+

（1）The roll is produced by centrifugal compound casting technology, which has high hardness, good abrasion resistance and long working life. （2）Surface of the roll is made of alloy material (Ni Cr Mo), thickness is 25-35mm, working life is long. （3）The inner part of the roll is made of ductile iron, which has high tensile strength and bending strength. Broken roll never happens. （4）The structure is double nut and one guide screw, which can accurately adjust the distance between the rolls. （5）Low energy consumption and high output. The cracker can produce 20-25 meshes powder 15 tons/24 hours.

1. Technology parameters *variety: 300―1200g/m2 gray paper *degree of drying: 90%above *working linear pressure: 90KN/m *working speed: 450m/min *net paper width: 5700mm *track gauge: 7150mm 2.Performance advantages and characteristics *Finishing,keep the paper surface bright,clean and smooth,at the same time keep the thickness of paper; *Revise the sickness of paper,keep the paper even tightnese *Top roller device:diameter:930X6000 hollow roller;material:high nickel chrome molybdenum alloy,chilled cast iron,centrifugal casting,surface hardness of roller≧HS72° hsrdness difference4~6° , sickness of chilling layer 20－30mm,the sickness of roller 200mm.

1. Main application: being a new device to support pretreatment technology in the process of oil extraction and to crush granular oil plants like the soybean, peanut, and cottonseed. By virtue of fully and uniformly crushing the granular oil plants, the granularity of granular oil plants becomes fully smaller so as to be better for rolling process, for obviously improving the rolling effect, and for further improving the oil yield and productivity. 2. Technical advantages: (1) The centrifugal composite casting process is used for producing the roller whose outer layer is made of high nickel chrome molybdenum alloy characterized by high hardness and good wear resistance; and whose core is made of ductile iron characterized by strong strength and high toughness. (2) The hard alloy layer at the outside of roll is greatly increased in thickness and the service life of roll is dramatically prolonged. (3) Unique structure with four rolls of three rolling makes the oil plants to be crushed three times by four rolls in a machine. The oil plants can be crushed more fully and uniformly; and the productivity is apparently improved. (4) The fine-tuning part of device is used for eliminating the micro-gap among rolls for crushing through turbine, screw, and double nut. Meanwhile, the crushing pressure is guaranteed on the action of butterfly spring; hence, one of the four rolls is fixed and the other three can be randomly adjusted. (5) The feeding part is implemented forcibly and uniformly and the production efficiency is improved. (6) The multi-level magnetic separation device is used so that the roll is avoided damaging by the hard impurities in the raw materials.

1. Main application: The YBKG series teeth roll sheller is referred to as a multifunctional device in terms of crushing granular materials like soybean and peanut and of shelling materials like cottonseed, sunflower seed, and tung tree nuts. 2. Characteristic feature: The core part of device is roll made through the centrifugal composite casting technology; and covered by the high nickel chrome molybdenum alloy. The distances between roll teeth are equal to one another. In addition, the device is featured by compact structure, wide application, high shelling efficiency and good crushing effect, small powder, low energy consumption, easy operation and maintenance, and long service life, which can be taken as an updated product of sheller.

1. Product instruction Four-roller changed working method traditional refiner as two-roller rolling for once, instead, it utilize one motor to supply power for four roller, thus to achieve working mode as four roller mixing rubber for three times on one equipment. This improves production efficiency of equipment greatly and reduces energy consumption of specific yield and labor cost obviously. This equipment with four rollers rationally arranged has smooth rubber mixing process and convenient, quick, correct roller interval adjustment based on hydraulic method. 2、Technical features (1) The rollers all adopt centrifugal composing casting process, resulting in compact roller organization and even clear chill layer and completely eradicate defects as air hole, sand hole and slag inclusion. (2) Material of roller working layer is nickel-chromium alloy characterized with high hardness (HS75°±2°), good abrasive resistance and long service life. (3) Roller adopts surrounding drilling water circulation cooling to reduce temperature of roller working surface effectively (80-90℃), thus to guarantee quality of reclaimed rubber. (4) The structure of four-roller pressing for three times could improve production efficiency greatly, reduce energy consumption of specific yield and reduce number of operation worker at the same capacity. (5) The hydraulic roller interval adjustment could provide quicker operation, more correct adjustment and safer operation. (6) The process of four-roller pressing for three times continuously could guarantee the product with better physical index and higher quality.

