.3 | 0.5 | N/A |
23 | RC03186-3-0805 | 18.6 | 5 | 3 | 0.8 | 0.3 | 0.4 | N/A |
24 | RC0334-3-1035P | 34 | 3.5 | 3 | 1.0 | 0.3 | 0.6 | 8 |
25 | RC1030-3-2514 | 30 | 14 | 3 | 2.5 | 1.0 | 1.2 | N/A |
26 | RS0522-3-1608P | 22 | 8 | 3 | 1.6 | 0.5 | 0.8 | 14 |
27 | RC0422-3-1208P | 22 | 8 | 3 | 1.2 | 0.4 | 0.6 | 14 |
28 | RS1030-3-20145 | 30 | 14.5 | 3 | 2.0 | 1.0 | 1.2 | N/A |
29 | RS08115-3-2006P | 11.5 | 6 | 3 | 2.0 | 0.8 | 1.1 | 5 |
30 | RS15115-3P | 11.5 | N/A | 3 | N/A | 1.5 | 2.0 | 5.5 |
31 | RR08115-3-2055P | 11.5 | 5.5 | 3 | 2.0 | 0.8 | 0.8 | 6 |
32 | RR08145-3-2085P | 14.5 | 8.5 | 3 | 2 | 0.8 | 0.8 | 6 |
33 | RR10105-3 | 10.5 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
34 | RR1014-3 | 14 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
35 | RC1030-3-2013 | 30 | 13 | 3 | 2.0 | 1.0 | 1.0 | N/A |
36 | RC0825-3-2520 | 25 | 20 | 3 | 2.5 | 0.8 | 1.0 | N/A |
37 | RC0829-3-2015 | 29 | 15 | 3 | 2 | 0.8 | 1.2 | N/A |
38 | RS0626-3-1420 | 26 | 20 | 3 | 1.4 | 0.6 | 0.8 | N/A |
39 | RS0625-3-2520 | 25 | 20 | 3 | 2.5 | 0.6 | 0.8 | N/A |
40 | RC0430-3-1065 | 30 | 6.5 | 3 | 1.0 | 0.4 | 0.6 | N/A |
41 | RC0630-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.6 | 0.8 | N/A |
42 | RC0545-3-1315 | 45 | 15 | 3 | 1.3 | 0.5 | 0.6 | N/A |
43 | RC0530-3-1006 | 30 | 6 | 3 | 1.0 | 0.5 | 0.8 | N/A |
44 | RC0630-3-1406 | 30 | 6 | 3 | 1.4 | 1.2 | 0.6 | N/A |
- - - -
- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 0.8 | 20 |
2 | RS0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 1.0 | 20 |
3 | RC0330-4-1515 | 30 | 15 | 4 | 1.5 | 0.3 | 0.6 | N/A |
4 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.5 | N/A |
5 | RC0340-4-1006 | 40 | 6 | 4 | 1.0 | 0.3 | 0.6 | N/A |
6 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.6 | N/A |
7 | RC1043-4-2514P | 43 | 14 | 4 | 2.5 | 1.0 | 1.2 | 20 |
8 | RS1230-4-2515 | 30 | 15 | 4 | 2.5 | 1.2 | 1.5 | N/A |
9 | RC0343-4-1006 | 43 | 6 | 4 | 1.0 | 0.3 | 0.6 | 19 |
10 | RS08285-4-2015 | 28.5 | 15 | 4 | 2.0 | 0.8 | 1.2 | N/A |
11 | RS0643-4-1515 | 43 | 15 | 4 | 1.5 | 0.6 | 1.0 | 20 |
- - - -
|
| |
 |
closed circuit suction blast machine
|
closed circuite suction blast machine At competitve prices from China.
Vacuum closed circuit suction blast machine ERB-X consists of suction blast machine with remote control, blast hose, blast head assembly, reclaimer & separator and vacuum pump generated abrasive recovery system, dust collector and cart. It is widely used for descaling, surface texturing, and paint preparation, mainly used to clean rust removing at oil field, container renew, etc, and pneumatically generated abrasive recovery system makes it to be used without dust and disposal problem.
Features:
1. Automatically recover and recycle the abrasive without stopping to refill, reduce the abrasive consumption, eliminate sweeping and minimize abrasive disposal costs.
2. Pneumatically generated abrasive recovery system for easy loading new or reusable abrasive media, and easy recovery expendable abrasive media for disposal. Spent abrasive dust and debris is recovered continuously and reusable abrasive is recycled to the gun.
