Anyang Forging Press Industry Co., Ltd has a history of more than 25 years experience in producing hydraulic baling press for metal scrap. Our company has advanced technique and accurate equipments and excellent technical engineers and convenient environment of design and production. Our company has passed the ISO90001 Certification. We are the second grade unit of measurement. Y81 series hydraulic metal baling press is mainly used in compressing the scattered plastic ferrous metal and non-ferrous metal plates and wire rod to certain form block under cold state. It is very convenient to the transportation and smelting. As the manufacturer of first set metal baling press and the only one committing the quality quaranty to clients, we have adhered to the principle Quality First, Clients paramountcy through decades years. Meanwhile, we have established perfect and strict quality inspection system, and every product is tested carefully and inspected strictly and its eligibility rate is 100% before leaving factory. Till now, We have exported our hydraulic metal baling press and other products to USA, Canada, UK, Germany, Italy, Czech Republic, Australia, Norway, Indonesia, Myanmar 56 Countries etc. We have very good reputation among the custive price.

Application: Sand washing machine is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservation and hydropower, cement mixture station and so on. Working Principle: Driven by electric motor and decelerator, the impeller of sand washing machine moves in a circle in the water groove, thus make the sand or slag pellets mixed, overturned, cleaned and discharged in the water groove Features 1. It is of simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things. 2. Being used for cleaning sand in quarries, it has many advantages compared with traditional spiral sand washing machine: There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. It has longer service life and little maintenance chance.

(IPL+RF) rejuvenation & hair removal machine Transportation: Express, Air Transportation Portable: No Product Description IPL has certificates of Medical CE, etc. All IPL machinery can be compatible in the these aspects, (1)Machine hand piece(treatment head) (2)Sapphire filters (3)LCD operating windows, it contains common LCD window and Colorful cartoon LCD window. Advantage: Spot size: 10*40mm for treatment to different part of body. One hand piece with several changeable filters with multifunction Sapphire filter for excellent cooling for better treatment and protection Logical software with 3 kinds of languages, color touch screen Two attactive touch screen (Q2000) style with CE certificated. Three treatment heads has the following fuction: The function: 1) Hair removal 2) Acne clearance 3) Skin rejuvenation 4) Pigmentation treatment 5) Vascular treatment. 6)Shrink Pores,tightn skin, improve skin elasticity and glossiness. 7)Eliminate and smooth wrinkles, ance treatment Spectrum range: 520-1200nm(take the spot) 620-1200nm(remove hair) Option: 420-1200nm; 560-1200nm; 690nm-1200nm; Energy density: 10-50J/cm2 Pulse method: Intense pulsed technology (can adjust) Pulse sequence: 1, 2, 3, 4, 5 pulse Pulse intermission: 5-60ms Pulse width: 2-15ms Repeat frequency: 0.3-1Hz Delivery: Sapphire Coupling Light spot: 10*40mm2 Cooling system: Water cooling, forced-air cooling and Semi-conductor cooling Cooling temperature: -4 - 0 degree Power supply: 220V/50Hz or 110v/60Hz Size: 52*58*12cm3 Net Weight: 40kg Last but not the least: One-year warranty and lifelong technical service leave you no worry at all! Model: Q2000 Standard: Medical CE, ISO13485, and SFDA Productivity: 3500 pieces/year Unit Price/Payment: T/T, Western Union Trademark: Qunhao

IPL Treatment Instrument Packing: Aluminium Box. Standard: CE Productivity: 500sets/month Unit Price/Payment: T/T, Western Union HS Code: 90189090 Trademark: Qunhao Origin: Guangzhou, China Min. Order: 1set Transportation: Express, Air Transportation Portable: No Product Description (IPL+RF) machine has certificates of Medical CE, etc. All IPL machinery can be compatible in the these aspects, (1)Machine hand piece(treatment head) (2)Sapphire filters (3)Control,it contains touch control and button control. (4)LCD operating windows, it contains common LCD window and Colorful cartoon LCD window. Advantage: Spot size: 10*40mm for treatment to different part of body. One hand piece with several changeable filters with multifunction Sapphire filter for excellent cooling for better treatment and protection color touch screen/button screen for choose

We can produce forged pipe fittings in different grades, sizes and class according to DIN, SMS, ISO, 3A, RJT, IDF standards. These forged pipe fittings are used in the surroundings requiring high pressure, such as petrochemical, transportation, gas, mining industry, and so on. Our high pressure forged pipe fittings have the following features: Long service life Corrosion resistance Dimensionally accurate Leak proof Smooth finish Specifications: Grades: Carbon Steel and Stainless Steel

Synonym Name: 3-Chloro-1,2-epoxypropane, ECH Formular: CH2OCHCH2Cl Molecular Weight: 92.8 Cas NO.: 106-89-85 UN NO.: 2023 Basic Properity: easy to volatilize, and unstable colorless liquid, has similar irritant smell with chloroformand ether. In the water, it can sparing soluble in organic solvents, and may appear azeotropy with many kinds of organic liquid. Physical Property: Density: 1.1806g/cm3, Boiling point: 116.11℃, Solidification point: -57.2℃, Refractive index （nd20）: 1.4382, Flash point: 40.6℃, Self-ignition point: 415℃ Specification: Test Specification Epichlorohydrine 99.5% Min Color (Pt-Co) 15 Max Moisture 0.1%Max Density(20℃) 1.180~1.183 Main Application： It is one kind of important organic industrial chemicals and the fine chemical industry, mainly used in producing epoxy resin, medicines intermediates, synthetic glycerine, chlorohydrin rubber, nitroglycerine, glass fiber reinforced plastic, electric insulation product, etc, and used in the rubber industry as a solvent. Toxicity and protection：Violently poisonous, may absored by skin, stimulate the skin and the mucous membrane. The production equipment must be airtight, the air must circulate, the operators must wear protect apparatus. Packing and storage and transportation ：packed in clean galvanization iron drum. Store in cool, well ventilated, dry place, must be far away from the fire hazard and the heat source. According to flammable virulent goods stipulation storage and transportation.