1. Main application: being a key device to be used in the pretreatment process of the vegetable oil processing enterprises and to roll the oil plants like soybean, peanut, and cottonseed. Depending on the rolling effect among rolls, the crushed oil plants can be rolled into slices for increasing the specific surface area of oil plants, for fully absorbing moisture and heat, and for further providing more powerful conditions to the follow-up oiling process. 2. Technical advantages: (1) The centrifugal composite casting process is used for producing the roller whose outer layer is made of high nickel chrome molybdenum alloy characterized by high hardness and good wear resistance; and whose core is made of ductile iron characterized by strong strength and high toughness. (2) The hard alloy layer at the outside of roll is greatly increased in thickness and the service life of roll is dramatically prolonged. (3) The device is cooled in the manner of drilling circumferentially and water cycling. The effect is obvious and the phenomenon of rolling up is effectively avoided. (4) The distances among rolls are adjusted on the action of hydraulic system and hand wheel, which makes it more quickly and accurately. (5) By virtue of heart through roll shaft and high-precision balancing technology, the vibration caused by centrifugal force at high speed is effectively removed. (6) The multi-level magnetic separation device is used so that the roll is avoided damaging by the hard impurities in the raw materials.

under the hermetically closed, pressure and temperature controllable condition, the rubber/plastics and other accessory ingredients can be successfully kneaded or plasticated with the characteristics of high productivity, homodispersion of materials, good quality, no contamination to environment, convenience for the processes of material change, color change and cleaning. the mixing chamber, rotors, float weight and other parts are all adopting jacketed structure for the availability of ingoing of media such as steam, conducting oil and water for heating and cooling so as to suit the various requirements for the process of rubber mixing or plastics plasticating and to ensure the processed quality of materials good and stable. the spiral angle and the working length of the wing of the rotors are designed intelligently and reasonably and they can make the materials obtaining an optimal kneading effect. The wings ridges and the end surfaces of the rotor are bead welded with the abrasion resistant sintered carbide and the faying surfaces of mixing chamber, rotor and upper ram which directly touching with the materials are all polished, ground and plated with hard chromium and consequently the surfaces are smooth and bright as well as corrosion resistant. the materials can be charged from the rear door(or the side ) of the machine frame and turn forward the mixing chamber in 140° for discharging the materials and in doing so, it will be either convenient for the linkage or the first and second working procedure of the production flow of for the convenience of the observation and cleaning of the mixing chamber and rotor. at the joint between the top of mixing chamber and the cantilevered arm of the frame adopt arc-shaped plate-groove labyrinth type sealing and therefore the sealing dust prevention effect is very good. The end face of rotor is sealed by end contact sealing with external pressure type monlubricating sealing and it. the turning mechanism adopts the enveloping worm pair (TOP)and it produces a high driving coefficient of performance and high bearing strength, in addition the discharging of materials with no shutdown can be carried out successfully so that it avoids the frequent starting up of the motor and consequently it prolongs the service life of it to a large extent. the electric-control system adopts PLC device and it possesses of a perfect and reliable automatically-controlled monitoring and alarming functions as well as the necessary interlocking protective function.

This mixer is a new and high-tech equipment developed for the mixing of high-power or low-power foaming plastics and for the foaming of rubber and plastics products. This mixer possesses of the automatically constant temperature water supply system and the high and low pressure control device of ram. This mixer possesses of the time sequential control and temperature sequential control functions. According to the requirement, the revolution speed of front rotor can be raised up to upwards of 40/min. According to the request of users, the heating mode can be provided with the steam heating, electric heating or heating by heat conductive oil. This product is a most ideal plastics mixing equipment to produce the roam plastics for sofa cushion, sofa back cushion, automobile cushion and footwear, etc…… Main technical parameter