3. Adopt suction blast system allow the operator to start and stop blasting as frequently as needed.
4. Closed circuit blast gun fitted with boron carbide nozzle dia 6.4mm, 7.9mm, 9.5mm, 11.1mm to customers require.
5. Integral dust collector houses cartridge filter to trap dust and fines for acceptable dust emission.
6. It can be used as a normal portable suction sand blasting machine only or a vacuum recovery only.
7. Available with 4 standard different brush, flat brush, cylindrical brush, interior angle brush, exterior angle brush.
Model: ERB-X
Operating pressure 0.3-0.7MPa
Vacuum 16.67kPa
Power consumption: Compressed air amd eectricity
Sand storage hopper: 80L approc.
Blasting hose: 5 meter max
Processing capacity: 2-3m2/h.
|
| |
 |
closed circuite suction blast machine air powered only
|
closed circuite suction blast machine consists of suction blast machine with remote control, blast hose, blast head assembly, reclaimer and pneumaticlly generated abrasive recovery system, dust collector and
cart. it is widely used for descaling, surface texturing, and paint preparation, mainly used to clean rust removing at oil field, container renew, etc, and pneumaticlly generated abrasive recovery system makes it to be used without dust and disposal problem.<br><BR>
Features: <br><BR>
1. automatically recover and recycle the abrasive without stoping to refill, reduce the abrasive consumption,
eliminate sweeping and minimize abrasive disposal costs. <br><BR>
2. pneumaticlly generated abrasive recovery system for easy loading new or resuable abrasive media, and easy
recovery expendable abrasive media for disposal. Spent abrasive dust and debris is recovered continuously and reuseable abrasive is recycled to the gun. <br><BR>
3. adopt suction blast system allow the operator to start and stop blasting as frequently as needed. <br><BR>
4. closed circuit blast gun fitted with boron carbide nozzle dia 6.4mm, 7.9mm, 9.5mm, 11.1mm to customers
require. <br><BR>
5.Integral dust collector houses cartridge filter to trap dust and fines for acceptable dust emission. <br><BR>
6. It can be used as a normal portable suction sand blasting machine only or a vacuum recovery only. <br><BR>
7. Total comressed air powered, no need electric supply. <br><BR>
8. available with different brushes. <br><BR>
Model: ERB-XI <br><BR>
Operating pressure: 0.6 ~ 0.7 MPa <br><BR>
Air consumption: 2.2 - 6 m3/min <br><BR>
Power consumption: Compressed air only <br><BR>
Abrasive storagehopper: 60 liters Approx <br><BR>
Operting hose length: 5 meter max <br><BR>
Blast cleaning: Sa2.5-Sa3.0 <br><BR>
Process capacity: 1-4m2/h <br><BR>
Blast cycle: Continuous <br><BR>
Recommend media:BFA: 20-200#, steel grt: 0.6mm max <br><BR>
Dimension: 1500 x 800 x 1400mm <br><BR>
Abrasive Storage Loading Capacity <br><BR>
BFA : 156kg
SIC : 133kg
Steel grit : 356kg
quartz sand :135kg
Optional Information
|
| |
 |
Vacuum closed circuite pressure blast machine
|
Vacuum closed circuite pressure blast machine consists of pressure blast machine with remote control, blast hose, blast head assembly, reclaimer and vacuum pump recovery system, dust collector and cart. It is widely used fordescaling, surface texturing, and paint preparation, mainly used to clean bigger components, like steel structure, bridge, big tank body, used for big tanks vessel repaire, pipe rust removing at oil field, container renew, etc, andvacuum pump generated recovery system makes it to be used without dust and disposal problem. <br><BR>
Features: <br><BR>
1. Automatically recover and recycle the abrasive while blasting, reduce the abrasive consumption, eliminate sweeping and minimize abrasive disposal costs. <br><BR>
2. Vacuume pump fitted for recovery can reduce the air consumption, easy load new or resuable abrasive media, and easy recovery expendable abrasive media for disposal. <br><BR>
3. Adopt pressure-hold pneumatic remote control, keeping the blast machine under pressure but allow the operatorto start and stop blasting as frequently as needed. The machine is pressurized and depressurized manually, and theremote control handle controls the on/off of the abrasive and air independently. <br><BR>