Freight Elevator A freight elevator, a type of heavy duty elevator, is also called a goods elevator. It is a low speed elevator, and is specially used to move goods between floors of a building. T5-E Freight Elevator We are a reliable freight elevator manufacturer in China. Our T5-E goods elevator is designed for customers who look for a high-quality and cost-effective elevator. This freight elevator is built tough to stand up against heavy use for years. Based on T5, it is an economical product of utility with modification in some configurations. T5-E Main Configurations AC two-speed driving system Microcomputer merged control Resistance type timing door machine Door infrared ray photoelectricity inductor Standard Specification of T5-E Freight Elevator Load(Kg) 1000, 1600, 2000, 3000, 4000, 5000 Speed(m/s) 0.25, 0.5 Most Stops 15 Max. Journey 60m T5 Freight Elevator Our T5 freight elevator is of high configurations and complete functions, and is built with dependable quality to last a lifetime. We invite you to compare this goods elevator to any competitor, and you will find it superior in design and quality. T5 Main Configurations Internationally advanced AC frequency conversion and transformation driving system Powerful Wellift modular intelligent control system with serial communication information processing, to realize remote monitoring and management Stable and reliable frequency conversion and transformation timing door machine system Safe and smart door infrared ray curtain safety protection device Solid box structure, well-chosen gilded material and durable calling landing parts Standard Specification of T5 Freight Elevator Load(Kg) 1000, 1600, 2000, 3000, 4000, 5000 Speed(m/s) 0.25, 0.5, 1.0 Most Stops 15 Max. Journey 60m Standard Design 1. C-01 Standard car 2. D-01 Standard narrow door frame, Auto folding side opening door 3. D-02 Standard wide door frame, Center opening two-panel sliding door 4. CB-S Integrated control panel 5. DB-S External call box As an experienced goods elevator manufacturer and supplier, Wellift Elevator Company has received ISO9001:2000 certificate. Located in Xiamen, Fujian, we enjoy convenient transportation by land, sea, and air. So we can deliver our elevators quickly and cheaply. Our primary products include freight elevators, observation elevators, home elevators, and escalators. They have the advantage of reliable quality, great durability and high performance. Please contact us for more product information. We are looking forward to serving you.

We can produce and supply to you various steel pipes according to international standard. Hot dip galvanized steel pipes are used in the following fields, steel structure, build structure, transportation of low pression liquid and gas etc. our products are exported to about 50 countries in the world, we get a lot of recognition from many customers since our good quality and service. Production standard: and in wall thickness as shown in Table 1. GB/T 3091-2001, BS1387 / 1995(UK),BS4568:1970,DIN 2440/2448, ASTM A53 Material:SPHC,SPHD,SPHE,Q195-Q235,SAE1006 Size: OD (6-610 mm) x WT (1-50mm) GTC (galvanized threaded and coupling) steel pipe: DN15-DN200 (NB1/2"-NB8") GPE (galvanized plain end) steel pipe: DN15-DN200 Grooved steel pipe: DN15-DN200 (NB1/2"-NB8") Section type: round, square, rectangular, oval and other special section type. Pre-galvanized steel pipeEnlarged View... HSS (Hollow Structural Steel) Enlarged View... Cold rolling - to 8" x 8", 12" x 4" (easy way), 8" x 6" (hard way) Draw bending - to 4" x 4" (easy and hard way) Cold bending - to 8" x 8" Mill Test Certificate: EN 10204/3.1B Third party inspection: SGS, BV, Lloyds etc.

ERW pipes means Electric Resistance Welded Pipes. ERW steel pipes and tubes are used in various engineering purposes, fencing, scaffolding, line pipes etc. ERW steel pipes and tube are available in various qualities, wall thicknesses, and diameters of the finished pipes. Size:(ERW, HFI, EFW) and in wall thickness as shown in Table 1. but we can also produce other specification according to the customers' requirements. Outer Diameter: 6mm-610mm (1/16"-24") Wall Thickness: 0.3mm-22mm Length: 0.5mtr-20mtr ERW line pipe -- for the transportation of oil, natural gas and chemical materials Standards: AP-5L PSL1/ PSL2 GB/T9711.1-1997 GB/T9711.2-1999

ERW HFI , EFW, LSAW, DSAW: GB/T3091 Welded steel pipe for low pressure liquid delivery GB/T9711 Petroleum and natural gas industries--Steel pipe for pipelines IS: 3589 Steel tubes for water and sewage IS : 1978-1982 Steel tubes for use in transportation of oil; gas & Petroleum products BS: 1387 Steel Tubes for use for Water, Gas, Air and Steam ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless DIN 2458 WELDED STEEL PIPES AND TUBES EN10217 Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties API 5L Line Pipe SAW SSAW: SY/T5037 Spiral submerged arc-welded steel pipe for pipelines for low pressure field fluid service SY/T 5040 Spiral submerged arc-welded steel pipe piles CJ/T 3022 Spiral submerged-arc welded steel pipe for municipal heat supply IS : 1978 Steel tubes for use in transportation of oil; gas & Petroleum products ASTM A252 WELDEDAND SEAMLESS STEEL PIPE PILES Coating Standard: ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ISO 21809 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems DIN 30670 Polyethylen coatings of steel pipes and fittings

Production Standard, Grade, Steel No: ASTM A106 Grade A, B, C ASTM A53 Grade A, B GB/T8163 10, 20, Q295, Q345 Delivery Condition:Annealed, Normalized Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness), Surface and Dimension Test,No-destructive Test, Hydrostatic Test. Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.