Men jeans Bape Jeans, Ed Hardy Jeans, Crown Holder Jeans, Coogi Jeans, Christan Audigier Jeans, Evisu Jeans, Ture Religion Jeans, Ture Religion AAA Jeans, Affliction Jeans, Armani Jeans, D&G Jeans, Diesel Jeans, G-Star Jeans, Gucci Jeans, Just Cavalli Jeans, Laguna Beach Jeans, Levis Jeans, Rock And Republic Jeans, Versace Jeans, Louis Vuitton Jeans, etc.

www.buynewests.com the latest style is of high quality. We fell that our product is the best kind in the world and we can easily compete against other competition in price. They are far better in so many ways. If you are interested in our web, welcome into our web: www.buynewests.com or www.sneakeronlinesale.com

ClCOYOTE Sandals ,is 5 layers of different materials by the superposition, ClCOYOTE Sandals flexible EVA backing with warm shock, light, wearable, non-slip performance. Coarse jute reinforcement play a role in the low, natural rubber, natural cork footbed mixed with high flexibility, durability and superior cushioning soles of the feet. Can be a fine jute reinforcement, moisture, moisture characteristics, and Ortega soft natural latex film. Anti-fur imports of butter with moisture, soft, deodorant effect. Welcome into our web: www.sneakeronlinesale.com

Delikon Over Braided Flexible metal Conduit,Conduit connector for industry cables management overbraided flexible conduit systems from Delikon offer a choice of a whole range of sizes and constructions to provide the best solution for the most demanding applications. Delikon overbraided flexible conduit systems protect vulnerable cabling on metal machining, welding or heavy plant where abrasion, spillage and increased temperature are all serious operational considerations. They also satisfy arduous demands on railway rolling stock and on essential trackside applications, such as signaling and communications. ------------------ http://www.delikon.com <p align="center"><a href="http://www.delikon.com/braid12.htm"><img border="0" src="http://www.delikon.com/images/indbraid2.jpg" alt="Delikon Over Braided Flexible Conduit,Conduit Fittings for industry cables management">

industry cable management over braided steel liquid tight conduit,fittings Overbraided metallic LiquidTight conduit with stainless steel braid is suitable for industry environments wirings protections. Overbraided LiquidTight metal conduit with steel Braid for contruction machine wirings Galvanised flexible Steel Conduit, Smooth PVC Covering, Metal Overbraid Braided Liquidtight Flexible EMC Shielded metal Conduit EMI/RFI Shielding electrical Flexible Conduit,Liquid-tight Model: YF-705 This conduit is designed to protect sensitive electronic circuits in applications such as communications, radar and data transmission from Electro-Magnetic and Radio Frequency Interference (EMI / RFI). Most suitable for radar equipments, airports, CNC machineries and PLC wirings in industrial environments. *Wire over-braiding provides more abrasion resistant, EMI shielding and resistance to hot metal splashes. *Explosion proof. Liquid-tight. *Durable and long life. *High tensile strength. *Inner core made from galvanized steel strip. *Square locked construction with packing for more tensile strength or air tightness. *Other packing materials: copper bonding (grounding) wire, PVC wire packing is also available. ======================= http://www.delikon.com http://www.semiconduits.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/YF-705.gif" alt="EMI/RFI Shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/cbraidst.jpg" alt="braided flexible steel conduits">

water proof electric flexible steel conduit and fittings for WIRING on railway system LOW SMOKE,ZERO halogen Water-tight electric Flexible metal Conduit for mass transport systems ( LSHF-707 ) The specially formulated thermoplastic jacket has excellent flame retardation and low smoke and toxicity generation characteristics. Acidic gases such as hydrogen chloride, hydrogen fluoride and hydrogen bromide are virtually eliminated as products of combustion. *Galvanized steel strip core (square locked or interlocked) *Specially formulated thermoplastics, low smoke, halogen free *1/4"~4" trade size *Water-tight Flexible metallic conduit with low smoke, halogen free, water tight jacket: *This water proof flexible steel conduit is designed for applications where safety concerns exist regarding a materials reaction in a fire situation. *Water tight jacket made of low smoke, halogen free thermal- plastics, with excellent flame retardation and low smoke and toxicity generation characteristics. *Durable and long life. *Inner core made from galvanized steel strip. *Square locked construction for more flexibility or interlocked for more strength. . Applications: This product is ideally suited for installation in confined or enclosed areas where construction materials must have limited smoke, low flame spread and low toxic gas emissions in the event of fire. Such applications include mass transit vehicles where water proof flexible conduit is extensively used for wiring harnesses within and under passenger rail cars. Other applications include use in underground subway structures and tunnels. ============================= http://www.delikon.com =========================== <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/lshf2.jpg" alt="Low Smoke,Halogen Free">