4. Closed circuit blast gun fitted with boron carbide nozzle dia 6.4mm, 7.9mm,to customersrequire. <br><BR>
5. cartridge dust collector, dust cleaning manually<br><BR>
6. It can be used as a portable pressure sand blasting machine only or a vacuum recovery only. <br><BR>
7. Available with flat brush, cylindrical brush, interior angle brush, exterior brush.
<br><BR>
Model: ERB-YII <br><BR>
Compressed air sourc: 0.6 ~ 0.7 Mpa, <br><BR>
Air consuption: 3~6 m3/min <br><BR>
Blasting pressure: 0.45-0.6Mpa <br><BR>
Vacuum pump:7.5KW, 25Kpa, 360-480m3/h <br><BR>
Pressure vessel capacity: 75 liters approx <br><BR>
Recovery sand hopper: 100Liters<br><BR>
Blasting capacity: 6-15 m2/h, <br><BR>
Blast cleaning: SA 2.5 ~ SA 3.0 <br><BR>
Nozzle: B4c dia 6.4mm, 7.9mm <br><BR>
Operating hose supplied: Dia 32mm x 10 meter <br><BR>
Blast cycle: 15 ~ 30 mins <br><BR>
Recommend media: #24 ~ #46 <br><BR>
Dimension 1700x700x1800mm <br><BR>
Weight: 700kg
<br><BR>
|
| |
 |
Pipe cleaning equipment
|
Internal pipe blasters are specailly designed to blast internal surface of pipes dia from 40mm to 900mm. .<br><br>
The blaster is connected to a blast machine in place of a standard blast nozzle..<br><br>
To blast clean the interior of a pipe, connect the blaster to a blast machine firmly, put the blaster into the pipe and pressurize the machine. Push the blaster through the pipe, abrasive and blasted material will be blown out the other end.
.<br><br>
|
| |
 |
Portable abrasive blast equipment
|
Portable sand blast machines are mainly used to clean bigger components on-site, like steel structure, bridge, big tank body, used for big tanks vessel repaire, pipe rust removing at oil field, container renew, etc, and generally used in open, or used in very big blast rooms.<br><br>
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting.
Portable pressure blasting machines .<br><br>
4720P, 6230P to be supplied with pressure blast machine fitted with remote control system, abrasive valve, moisture separator, 10 meter remote control hose, 10 meter heavy duty blast hose with nozzle holder, coupling and venturi boron carbide blast nozzle. .<br><br>
6230(2)P to be supplied with two outlets allows two operators to work without interference.
Portable suction blasting machines .<br><br>
6060A to be supplied with suction blast machine fitted with electric remote control system, moisture separator, 4 meter remote control line, 4 meter blast hose with nozzle holder, coupling and straight bore boron carbide blast nozzle. .<br><br>
4720P and 6060A are mobiled on 3 wheels or 2 wheels and one leg, or 3 wheels, or in stationary upon request, 6230P and 6230(2)P are supplied in stationary only.
|
| |
 |
diesel control valve 9308Z621C for Delphi
|
For more detailed, please contact Vivian,
Company E-mail:vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
China-Balin Parts Plant, located in Putian, Fujian province, China,
is a professional manufacturer which specialized in fuel injection parts.
Products:
- head rotor
- injector nozzles
- diesel pump plunger ( element)
- d.valves
- control valves (9308- 621C/622b)
- supply pumps
- pump kits
- cam plate
Advantage:
- More than 10 years exports experience
- TS16949
- EXW price
- europe quality
- excellent serviceDeal with quality
Supplier, enjoy business life.
China Balin Parts Plant
|
| |
 |
Delphi control valve 9308Z622B
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
I am Vivian from China-Balin Parts Plant, which is a manufacturer who specializes in Diesel Engine Parts, such as
1. Nozzles (DN, DNOPDN, S, SN, PN. etc.)
2. Plungers(A, AS, P, PS7100, P8500, MW type, etc.)
3. Head rotor
4. Delivery Valve
5. Control Valves(9308-621C, 9308-622B, BF15)
6. Feed Pump, Cam Plate, Drive Shaft, Manget Valves
7. Cat Pencil Nozzle
8. Lucas Head Rotor
9. Other Components.
Our advantage,
1. Factory Price
2. More than 10 years exports experience
3. TS16949
4. International standard quality
5. Excellent after-sell service
|
| |
 |
DELPHI 9308Z621C control valve
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
I am Vivian from China-Balin Parts Plant, which is a manufacturer who specializes in Diesel Engine Parts, such as