We can makes and markets cold-drawn and hot rolled seamless steel pipes and cold-drawn special-section seamless pipes which are widely applied in the industries of petrochemical, boiler, automobile, mechanical, construction, chain, electric of the company is 80000t. Our factories through ISO9001:2000 certificate, has aggressive leadships and outstanding professionals. Specifications: Standard: ASTM A106, A53, API 5L GR.B, DIN2448, DIN1629, DIN17175, EN10255 Grade: X42, X52, GR.B, ST37, ST44, ST52, S355JR Size: From 1/2" to 32" Wall Thickness: 2mm-30mm but we can also produce other specification according to the customers requirements. Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting. Ends: Beveled or square cut, Plastic capped. The pipes also can be 3PE or FBE or Galv. coated. Certification: ISO, API, ASTM, DIN etc. Third party inspection: SGS, BV, Lloyds etc Application: Oil and Gas Pipeline , Structural Pipe, Plumbing , Heating ,Water Supply Systems ,General purpose applications

The Concrete Pump Pipe is made of special quality steel which is quenched and carried out carburizing chemical treatment on the inner wall. The hardness of the flanged bushings can reach 58-60 degrees and the serving life of pipeline can increase 3-5 times,which enables users to save time and cost, enhancing the production efficiency. Material: High Manganese casted such as ST52, 37Mn5, 45Mn2 Size: Dia. 133, dia 140, dia. 159, dia 168 Wall Thickness: 2mm to 10mm or more Series: 125 and 150 Length: 1m, 2m, 3m or according to the customer's requirement Working Capacity: 25000-35000cbm Application: Used for the concrete transportation in construction work Standard: ISO, ANSI, GB Application: Used for the concrete transportation in construction work

Wear Resistant Pipe and Elbow for Pneumatic Conveying Tubes and bends in pneumatic conveying lines are suffering more or less abrasion. SunnySteel's ceramic lined pipes resists abrasion and avoids product attrition.It reduces considerabley degradation of conveyed material and avoids formation of angel hair through its patented deflection chamber.The compact design reduces cost of pipe support and installation. It is automatically self-purging with little pressure drop. Ceramic Lined Elbows and Bends could be also applied in the parts of concrete pump owing to their advantages especially the low weight which helps to avoid the jam during the transport of concrete. Features of Alumina Ceramic: Alumina is a cost effective and widely used material in the family of engineered ceramics. Alumina ceramics have been developed and optimized for maximum wear resistance and corrosion resistance. A high density, diamond like hardness,fine grain structure and superior mechanical strength are the unique properties that make it the material of choice for a wide range of demanding applications.Ceramic has uses similar to Cast Basalt but it has greater resistance to wear in high velocity applications and impact resistance in extreme dynamic systems . Main Properties of Ceramic Item Index Content of Alumina ≥95% Density ≥3.5 g/cm3 Rockwell Hardness ≥80 HRA Impact Strength ≥850 Mpa Bending Strength ≥290MPa Breaking Temper ≥4.8MPa·m1/2 Coefficient of Linear Thermal Expansion 20W/m.K Due to the above properties of Alumina Ceramic,Ceramic Lined Pipe Elbows have the following superiorities. Low friction factor of Ceramic at low impingement angles decreases the abrasion of materials maximally. Ceramic-lined composite steel pipe can take place of expensive stainless steel, nickel, cast stone or alloy pipes. And extended service life can also reduce maintenance cost. Preventing operation cease caused by frequent replacement of pipes and elbows . Excellent thermal resistance and abrasion resistance by ceramic material processing. Distinguished adhesive strength by high-temperature bonding agent. 10~20 times longer life span than products processed with SS, etc. No substance intermixed by abrasion during transportation. Low density makes the wear resistant pipe elbow easy to carry and install.

SHS (Self-propagating High-temperature Synthetic process) ceramic lined steel pipe and elbow create a new generation of abrasion and corrosion resistant engineering pipeline.The composite steel pipe is composed of three layers: ceramic, intermediate, and steel layers. The ceramic layer is formed by molten alumina at a temperature above 2500 degree. The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the ceramic layer has high density and smooth surface and bonds to the steel pipe. Abrasion Resistant Ceramic Lined Pipes have been uniformly produced by a thermite reaction induced under the influence of a centrifugal force ("Centrifugal Thermite Process") without any high-temperature furnace facilities. The characteristic feature of the present process for forming uniform ceramic layers is in its reaction propagation as well as the reaction heat and centrifugal force. It is very important in improving the quality of the ceramic lined pipes to find the proper conditions of the reactant and centrifugal force; the former mainly determines the produced ceramic layer quality and the latter the achievement of layer separation and the mechanical properties of the pipes. Ceramic lined tube has great resistance against corrosion, abrasion and thermal shock. Features and Advantages: 1). High Abrasion Resistant: Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel pipes. The composite ceramic lined steel elbow was used in a mining plant for about fifty thousands hours. The general service life of common steel elbow is about 700 hours. 2). Corrosion Resistant: Corundum is a neutral material, and is acid-proof and fouling -free. 3). Heat Resistant: Ceramic lined composite steel pipe can work under circumstances of -50 to 800 Celsius degree . 4). Lower Weight and Convenient Installation: The ceramic lined steel pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes and can be welded or connected through flanges, which reduces the expense of transportation and makes the pipes easier to install. For the pipes with the same sizes, types and length, the weight of ceramic pipe is about 1/2 of the wearable cast alloy steel pipe's, while the cost has reduced 10%~20% per meter. The weight of ceramic lined steel pipe is about 1/3 of the cast stone bent pipe's, 1/2 of the cast stone straight pipe's. 5). Lower Cost : Ceramic lined pipes can take place of expensive stainless steel, titanium, nickel, cast stone or alloy pipes. Extended service life can also reduce maintenance cost. Specifications: Tube diameters:50 to 1020mm Elbow angle: 22.5, 45, 60, 90, 120, 135, 150 degrees, etc. Three way pipes: Y shaped, Y lateral and other special shapes Four way pipes: straight cross, reducing cross. Ceramic lining thickness (including transition layer): 3 to 8mm

Packing Aluminium Box. Standard CE Unit Price/Payment T/T, Western Union HS Code 90189090 Trademark Qunhao Origin Guangzhou, China Min. Order 1set Transportation Express, Air Transportation Portable No /Equipped with super tiny nm (nanometer) carbon penetrated skin,carbon laser can accelerate collagen albumen reorganization,meanwhile,t his kind of technology can remove extra fat and recover elasticity,shrink pores and skin-tightening. /Long pulse laser get obvious treatment result. /Safety and non -invasion,no bleeding,no pain,no adverse reaction and side effect. /Simple&No Training . The range of treatment: /Promote facial tendering and whitening. /liminate or lightening telangiectasia. /Clean our lightening pigment spot. /Amend tiny veins,enhance skin elasticity. /Shrink pores. /Remove blackhead. Technical Parameters: /Laser source:Nd:YAG /Laser type: Q switch :1064NM&532NM /Maximum output laser energy: 1000MJ /laser pulsed width(Q switch):<=10MS /Spot diameter:8mm /Input power:500W /light guide mode:Hand-handle laser gun /Power supply:AC220V 10%,5A,50Hz (Or 110V,50/60Hz) Also we gurantee Long continuous work time, stable function, short period of treatment, easy operation, no down time, delivery in time without delay, more color selection, the most important, we are strongly responsible for the after sale service, if you are interested in our products, don't hesitate to contact us with your detailed infomation.