small bore Stainless Steel flexible Conduit for sensor and laser cable,small metal flexible hose Flexible stainless steel conduit for electric wirings protections Strip wound small ID flexible metallic conduit,hose for electrical wirings armoring braided Small BORE Flexible stainless steel conduit,for automobile & industry wiring harness Optical Fiber and sensors wirings protects Flexible metal conduit Small bore Flexible metal conduit,for protection of instrument wirings Small id Flexible Stainless Steel Conduit ( AT ) Small bore instrumentation tubing flexible conduit flexible stainless steel conduit for electric wirings *Stainless steel strip (square locked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protections. MADE FROM STAINLESS STEEL STRIPS: *ALL Stainless steel construction for corrosion resistant. *Durable and long life. *Designed for tight-spot installation and where continuous flexing is required Applications: Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, electronic instruments and industrial control wirings. Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics. SMALL BORE HOSE Delikon manufactures unique tubing that is relied on in numerous industries. The tubing is produced by helical coiling of a cold-rolled metal strip onto a spindle, with the helical coils being linked with each other by means of a special type of strip profile. Basic materials for the strip are stainless steel or galvanized steel strip. However, other metals are also available. Applications: Instrumentation tubing is used by manufacturers of various industries, such as Process & Control Instrumentation, Measuring & Controlling Devices, Analytical Instruments, Medical Instruments and many others with specific applications including temperature measuring, wiring conduit or armor cable and protective casing. Instrumentation tubing is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. -------------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon -------------------------------- <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/at4.jpg" alt="Flexible stainless steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atnew1.jpg" alt="small bore tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atC.gif" alt="small bore Instrumentation tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/fibre2.jpg" alt="prtecting your inspection equipment wirings"> Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications. TYPE: AT-SL-JACKETED -------------------------------- The PVC covering is applied onto the metal surface with a Vacuum process. The finished surface will have a spiral corrugated pattern. It is most suitable for tight-spot installation and where a certain water tightness is required <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacketp.jpg" alt="Flexible stainless steel conduits with pvc jacket"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacket.gif" alt="Flexible stainless steel conduits with pvc jacket"> TYPE: AT-SL-EXTRUDED -------------------------------- The PVC covering is extruded onto the metal surface, thus producing a smoother finished surface. when used with liquid-tight fittings it offers a higher degree of liquid tightness than the vacuum jacketed type. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> TYPE: AT-SL-SLEEVED -------------------------------------- A short length of the AT-SL tubing is directly inserted into a thermoplastic sleeve. A very smooth outer surface and a very uniform thickness of sleeving is ensured. For cut to length OEM orders. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert1.jpg" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert2.gif" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> TYPE: AT-SL-BRAIDED High tensile strength metal wires are tightly braided onto the AT-SL small bore flexible metal tubing for optimum protection. It provides increased abrasion resistant, improved EMI screening, and resists hot metal splashes. <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid1.gif" alt="small bore Instrumentation tubing with metal braiding"> <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid2.gif" alt="small bore Instrumentation tubing with metal braiding"> ============================= http://www.delikon.com ===========================

Electric over braided Flexible Conduit and conduit fittings for EMi shielding and abrasing resistance Comprises a standard conduit construction, with metallic overbraid. Typical electric wiring and cables protections applications where the following is a consideration: Electromagnetic Interference (EMI) *computers * telecommunications * control systems Abrasion resistance * railway rolling stock * heavy duty industrial applications Mechanical integrity * security/CCTV * anti-vandal applications http://www.delikon.com