1. Nozzles (DN, DNOPDN, S, SN, PN. etc.)
2. Plungers(A, AS, P, PS7100, P8500, MW type, etc.)
3. Head rotor
4. Delivery Valve
5. Control Valves(9308-621C, 9308-622B, BF15)
6. Feed Pump, Cam Plate, Drive Shaft, Manget Valves
7. Cat Pencil Nozzle
8. Lucas Head Rotor
9. Other Components.
Our advantage,
1. Factory Price
2. More than 10 years exports experience
3. TS16949
4. International standard quality
5. Excellent after-sell service
|
| |
 |
Zexel injector nozzle 105007-1130
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
I am Vivian from China-Balin Parts Plant, which is a manufacturer who specializes in Diesel Engine Parts, such as
1. Nozzles (DN, DNOPDN, S, SN, PN. etc.)
2. Plungers(A, AS, P, PS7100, P8500, MW type, etc.)
3. Head rotor
4. Delivery Valve
5. Control Valves(9308-621C, 9308-622B, BF15)
6. Feed Pump, Cam Plate, Drive Shaft, Manget Valves
7. Cat Pencil Nozzle
8. Lucas Head Rotor
9. Other Components.
Our advantage,
1. Factory Price
2. More than 10 years exports experience
3. TS16949
4. International standard quality
5. Excellent after-sell service
DN10S242
DN8S138
DN0SD21
DN0SD126
DN0SD211
DN0SD212
DN0SD1510
DN0SD2110
DN4SD24
DN12SD12
DN0SD165
DN0SD174
DN0SD189
DN0SD193
DN0SD220
DN0SD230
DN0SD1930
DN0SD240
DN0SD293
DN0SD248
DN0SD252
DN0SD2401
DN0SD253
DN0SD256
|
| |
 |
Diesel Plunger 131101-1920
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
I am Vivian from China-Balin Parts Plant, which is a manufacturer who specializes in Diesel Engine Parts, such as
1. Nozzles (DN, DNOPDN, S, SN, PN. etc.)
2. Plungers(A, AS, P, PS7100, P8500, MW type, etc.)
3. Head rotor
4. Delivery Valve
5. Control Valves(9308-621C, 9308-622B, BF15)
6. Feed Pump, Cam Plate, Drive Shaft, Manget Valves
7. Cat Pencil Nozzle
8. Lucas Head Rotor
9. Other Components.
Our advantage,
1. Factory Price
2. More than 10 years exports experience
3. TS16949
4. International standard quality
5. Excellent after-sell service
131152-3120 A158
131152-3320 A160
131152-3420 A161
131152-3520 A162
131152-4020 A168
131152-4320 A172
131152-4520 A174
131152-4820 A177
131152-5220 A182
131152-5320 A183
131152-5520 A186
131152-5620 A188
131152-6820 A204
131152-7320 A210
131152-7520 A214
131152-8020 A220
131152-8220 A126
|
| |
 |
Denso injector nozzle 093400-5570
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
|
| |
 |
New Caterpillar Nozzles 8n7005
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
|
| |
 |
ZEXEL D/Valve 131110-9020
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
134110-7020 P69
134110-7220 P71
134110-7420 P73
134110-7520 P74
134110-7820 P77
134110-8920 P88
134160-1020 11P
138110-0420 13A
146430-0020 VE1
146430-1420 VE15
146430-2120 VE21
2 418 122 057 2 418 122 057
2 418 512 221 2 418 512 221
2 418 512 233 2 418 512 233
2 418 512 238 2 418 512 238
2 418 522 027 OVE223
|
| |
 |
Delivery Valve 131110-5220
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
131110-0520 161S1
131110-0620 161S2
131110-2320 A3
131110-2920 A9
131110-3020 3020
131110-3920 A20
131110-4520 A26
131110-4720 A28
131110-5120 A32
131110-5220 A33
131110-5320 A39
131110-5520 A36
131110-5920 A40
131110-6420 A45
131110-6820 A49
131110-7720 A58
131110-7820 A59
131110-8020 A61
|
| |
 |
Delivery Valve 131110-8820
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
134110-7020 P69
134110-7220 P71
134110-7420 P73
134110-7520 P74
134110-7820 P77
134110-8920 P88
134160-1020 11P
138110-0420 13A
146430-0020 VE1
146430-1420 VE15
146430-2120 VE21
2 418 122 057 2 418 122 057
2 418 512 221 2 418 512 221
2 418 512 233 2 418 512 233
2 418 512 238 2 418 512 238
2 418 522 027 OVE223
|
| |
 |
D.Valve 2 418 552 019
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
090140-0010 50S5
090140-0021 161S1
090140-0061 161S2
090140-0410 090140-0410
090140-0700 13A
090140-0780 A28
090140-1000 A20
090140-1050 105
090140-1160 P8
090140-1200 090140-1200
090140-1350 090140-1350
090140-1430 143
090140-1520 A33