We can makes and markets cold-drawn and hot rolled seamless steel pipes and cold-drawn special-section seamless pipes which are widely applied in the industries of petrochemical, boiler, automobile, mechanical, construction, chain, electric of the company is 80000t. Our factories through ISO9001:2000 certificate, has aggressive leadships and outstanding professionals. Specifications: Standard: ASTM A106, A53, API 5L GR.B, DIN2448, DIN1629, DIN17175, EN10255 Grade: X42, X52, GR.B, ST37, ST44, ST52, S355JR Size: From 1/2" to 32" Wall Thickness: 2mm-30mm but we can also produce other specification according to the customers requirements. Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting. Ends: Beveled or square cut, Plastic capped. The pipes also can be 3PE or FBE or Galv. coated. Certification: ISO, API, ASTM, DIN etc. Third party inspection: SGS, BV, Lloyds etc Application: Oil and Gas Pipeline , Structural Pipe, Plumbing , Heating ,Water Supply Systems ,General purpose applications

The Concrete Pump Pipe is made of special quality steel which is quenched and carried out carburizing chemical treatment on the inner wall. The hardness of the flanged bushings can reach 58-60 degrees and the serving life of pipeline can increase 3-5 times,which enables users to save time and cost, enhancing the production efficiency. Material: High Manganese casted such as ST52, 37Mn5, 45Mn2 Size: Dia. 133, dia 140, dia. 159, dia 168 Wall Thickness: 2mm to 10mm or more Series: 125 and 150 Length: 1m, 2m, 3m or according to the customer's requirement Working Capacity: 25000-35000cbm Application: Used for the concrete transportation in construction work Standard: ISO, ANSI, GB Application: Used for the concrete transportation in construction work

PP Cement Jumbo Bags is a kind of flexible transport containers with PP and PE materials. It is used for packing the bagged cement. Characteristics: dustproof, moisture-proof, radiation-resistant, safety, fastness,etc. All customer design is available. Cement Jumbo Bag with open top and flat bottom, used for holding 25kg/40kg/50kg small bags, reduce transportation cost and make the transportation covenient and swift. Specification 1. Capacity: 1ton, 1.5ton,2 ton or as per customer’s requirement 2. Materials: PP woven coated fabric, bran-new, gram weight 165-220g/m2 3. Colour: white or beige 4. Safety factor: 3:1, 5:1 or 6:1 or as customer’s request 5. Print: double sides with one colours or double sides with two colours, or according to customer’s request 6. Document pocket: A4 document pocket , could add if customer need 7. Waterproof: add a inner liner PE bag to waterproof if the customer need. 8. Moistureproof: all the cement bag should be PE coated to moistureproof. Anhui Goodmax Packing Materials Co.,ltd TEL: +0086-27-8574 9266 FAX: +0086-27-8574 2085 EMAIL: sales@goodmaxpacking.com http://www.goodmaxpacking.com

Welded Wire Mesh Machine Welded wire mesh machines produced wire mesh products, welded wire mesh manufactured products, will be widely used in industry, agriculture, aquaculture, construction, transportation, mining and so on. Such as machine protective cover, animal livestock fence, flowers and trees fences, security window bars, channel fences, poultry cages, egg baskets and the food baskets for home office, basket and decorative. The main products are: small and medium-sized welded wire mesh machine

Hot Dipped Galv. Welded Mesh Hot Dipped Galv. Welded Mesh Applications: Welded wire mesh is used in industry, agriculture, building, transportation, mining, fishing, poultry, egg baskets, runway enclosures, draining rack, fruit drying screen, fence etc.

Contact person:lily Email:lfywo@yahoo.com.cn Tel:+86-023-68681153 Mobile:+86-15909333942 msn:oil purifier lily2010@live.cn skype:sweetlily20101 FAX:0086-23-68060921 Application: Series TYA waste lubricating oil recycling machine is mainly for purifying unqualified lubricating oil, hydraulic oil, compressor oil, refrigeration oil and other industrial oils, this machine can rapidly separate water, gas, particles and volatile matter (such as alcohol, gasoline, ammonia, etc.) from oil, restoring oil viscosity, flash point and performance. The treated oil can reuse again in various industrial equipments. It is widely applied in petroleum, chemical, mining, metallurgy, electric power, transportation, machinery manufacturing, railway etc. Features: 1. Double primary-filter structure, large capacity for holding particles, Multi-stage filtration system to ensure high filtration precision. 2. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles 3. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 4.Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 5. Rapid speed for dewatering, degasify and removing impurities from waste high viscosity lube oil used for lubricating equipments, and after treatment, the treated oil can reach to cleanness NAS 6. 6. Adopt advanced technology for combination of coalescing separation and vacuum dewatering, to get the high precise of water and gas content. 7. Newly developed auto double-infrared fluid level control system, replace of manual or floating ball valve control, to ensure operation safety of this model. 8. Automatic back-flushing system, can clean the filters by the machine itself, to timely maintain the filters and extend its service life. 9. Carbon fiber infrared heating system not only can heat the oil equably and rapidly, but also a environment-friendly way for oil heating. This waste lubricating oil recycling machine TYA adopts the international advanced neon-molecular materials broken emulsion technology, that can make the lubricating oil with low emulsification value, few water content and very little impurities with high precision, so that the oil is good enough to be re-used repeatedly on high-precision hydraulic lubricating equipment at home and abroad.