METAL liquid tight connector,liquid tight conduit fitting for LIQUID TIGHT CONDUIT,liquidtight connector and fittings LIQUID TIGHT metal connector liquid tight connector,LT connector,LT fittings conector recto hermetico,curvo 90 Liquid-tight zinc die cast connectors Model: DMA,DMB Available in 3/8 inch to 4 inch trade size Zinc Die-cast construction For use with both Metallic Liquid tight Conduit and Nonmetallic Liquid tight Type B Resistant to outdoor weather conditions Liquidtight/Raintight/OilTight Suitable for wet locations Suitable for grounding (through 1-1/4") Locknut included ======================= http://www.delikon.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/dmb.gif" alt="Liquid-tight zinc die cast connectors"> <p align="center"><a href="http:/

hazardous area electric wiring Braided metal liquid tight conduit,conduit fittings Constructions & features: 1)The core made of galvanized steel strips, hellically wound with PVC covering. Providing good mechanical protection and water tightness. 2) Metal wire over braiding provides increased pressure rating (explosion proof),abrasion resistant and EMI shielding. Suitable for: 1)Industrial enviroments, expecially suitable for protections of machineries cables and wiring in wet and hazardous locations. 2)Tele-communications equipments. EMI shielding of calbes. 3)Computer room wirings. 4)Public electrical facilities and installations. http://www.delikon.com

small bore Stainless Steel flexible Conduit for laser sensor thermal coupler wirings Flexible stainless steel conduit for electric wirings protections Strip wound small ID flexible metallic conduit,hose for electrical wirings armoring braided Small BORE Flexible stainless steel conduit,for automobile & industry wiring harness Optical Fiber and sensors wirings protects Flexible metal conduit Small bore Flexible metal conduit,for protection of instrument wirings Small id Flexible Stainless Steel Conduit ( AT ) Small bore instrumentation tubing flexible conduit flexible stainless steel conduit for electric wirings *Stainless steel strip (square locked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protections. MADE FROM STAINLESS STEEL STRIPS: *ALL Stainless steel construction for corrosion resistant. *Durable and long life. *Designed for tight-spot installation and where continuous flexing is required Applications: Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, electronic instruments and industrial control wirings. Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics. SMALL BORE HOSE Delikon manufactures unique tubing that is relied on in numerous industries. The tubing is produced by helical coiling of a cold-rolled metal strip onto a spindle, with the helical coils being linked with each other by means of a special type of strip profile. Basic materials for the strip are stainless steel or galvanized steel strip. However, other metals are also available. Applications: Instrumentation tubing is used by manufacturers of various industries, such as Process & Control Instrumentation, Measuring & Controlling Devices, Analytical Instruments, Medical Instruments and many others with specific applications including temperature measuring, wiring conduit or armor cable and protective casing. Instrumentation tubing is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. -------------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon -------------------------------- <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/at4.jpg" alt="Flexible stainless steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atnew1.jpg" alt="small bore tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atC.gif" alt="small bore Instrumentation tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/fibre2.jpg" alt="prtecting your inspection equipment wirings"> Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications. TYPE: AT-SL-JACKETED -------------------------------- The PVC covering is applied onto the metal surface with a Vacuum process. The finished surface will have a spiral corrugated pattern. It is most suitable for tight-spot installation and where a certain water tightness is required <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacketp.jpg" alt="Flexible stainless steel conduits with pvc jacket"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacket.gif" alt="Flexible stainless steel conduits with pvc jacket"> TYPE: AT-SL-EXTRUDED -------------------------------- The PVC covering is extruded onto the metal surface, thus producing a smoother finished surface. when used with liquid-tight fittings it offers a higher degree of liquid tightness than the vacuum jacketed type. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> TYPE: AT-SL-SLEEVED -------------------------------------- A short length of the AT-SL tubing is directly inserted into a thermoplastic sleeve. A very smooth outer surface and a very uniform thickness of sleeving is ensured. For cut to length OEM orders. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert1.jpg" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert2.gif" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> TYPE: AT-SL-BRAIDED High tensile strength metal wires are tightly braided onto the AT-SL small bore flexible metal tubing for optimum protection. It provides increased abrasion resistant, improved EMI screening, and resists hot metal splashes. <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid1.gif" alt="small bore Instrumentation tubing with metal braiding"> <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid2.gif" alt="small bore Instrumentation tubing with metal braiding"> ============================= http://www.delikon.com ===========================