090140-1580 P1
090140-1990 A30
090140-2070 090140-2070
090140-2220 222
096420-0120 120
|
| |
 |
D.Valve 9 411 270 023
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
2 418 554 043 2 418 554 043
2 418 554 045 LYF94
2 418 554 047 9003
2 418 554 057 2 18 554 057
2 418 554 063 LYF15
2 418 554 065 2 418 554 065
2 418 554 067 2 418 554 067
2 418 554 069 2 418 554 069
2 418 554 077 2554-077
2 418 559 009 2 418 559 009
2 418 559 025 2 418 559 025
2 418 559 035 559-539
2 418 559 038 2 418 559 038
2 418 559 040 559-040
2 418 559 045 05F221
|
| |
 |
Bosch Nozzle 0 433 175 203
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
0 433 175 208 DSLA134P816
0 433 175 210 DSLA153P820
0 433 175 230 DSL140P862+
0 433 175 269 DSLA154P960
0 433 175 271 DSLA143P970
0 433 175 275 DSLA158P974
0 433 175 297 DSLA140P1033
0 433 175 298 DSLA154P1034
0 433 175 319 DSLA145P1097
0 433 175 321 DSLA140P1100
0 433 175 395 DSLA154P1320
0 433 175 416 DSLA156P1411
0 433 175 431 DSLA142P1474
0 433 175 882 DSLA145P882
|
| |
 |
ZEXEL Nozzle 105017-0700
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
105017-0740 DLLA160P3
105017-0750 DLLA150P9
105017-0820 DLLA154PN082
105017-0850 DLLA160PN085
105017-0870 DLLA154PN087
105017-0880 DLLA150PN088
105017-0900 DLLA157PN090
105017-1000 DLLA160PN100
105017-1040 DLLA158PN104
105017-1070 DLLA155PN107
105017-1080 DLLA158PN108
105017-1090 DLLA161PN109
105017-1100 DLLA156PN110
105017-1110 DLLA155PN111
105017-1120 DLLA152PN112
105017-1160 DLLA154PN116
105017-1180 DLLA155PN118
105017-1210 DLLA156PN121
|
| |
 |
Zexel injector Nozzle 105017-1840
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
This is Vivian in Sales Dep.3 from China Balin Parts Plant,
which specialized in the manufacture and export
of diesel injection parts, including interrelated
products, plunger, nozzle, delivery valve, head rotor and so on.
And our company passed the TS16949 quality certification.
Advantage:
- TS16949
- EXW price
- Europe quality
- Excellent service Deal with quality
- More than 10 years producing and exporting experience
105017-1160 DLLA154PN116
105017-1180 DLLA155PN118
105017-1210 DLLA156PN121
105017-1300 DLLA157PN130
105017-1330 DLLA157PN133
105017-1350 DLLA160PN135
105017-1410 DLLA160PN141
105017-1520 DLLA153PN152
105017-1550 DLLA154PN155
105017-1590 DLLA160PN159
105017-1770 DLLA153PN177
105017-1780 DLLA153PN178
105017-1790 DLLA155PN179
105017-1840 DLLA152PN184
105017-1860 DLLA154PN186
105017-2000 DLLA155PN200
105017-2020 DLLA155PN202
105017-2090 DLLA158PN209
105017-2200 DLLA146PN220
|
| |
 |
Injector Nozzles DLLA158P4820
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
China-Balin Part Plant:
We are a guaranteed manufacturer about the diesel engine parts, including Head rotor, diesel injection nozzle, plunger, repair kits, Gasket kits, deliver valve, cam disk, feed pump, Drive Shaft, test bench, Magnet Valve, Control valves, etc.
Our advantage:
1. More than 10 years producing and exporting experience
2. excellent quality and standards of product
3. Excellent after-sale service
4. Fast shipping system
5. EXW price
6. Wide range production
7. Huge stock support
DLLA150P034
DSLA136P804/
DSLA142P843
DSLA142P1025
DLLA150P1076
DLLA148P1347
DLLA118P1358
DLLA158P1385
DLLA144P1417
DSLA128P1510
DLLA149P1515/
DSLA143P1523
DLLA150P1622
DLLA151P1656
DLLA145P1686
DLLA148P1688
DLLA152P1690
DLLA150P1695
DLLA143P1696
DLLA144P1707
DLLA142P1709
DLLA150P1712
DLLA153P1721
DSLA140P1723
DLLA146P1724
DLLA146P1725
DLLA152P1768
DLLA150P1781
DLLA154P016
DLLA156P150
DLLA160P89
DLLA335-50
DSLA145P539
DLLA150P536
155X1
|
| |
 |
Zexel injector nozzles 105015-4640
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
China-Balin Part Plant:
We are a guaranteed manufacturer about the diesel engine parts, including Head rotor, diesel injection nozzle, plunger, repair kits, Gasket kits, deliver valve, cam disk, feed pump, Drive Shaft, test bench, Magnet Valve, Control valves, etc.