Contact person:lily Email:lfywo@yahoo.com.cn Tel:+86-023-68681153 Mobile:+86-15909333942 msn:oil purifier lily2010@live.cn skype:sweetlily20101 fax:+0086-23-68060921 Use: Waste engine oil recycling machine LYE is particularly suitable to purify and regenerate used internal-combustion engine oils including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery's lubrication oil. LYE Recycling series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. After treated by the machines, the color of treated oil looks like the new one, the quality indexes are improved also, so as to resume the performance of engine oil , keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. Feature: 1. Design according to different customers' needs including Turnkey Project. 2. Purify blended oils. 3. Low operation cost. 4. High regeneration rate. 5. Automatic reverse washing system will extend the lifetime and improve the performance of the filters. 6.High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely. 7. Two main filtering systems in the LYE which can ensure the LYE works continuously by batch. 8.Making the color of the treated oil be recovered similar as new one. 9. Munually/ automatically removing residual impurities from the machine, which is easy to operate and on the safeside. 10. The mixture of gases drawn out via vacuum system is condensed and dewatered by forced air, which improves the effective output power of the machine and prolongs the service life of vacuum pump. Advantage: This waste engine oil recycling machine LYE can fast degas, dewater, and remove the impurity and the volatile mater(for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restore the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation. So the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Regenerating the used hydraulic oil, lubricating oil, coolant oil, machine oil and so on.

This unit uses LLDPE as main material and adopts several kinds of resins to manufacture the single/double-side self-sticky stretch wrapping film. The film has good tensile strength,anti-pricking ability and impact strength. Its good shrinking memory function and self-sticky can make goods integrity to prevent goods from loosening and collapsing during transportation and being polluted by dust. The transparency and tensile strength of this product can make the packaging beautiful, economical and practical. The film can be widely used in wrapping of palletized goods. It’s a good substitute for hot shrinking packaging film during transportation.

Name: Thiourea Dioxide Appearance and Odour: White crystal powder, odour less Formula: (NH2)2CSO2 Molecular weight : 108.12 Melting Point: 126Deg.C PH: 4(1%Solution) CAS No.: 1758-73-2 UN NO.: 3341 Dangerous Goods Class: 4.2 Specific Gravity:1.68 Purity: 99.0% Min. Remain Thiourea: 0.1% Max Moisture: 0.05% Max Iron(Fe): 10ppm Max. Sulphate: 0.17% Max. Uses: It can be used as exchange of sodium hydrosulfite. The product has good heat stability, high as reducibility, easy operation and transportation and storage convenient and then used to organic synthes is in synthetic fiber industry, also used as additive of polythene sensitizer of photographical emulsion and so on. It is also used as reducing agent in printing and dyeing industry and used as pulp bleaching or de-inking of recycled fibers in the paper industry. There is no pollution during the operation. Packing 1)500kg and 1000kg Containning bags 2)100kg or 160kg drums 3)50kg fiber drums 4)25kg or 50kg plastic bags inner two layers 5) 25kg kraft paper compound plastic bag Contact method: Contact person: Kelly Company:Weifang Huajin International Trading Co.,Ltd Address: No.98 Siping road, Weifang, Shandong, China Tel: 0086-536-2222998 Fax: 0086-536-8298296 Mobile: 0086-15169646600 Email: wfhuajin@gmail.com Website: http://wfhunjin.en.china.cn Msn: kellywang317@hotmail.com

Specifications and Advantages Six foot high security fencing Attractive and sturdy barricade fence panels Ideal for construction sites, outdoor events, parking lots and crowd control. Fence Panel Specifications 7.5 feel (length) x 6 feet (height) 2 inch by 4 inch welded wire mesh Galvanized after welding Advantages Easy setup and transportation saves time and labor costs Inside diameter weld ensures no edges to get hung up while loading, unloading and handling. no sharp edges, fencing panels are easy to install and transport Attractive and sturdy fence panels Durable construction can withstand years of abuse in outdoor settings Bright, reflective colors stand out in day or night

Material: collect high-quality low carbon steel wire and stainless steel wire welded together Weaving and Technology: hot-dipped galvanized after welding,hot-dipped galvanized before welding, electro galvanized after welding,electro galvanized before welding, PVC coated,welded mesh,welded mesh made of stainless steel Characteristics: strong anti-corrosion , anti-oxidant and so on. Uses: widely used in industry, agriculture, construction, transportation, mining, golf course, lawn, aquaculture and other sectors of the fence, decoration, machine protection, and so on. Specifications for your reference as follows: Mesh Wire Gauge. Assortments available: Hot-dipped galvanized after welding; Hot-dipped galvanized before welding; Electro galvanized after welding; Electro galvanized before welding; Welded mesh, PVC-coated; Welded mesh made of stainless steel. 1/4"X1/4" BWG23 3/8"X3/8" BWG19,20,21,22 1/2"X1/2" BWG16,17,18,19,20,21,22,23,24 3/4"X3/4" BWG16,17,18,19,20,21,22 1"X1/2" BWG16,17,18,19 1"X1" BWG14,15,16,17,18,19,20,21 1"X2" BWG14,15,16 2"X2" BWG14,15,16,18

Ceramic Lined Elbows and Bends could be also applied in the parts of concrete pump owing to their advantages especially the low weight which helps to avoid the jam during the transport of concrete. Features of Alumina Ceramic： Alumina is a cost effective and widely used material in the family of engineered ceramics. Alumina ceramics have been developed and optimized for maximum wear resistance and corrosion resistance. A high density, diamond like hardness,fine grain structure and superior mechanical strength are the unique properties that make it the material of choice for a wide range of demanding applications.Ceramic has uses similar to Cast Basalt but it has greater resistance to wear in high velocity applications and impact resistance in extreme dynamic systems . Main Properties of Ceramic Item Index Content of Alumina ≥95% Density ≥3.5 g/cm3 Rockwell Hardness ≥80 HRA Impact Strength ≥850 Mpa Bending Strength ≥290MPa Breaking Temper ≥4.8MPa·m1/2 Coefficient of Linear Thermal Expansion 20W/m.K Due to the above properties of Alumina Ceramic,Ceramic Lined Pipe has the following superiorities. Low friction factor of Ceramic at low impingement angles decreases the abrasion of materials maximally. Ceramic-lined composite steel pipe can take place of expensive stainless steel, nickel, cast stone or alloy pipes.And extended service life can also reduce maintenance cost. Preventing operation cease caused by frequent replacement of pipes and elbows . Excellent thermal resistance and abrasion resistance by ceramic material processing. Distinguished adhesive strength by high-temperature bonding agent. 10~20 times longer life span than products processed with SS, etc. No substance intermixed by abrasion during transportation. Low density makes it easy to carry and install.