over braided flexible steel liquid tight conduit for machine cable management Overbraided metallic LiquidTight conduit with stainless steel braid is suitable for industry environments wirings protections. Overbraided LiquidTight metal conduit with steel Braid for contruction machine wirings Galvanised flexible Steel Conduit, Smooth PVC Covering, Metal Overbraid Braided Liquidtight Flexible EMC Shielded metal Conduit EMI/RFI Shielding electrical Flexible Conduit,Liquid-tight Model: YF-705 This conduit is designed to protect sensitive electronic circuits in applications such as communications, radar and data transmission from Electro-Magnetic and Radio Frequency Interference (EMI / RFI). Most suitable for radar equipments, airports, CNC machineries and PLC wirings in industrial environments. *Wire over-braiding provides more abrasion resistant, EMI shielding and resistance to hot metal splashes. *Explosion proof. Liquid-tight. *Durable and long life. *High tensile strength. *Inner core made from galvanized steel strip. *Square locked construction with packing for more tensile strength or air tightness. *Other packing materials: copper bonding (grounding) wire, PVC wire packing is also available. ======================= http://www.delikon.com http://www.semiconduits.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/YF-705.gif" alt="EMI/RFI Shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/cbraidst.jpg" alt="braided flexible steel conduits">

Electril Flexible metal braided Liquid tight Conduit,with Metal over-braided for machinery cable Wire Over-Braided Flexible Conduit ( SM-701 ) most suitable for demanding industrial electric wiring and cables protection applications. *Galvanized steel helically wound with PVC coating and wire over-braid. *Trade size: 3/8"~2" (Interlocked profile for increased tensile strength.) *Liquid-tight *Explosion proof (Suitable for use in Hazardous Location) *High Tensile strength MADE FROM INTERLOCKED CONDUIT WITH WIRE OVER-BRAID: *Wire over-braiding provides more abrasion resistant, EMI screening and resistance to hot metal splashes. *Explosion proof. Liquid-tight. *Durable and long life. *High tensile strength. *Inner core made from galvanized steel strip. *Square locked construction with packing for more tensile strength or air tightness. *Other packing materials: copper bonding (grounding) wire, PVC wire packing is also available. Applications: Suitable for use in Hazardous Locations; Industrial environments where higher abrasion resistance or screening are required. ======================= http://www.delikon.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://delikon.com/images/sm701.gif" alt="Electric flexible conduit,Liquid-tight,Wire Over-braided">

EMc screening and emi shield braided flexible conduit systems In applications where electromagnetic interference can be of particular concern, Delikon has a range of dedicated over braided flexible conduit systems that can provide the required standard of protection for cables. The systems provide high EMI screening and offer a range of protection to the cables carried by the system. In combination with the system's specially designed metallic fittings, the flexible conduit system can afford a high degree of EMI screening capability for a range of industrial and commercial applications. Overbraiding also increases the security of installations in sensitive or high risk public areas, typical applications being underground, communications, public safety, security, lighting and CCTV installations. Delikon screened flexible conduit systems offer cost-effective alternatives to individually screened cables within applications where cross talk has no adverse effect. Additionally, the user gains the mechanical advantage of a cable management system, which affords the means to easily add, substitute or replace cables in an existing cable run, at any time. http://www.delikon.com/braid.html <p align="center"><a href="http://www.delikon.com/braid.html"><img border="0" src="http://www.delikon.com/images/braidc1.jpg" alt="EMI screening capabilities in braided flexible conduit systems">