Our advantage:
1. More than 10 years producing and exporting experience
2. excellent quality and standards of product
3. Excellent after-sale service
4. Fast shipping system
5. EXW price
6. Wide range production
7. Huge stock support
093400-5320 DN20PD32
105007-1120 DN0PDN112
0 434 250 001 DN0SD21
0 434 250 014 DN4SD24
093400-0800 DN4SD24ND80
0 433 171 010 DLLA160P9
0 433 171 032 DLLA150P31
0 433 171 041 DLLA143P40
0 433 171 043 DLLA150P43
0 433 171 052 DLLA150P52
0 433 171 059 DLLA150P59
0 433 171 084 DLLA142P87
0 433 171 087 DLLA150P91
0 433 171 128 DLLA146P140
0 433 171 130 DLLA144P144
0 433 171 134 DLLA148P149
0 433 171 137 DLLA146P154
0 433 171 149 DLLA146P166
0 433 171 157 DLLA150P178
0 433 171 161 DLLA144P184
|
| |
 |
Zexel Injector Nozzle 105017-1860
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
China-Balin Part Plant:
We are a guaranteed manufacturer about the diesel engine parts, including Head rotor, diesel injection nozzle, plunger, repair kits, Gasket kits, deliver valve, cam disk, feed pump, Drive Shaft, test bench, Magnet Valve, Control valves, etc.
Our advantage:
1. More than 10 years producing and exporting experience
2. excellent quality and standards of product
3. Excellent after-sale service
4. Fast shipping system
5. EXW price
6. Wide range production
7. Huge stock support
105017-0490 DLLA154PN049
105017-0490 DLLA154PN049
105017-0610 DLLA154PN061
105017-0610. DLLA154PN061
105017-0610 DLLA154PN061
105017-0620 DLLA154PN062
105017-0620 DLLA154PN062
105017-0640 DLLA154PN064
105017-0640 DLLA154PN064
105017-0670 DLLA154PN067
105017-0670 DLLA154PN067
105017-0680 DLLA154PN068
105017-0680 DLLA154PN068
105017-0680 DLLA154PN068
105017-0870 DLLA154PN087
105017-0870 DLLA154PN087
105017-1160 DLLA154PN116
105017-1160 DLLA154PN116
|
| |
 |
Bosch Injector Nozzle 0 433 271 116
|
For more detailed, please contact Vivian,
Company E-mail: vivian@china-balin.com
MSN: vivian_chinabalin@hotmail.com
SKYPE: vivian.vivian50
TEL: 86-594-2650550
CELL: +8615375989230
FAX: 86-594-2660550
WEB: www.china-balin.com
China-Balin Part Plant:
We are a guaranteed manufacturer about the diesel engine parts, including Head rotor, diesel injection nozzle, plunger, repair kits, Gasket kits, deliver valve, cam disk, feed pump, Drive Shaft, test bench, Magnet Valve, Control valves, etc.
Our advantage:
1. More than 10 years producing and exporting experience
2. excellent quality and standards of product
3. Excellent after-sale service
4. Fast shipping system
5. EXW price
6. Wide range production
7. Huge stock support
105015-6710 DLLA160SN671
105015-6720 DLLA155SN672
105015-6790 DLLA149SN679
105015-6810 DLLA152SN681
105015-6850 DLLA155SN685
105015-6930 DLLA148SN693
105015-6940 DLLA140SN694
105015-6981 DLLA160SN698
105015-7020 DLLA150SN702
105015-7040 DLLA150SN704
105015-7050 DLLA150SN705
105015-7070 DLLA155SN707
105015-7100 DLLA155SN710
105015-7110 DLLA155SN711
105015-7131 DLLA153SN7131
105015-7180 DLLA142SN718
105015-7220 DLLA150SN722
105015-7250 DLLA157SN725
105015-7270 DLLA155SN727
|
| |
|