Ceramic Lined Elbows and Bends could be also applied in the parts of concrete pump owing to their advantages especially the low weight which helps to avoid the jam during the transport of concrete. Features of Alumina Ceramic： Alumina is a cost effective and widely used material in the family of engineered ceramics. Alumina ceramics have been developed and optimized for maximum wear resistance and corrosion resistance. A high density, diamond like hardness,fine grain structure and superior mechanical strength are the unique properties that make it the material of choice for a wide range of demanding applications.Ceramic has uses similar to Cast Basalt but it has greater resistance to wear in high velocity applications and impact resistance in extreme dynamic systems . Main Properties of Ceramic Item Index Content of Alumina ≥95% Density ≥3.5 g/cm3 Rockwell Hardness ≥80 HRA Impact Strength ≥850 Mpa Bending Strength ≥290MPa Breaking Temper ≥4.8MPa·m1/2 Coefficient of Linear Thermal Expansion 20W/m.K Due to the above properties of Alumina Ceramic,Ceramic Lined Pipe has the following superiorities. Low friction factor of Ceramic at low impingement angles decreases the abrasion of materials maximally. Ceramic-lined composite steel pipe can take place of expensive stainless steel, nickel, cast stone or alloy pipes.And extended service life can also reduce maintenance cost. Preventing operation cease caused by frequent replacement of pipes and elbows . Excellent thermal resistance and abrasion resistance by ceramic material processing. Distinguished adhesive strength by high-temperature bonding agent. 10~20 times longer life span than products processed with SS, etc. No substance intermixed by abrasion during transportation. Low density makes it easy to carry and install.

1. PVC Coated Wire is made of Black Iron Wire, Black Annealed Wire, Galvanized Wire, or Stainless Steel Wire with PVC or PE coated layer. It is an ideal metal wire for fixing wire supports, straining wires and clotheslines, etc. 2. Materials: PVC Plastics, Black Iron Wire, Black Anneal Wire, Galvanized Iron Wire, Stainless Steel Wire, 4. Features ? Package easy for transportation and production ? Continuous coil in one wire with no ties ? Standard or heavy galvanized core wire to rustproof ? PVC coated for double protection for corrosion resistance ? Uniform coating and good luster ? Low cost, resilient, strong adhesion and high flexibility ? Fire retardant and good insulating properties ? More colors on option 5. Colors: Common colors available for PVC Coated Wire are green and black. Other variety of colors like blue, yellow, orange, gray, red also are available at customer’s requirements. 6. Applications: The most popular use for PVC Coated Wire is extensively used for daily life making in Chain Link Fence for industrial security fences, animal cultivation, stadium, freeways and tennis courts. It is also used as coat hangers and handles.

Contact:tracy Email:oilpurifier.tracy@yahoo.com Hotmail: oilpurifier.tracy@hotmail.com Gmail:oilpurifier.tracy@gmail.com Aolmail:tracy860520@aol.com MSN：oilpurifier8888@live.cn Skype:tracyhuang850 Mobile Phone: 86-13627601268 I. Range of Application LYE used engine oil regeneration system is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, cooling oil etc are used. Gas/Diesel engine oil used in the field of transportation like shipping, land-carriage etc. also can be treated with regeneration by LYE series machines. II. Product description LYE series oil regeneration system mainly treats and regenerates used engine oil and waster motor oil from car, motor, truck, ship, mines, electrical power and so on. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas/diesel engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas/diesel engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas/diesel engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource. III. Features 1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil. 2. Completely removing water and harmful gas from the waste oil. 3. Recovering the color of the treated oil as fresh oil 4. Simple operation, safe and reliable. 5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements. 6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract. 7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc. IV. The machine is composed of following systems: ①. Reaction system (reactor, blender, oil pump); ②. Heating system (heater, circulation oil pump, heat exchanger); ③. Filtering system (filtering equipment body, strainer sheet, moving-start equipment lock-down equipment) ④. Exhaust gas processing system (gas exhausting machine, radiator, cooler, water container, exhaust gas processor, exhaust gas filtration) ⑤. Electrical control system. Main Products: 1. Insulating oil purifier 1.1. Series ZY: Zhongneng vacuum insulation oil purifier 1.2. Series ZY-A: Zhongneng Vacuum insulation oil automation purifier 1.3. Series ZY-R: Zhongneng vacuum insulation oil regeneration purifier 1.4. Series ZYD: Zhongneng Double-stage vacuum insulation oil purifier Contact:tracy 1.5. Series ZYD-A: Zhongneng double-stage vacuum insulation oil automation purifier 1.6. Series ZYD-R: Zhongneng double-stage vacuum insulation oil regeneration purifier 1.7. Series ZYD-M: Zhongneng Mobile Type Transformer Oil Purification Plant, Oil Recycling 2. Turbine oil purifier 2.1. Series TY: Zhongneng vacuum turbine oil purifier 2.2. Series TY-R: Zhongneng vacuum turbine oil regeneration purifier 2.3. Series TY-A: Zhongneng vacuum turbine oil automation purifier 3.Lubricating oil purifier 3.1. Series TYA: Zhongneng vacuum lubricating oil purifier 3.2. Series TYA-A : Zhongneng vacuum lubrication oil automation purifier 3.3. Series TYC: Zhongneng vacuum lubricating oil regeneration purifier 4. Engine oil purifier Series LYE: Zhongneng vacuum engine oil purifier 5. Diesel oil, gasoline oil and fuel oil purifier Series TYB: Zhongneng diesel oil, gasoline oil and fuel oil purifier 6. Transformer oil regeneration device Series BZ: Zhongneng BZ transformer oil regeneration device 7. Muti-Functional oil purifying machine Series ZYB: Zhongneng Muti-Functional oil purifying machine 8. PL Plate pressure oil purifier 9. JL Portable oil purifying 10. TYD Water oil separator, oil purifier machine 11. Automatic testing oil machine