water proof over Braided Flexible metal Conduit for petroleum industry PLC wirings,steel mill wiring braided flexible conduit Over braided flexible metal conduit,Liquid Resisting,EMI shielding Clean data transmission in a noisy environment is an ever increasing requirement on todays crowded factory floors. Braided flexible steel conduit systems provide excellent EMI and RFI shielding, as well as mechanical protection, resulting in improved data transmission for factory automations. OverBRAIDing Flexible metal conduit,water proof,Emc screening *Resists high temperature and hot metal splashes Constructions & features: 1)The core made of galvanized steel strips, hellically wound with PVC covering. Providing good mechanical protection and water tightness. 2) Metal wire over braiding provides increased pressure rating (explosion proof),abrasion resistant and EMI shielding. Suitable for: 1)Industrial enviroments, expecially suitable for protections of machineries cables and wiring in wet and hazardous locations. 2)Tele-communications equipments. EMI shielding of calbes. 3)Computer room wirings. 4)Public electrical facilities and installations. 1) Electromagnetic Interference (EMI) considerations: *computers rooms *telecommunications * control systems 2) Abrasion resistance considerations: *railway rolling stock *heavy duty industrial applications 3) Hot metal splashes resistance considerations: *steel mills *petrochemical plants,Chemicals,Heavy Industrial wirings 4) Mechanical integrity: *security/CCTV *anti-vandal applications ======================= http://www.delikon.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/YF-704.jpg" alt="Flexible metallic conduit,water proof,EMI shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/d3-704.gif" alt="Flexible metallic conduit,water proof,EMI shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/cbraidst.jpg" alt="braided flexible steel conduits"> <p align="center"><a href="http://www.delikon.com/braids.htm"><img border="0" src="http://www.delikon.com/images/ship1.jpg" alt="For Ship building">

DELIKON liquid tight connector and liquid tight conduit fittings,metric and pg liquid tight conduit fittings liquid tight connector,LT connector,LT fittings conector recto hermetico,curvo 90 Liquid-tight zinc die cast connectors Model: DMA,DMB Available in 3/8 inch to 4 inch trade size Zinc Die-cast construction For use with both Metallic Liquid tight Conduit and Nonmetallic Liquid tight Type B Resistant to outdoor weather conditions Liquidtight/Raintight/OilTight Suitable for wet locations Suitable for grounding (through 1-1/4") Locknut included ======================= http://www.delikon.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/dmb.gif" alt="Liquid-tight zinc die cast connectors"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/liqcon1.jpg" alt="Liquid-tight connectors">

Anionic type of cellulose ether, white or ivory fibrous powder or particles, density of 0.5-0.7 g/cubic centimeters, almost odorless and tasteless, suction wet sex. Easy to spread in the water into cellophane tape shape solution, such as ethanol solvent in organic insoluble in. 1% aqueous pH of 6.5 ~ 8.5, when pH > 10 or < 5, rubber paste viscosity significantly reduced, in pH = 7 performance is the best. On the thermal stability, in 20 ℃ below viscosity rise up quickly, 45 ℃ change slower, more than 80 ℃ long time heating can make its colloid degeneration and viscosity and performance obviously decreased. Soluble in water, transparent solution; In alkaline solution is stable, encounter acid hydrolysis is easy, PH value of 2-3 will have the precipitation, encounter more price metal salt will also reaction appear precipitation. Carboxymethyl cellulose sodium salt in the main for drilling fluid viscous drop filter lost agent, carboxymethyl cellulose sodium salt long chain with multiple clay particles can absorb, can increase mud cake of the cementing sex, can restrain shale hydration expansion and consolidate the role of the wall. Sodium carboxyl methyl cellulose salt solution has many excellent properties and chemical stability, not easy corrosion metamorphism, for physical security harmless, with floating and stable emulsification, good bonding and salt resistance ability, to the oil and organic solvent good stability.