Contact:tracy Email:oilpurifier.tracy@yahoo.com Hotmail: oilpurifier.tracy@hotmail.com Gmail:oilpurifier.tracy@gmail.com Aolmail:tracy860520@aol.com MSN：oilpurifier8888@live.cn Skype:tracyhuang850 Mobile Phone: 86-13627601268 Application Series TYA-A is special for purifying all kinds of lubricating oil such as the Engine oil, hydraulic oil, mechanical oil, vegetable oil, coolant oil, gear oil, compressor oil, heat treatment oil, cooking oil, and so on. This machine can operate automatically (don’t need the person when it is working). Features 1. Strong capability of breaking emulsification. 2. The combination of coalescing separation and vacuum dewatering. 3. More Deeply and precisely FH rectangle filtering system. The oil will reach to the new oil’s nature when it was purified. 4. Zhongneng’s unique technology with H.P.M high molecule absorption material. 5. The automatic system of advance infrared liquid-level, the automatic safeguard system of pressure, and the automatic system of temperature constancy the automatic safeguard system of electricity Operation is simple, safe and reliable. Advantages Hydraulic lubricating oil treated by this machine contains so low emulsification value, few water content and impurities that it can be used repeatedly in the highly precise hydraulic lubricating equipment at home and abroad. This series can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Main Products: 1. Insulating oil purifier 1.1. Series ZY: Zhongneng vacuum insulation oil purifier 1.2. Series ZY-A: Zhongneng Vacuum insulation oil automation purifier 1.3. Series ZY-R: Zhongneng vacuum insulation oil regeneration purifier 1.4. Series ZYD: Zhongneng Double-stage vacuum insulation oil purifier Contact:tracy 1.5. Series ZYD-A: Zhongneng double-stage vacuum insulation oil automation purifier 1.6. Series ZYD-R: Zhongneng double-stage vacuum insulation oil regeneration purifier 1.7. Series ZYD-M: Zhongneng Mobile Type Transformer Oil Purification Plant, Oil Recycling 2. Turbine oil purifier 2.1. Series TY: Zhongneng vacuum turbine oil purifier 2.2. Series TY-R: Zhongneng vacuum turbine oil regeneration purifier 2.3. Series TY-A: Zhongneng vacuum turbine oil automation purifier 3.Lubricating oil purifier 3.1. Series TYA: Zhongneng vacuum lubricating oil purifier 3.2. Series TYA-A : Zhongneng vacuum lubrication oil automation purifier 3.3. Series TYC: Zhongneng vacuum lubricating oil regeneration purifier 4. Engine oil purifier Series LYE: Zhongneng vacuum engine oil purifier 5. Diesel oil, gasoline oil and fuel oil purifier Series TYB: Zhongneng diesel oil, gasoline oil and fuel oil purifier 6. Transformer oil regeneration device Series BZ: Zhongneng BZ transformer oil regeneration device 7. Muti-Functional oil purifying machine Series ZYB: Zhongneng Muti-Functional oil purifying machine 8. PL Plate pressure oil purifier 9. JL Portable oil purifying 10. TYD Water oil separator, oil purifier machine 11. Automatic testing oil machine

Stainless Steel Welded Wire Mesh PVC Coat Welded Wire Mesh Material: Hot Dip Gal./Electro Gal./Black Iron/S.S Wire/or with PVC coat. Features: Welded wire mesh is made of high quality iron/S.S wire through automatic process and sophisticated welding technique. Laid horizontally and vertically. The finished products are level and flat with sturdy structure. It has well erosion-resisting and rustproof properties. Applications: Welded wire mesh is used in industry and agriculture building, transportation, mining, fishing, poultry, egg baskets, runway enclosures, draining rack, fruit drying screen, fence etc. Width: 0.9M-2.0M Length: 30M-60M Procedure: Hot Dip Gal./Electro Gal. after/before welding Or with PVC coating Packing: moist-proof paper/shrink bag/pallet or loose packing website: www.perforated-metal.biz

Introduction for Nonpressure gasoline welding and cutting machine: I. Low cost: Gasoline is an economic fuel, after validating, 3 L gasoline ‘s (about 12 RMB) workload is equal to 1 bottle of acetylene (about 80RMB). It can saving energy more than 80%. And it can save energy more than 50% to compare with dimethylmethane, LPG and Shope gas. II. Easy operation: There are no power, no pressure in gasoline tank and without boring set-up service before using. The torch structure is reasonable. It predigests the site clear work after using. III. Safe and reliable: There is all with liquid from the gasoline tank to the cutting tip, and liquid is not backfire, so the machine has no phenomena of backfire. The gasoline tank is filled with high technology flameproof material that was recommended by the Ministry of public security and Ministry of labor. The gasoline will burn slowly even directly ignite to gasoline in the tank, no exquisite burning and blast. (If the oil tank equipped this kind of flameproof material, you can weld to it even with oil.) In addition, when the cutting torch is working, even the oil tube is cut off immediately,the cutting torch will work for several minute till the gasoline used up. There is no risk of splash. It is the advance than other gasoline torch. IV. Good cutting quality: There are no undercut, burning sink in upside; and there are no nodulation, hung bits in downside. The cutting surface is clear without acierate and cirrhosis. It can reduce material wasting and processing difficulty hugely. V. Adaptability extensively: It can be used not only for cutting, welding and heating all thickness of carbon steel, but also for heat melt and flame processing of golden and silver headgear, glass, quartz, electric products, dimension stone. It can be used in metallurgy, shipbuilding, boiler, automobile, machine work, chemical plant, architecture, and farm machinery and repairing. The market mechanism is very amplitude. There are handgrip type, semi automatic, duplicating and bake torch model for cutting and heating. The Max. cutting thichness is 300mm, the welding torch can weld 1-5mm steel sheet, it can also be used for silver soldering, braze, lead welding and non-ferrous metal welding. VI. Fast working: The flame temperature of gasoline cutting torch is 3000-3300℃. The warm-up time for cutting is short. Cutting speed is fast. After practice, the cutting speed can reach 500mm/min when cutting 20mm steel sheet under 20℃. The gasoline bake torch has driving firepower, it can save time 30-50% to compare with acetylene when heating workpieces that can save more than 90% energy. VII. convenient transportation: The gasoline welding & cutting machine is makeup by blast proof gasoline tank, oil-resistant rubber hose and welding and cutting torch, the total weight is only 6 kg. So it is very convenient for conveyance and taking. At the same time, gasoline can be purchased everywhere easily. VIII. Green environmental protection: Along with the extensive use of this product, people can save plenty of electrical power and mineral resources, reduce pollution from acetylene. And there is no resid and black smoke, no harm to the circumstance. It is contribution in the contemporary era to gain in the future.