Oil drilling for oil and gas well drilling mud aggravating the rotating circulation cooling agent drill, and take away the cutting down of pyroclasts, lubrication drill pipe, closed hole wall, control oil and gas pressure, prevent from gush oil Wells

Ceramsite oil fracturing proppant is a ceramic particle products, has the very high fracturing strength. It mainly used in oil field underground support, to increase oil and gas production, belong to the environmental friendly products. This product use high quality bauxite and many kinds of materials, with ceramic sintering and into, is a natural quartz sand, glass ball, metal ball and so on low intensity proppant alternative, the yield of oil and natural gas have good effects. Oil and gas deep well drilling, high closure pressure by fracturing low permeability ore processing, make oil and gas rock crack, oil and gas from cracks in the collection of the channel. Use ceramsite proppant materials with high pressure solution into the strata filling in the rock fracture, which has a support for stress release and fracture closed effect and keep high diverting capacity, oil and gas flow, to increase production. Practice has proved, use ceramsite support agent can improve the yield of the oil Wells fracturing 30-50%, still can prolong service life oil and gas well. Ceramsite oil fracturing proppant by the high quality bauxite as the main raw material the fine ground to a fine powder broken, match with various additives, repeatedly mix to practice, granulating, polishing. High temperature sintering and become, the product has high compression strength, low density, ball for good, good surface finish, and diversion ability, etc.

silicone shaped egg rings 1.size:L28xW18xH2.5cm 2.material:100% food grade silicone 3.color:can be customized 4.temperature range: -40°C to 240°C 5.usage:safe use in ovens, microwave and freezer 6.feature:nonstick, eco-friendly, washable 7.FDA, LFGB approval 8.logo can be cutomized

hot selling silicone egg whisk L21/25/30cm made of food grade silicone safe used in ovens,microwaves and freezer non-stick,washable

silicone boiled egg tool 1. size:10*7cm 2. material:100% food grade silicone 3. color:can be customized 4. temperature range: -40°C to 240°C 5. usage:safe use in ovens, microwave and freezer 6. feature:nonstick, eco-friendly, washable 7. FDA, LFGB approval 8. logo can be cutomized

silicone fried egg rings Size:13*13cm made of food grade silicone safe used in ovens,microwaves and freezer non-stick,washable FDA,LFGB approval

Silicone egg whisk L26/29/32cm made of food grade silicone safe used in ovens,microwaves and freezer non-stick,washable

silicone heat-resistant mats 1. material:100% food grade silicone 2. color:can be customized 3. temperature range: -40°C to 240°C 4. usage:safe use in ovens, microwave and freezer 5. feature:nonstick, eco-friendly, washable 6. FDA, LFGB approval 7. logo can be cutomized

Novel silicone pot mats 1. material:100% food grade silicone 2. color:can be customized 3. temperature range: -40°C to 240°C 4. usage:safe use in ovens, microwave and freezer 5. feature:nonstick, eco-friendly, washable 6. FDA, LFGB approval 7. logo can be cutomized

fish shape silicoen heat-resist pot holder 1. material:100% food grade silicone 2. color:can be customized 3. temperature range: -40°C to 240°C 4. usage:safe use in ovens, microwave and freezer 5. feature:nonstick, eco-friendly, washable 6. FDA, LFGB approval 7. logo can be cutomized

silicone egg poacher 1. size:9.5x12.5 cm 2. material:100% food grade silicone 3. color:can be customized 4. temperature range: -40°C to 240°C 5. usage:safe use in ovens, microwave and freezer 6. feature:nonstick, eco-friendly, washable 7. FDA, LFGB approval 8. logo can be cutomized

silicone whisk L23/27/30cm made of food grade silicone safe used in ovens,microwaves and freezer non-stick,washable

Main technique target of Air separation plant Products Capacity(m3/hr)Purity(%) Pressure(Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8% 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment ofAir separation plant 1. Air compressor 2. Air tank 3. Precision filter 4. Pre-cooler 5. Water separator 6. Purifier 7. Heater of Purifier 8. Rectification column 9. Heater of the rectification column 10.Expansion Turbine 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air separation plant * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of GB8982-1998<medical oxygen> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security _ The outside compression process is oxygen be compressed at room temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability - liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

Tampico fibre (Mexican fibre) is used for brush fiber.We can offer from 7cm to 25cm.