Manufacturer of all kinds of aluminum sheets, foils, coils; alloy product (aluminum alloy sheet, belt, foil) series 1-8 Products Alloy Temper Thickness (mm) Aluminium foil 8011, 3102 H22,H26, H24 and O 0.08mm- 0.11mm Manufacturer of all kinds of aluminum sheets, foils, coils; alloy product (aluminum alloy sheet, belt, foil) series 1-8 Annual production of 30 thousands tons We ensure the high quality of our products with hi-tech technologies and equipments, integrated manufacturing control, and strict inspection measures Light, corrosion-resistant, products with attractive designs Widely applied in packing, electrical and electronic engineering, construction, printing, transportation, petroleum reservation, aerospace, ships manufacturing and light industry.

The Concrete Pump Boom Elbow is made of special quality steel which is quenched and carried out carburizing chemical treatment on the inner wall. The hardness of the flanged bushings can reach 58-60 degrees and the serving life of pipeline can increase 3-5 times,which enables users to save time and cost, enhancing the production efficiency. Material : High Manganese casted such as ST52,37Mn5,45Mn2 Wall Thickness: 2mm to 10mm or more Working Capacity: 25000-35000cbm Application: Used for the concrete transportation in construction work

The Concrete Pump Boom Elbow is made of special quality steel which is quenched and carried out carburizing chemical treatment on the inner wall. The hardness of the flanged bushings can reach 58-60 degrees and the serving life of pipeline can increase 3-5 times,which enables users to save time and cost, enhancing the production efficiency. Material : High Manganese casted such as ST52,37Mn5,45Mn2 Wall Thickness: 2mm to 10mm or more Working Capacity: 25000-35000cbm Application: Used for the concrete transportation in construction work

1.Ceramic Tile Lined Steel Pipes and Elbows have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. Ceramics with very low friction factor at low impingement angles decreases the abrasion of materials maximally. Its low density makes it easy to carry and install. Furthermore, its diamond-like hardness, fine grain structure and superior mechanical strength are the unique features that make it a wide range of demanding applications, such as coal preparation, power generation, iron and steelmaking, cement, asphalt, dredging, mining and mineral processing, oil and gas drilling. 2.The Ceramic Tiles could protect Industrial Components against abrasion, impact wear and high temperature of above 1000°C. Standard Flat Tiles of Square & Rectangular Shape having thickness of 6 to 50 mm, with or without central hole are available. 3.Materials: seamless mild steel pipe plus 95% alumina ceramics for liner Designed pressure: >= 0.35Mpa Normal operation velocity: 20-35m/s Normal operation temperature: -50-350 Running medium: mixture of air and powder Size of the pipe: the inner diameter is between 1 to 120 or even lager Application fields : 1.Paper Making: For conveying pulp. 2.Metal Mines: For conveying tailings, concentrates and backfill minerals. 3.Coal Preparation Plants: For conveying dense media, mixture and coal slurry. 4.Shipping: For clearing shipping channels and sediment transportation. 5.Power Plants: For deashing, deslagging, coal dropping, powder transportation and reclaimed powder systems.

1.Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings. The pipe and fittings are lined with highly abrasion resistant ceramic by Self-propagating High-temperature Synthetic process. They are widely used to convey highly abrasive material such as fly ash and any other fine powder material in mine, thermo power generating, coal processing plant, matellurgy,construction,etc. The service life is 10 to 20 times longer than normal steel pipe. 2. Features and Advantages: 1). High Abrasion Resistant: Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel pipes. A composite elbow was used in a mining plant for about fifty thousands hours. The general service life of common steel elbow is about 700 hours. 2). Corrosion Resistant: Corundum is a neutral material, and is acid-proof and fouling -free. 3). Heat Resistant: Ceramic-lined composite steel pipe can work under circumstances of -50 to 800 degrees Celsius. 4). Lower Weight and Convenient Installation: The ceramic-lined steel composite pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes and can be welded or connected through flanges, which reduces the expense of transportation and makes the pipes easier to install. For the pipes with the same sizes, types and length, the weight of ceramic pipe is about 1/2 of the wearable cast alloy steel pipe's, while the cost has reduced 10%~20% per meter. The weight of ceramic lined steel pipe is about 1/3 of the cast stone bent pipe's, 1/2 of the cast stone straight pipe's. 5). Lower Cost : Ceramic-lined composite steel pipe can take place of expensive stainless steel, titanium, nickel, cast stone or alloy pipes. Extended service life can also reduce maintenance cost.

1.Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings. The pipe and fittings are lined with highly abrasion resistant ceramic by Self-propagating High-temperature Synthetic process. They are widely used to convey highly abrasive material such as fly ash and any other fine powder material in mine, thermo power generating, coal processing plant, matellurgy,construction,etc. The service life is 10 to 20 times longer than normal steel pipe. 2. Features and Advantages: 1). High Abrasion Resistant: Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel pipes. A composite elbow was used in a mining plant for about fifty thousands hours. The general service life of common steel elbow is about 700 hours. 2). Corrosion Resistant: Corundum is a neutral material, and is acid-proof and fouling -free. 3). Heat Resistant: Ceramic-lined composite steel pipe can work under circumstances of -50 to 800 degrees Celsius. 4). Lower Weight and Convenient Installation: The ceramic-lined steel composite pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes and can be welded or connected through flanges, which reduces the expense of transportation and makes the pipes easier to install. For the pipes with the same sizes, types and length, the weight of ceramic pipe is about 1/2 of the wearable cast alloy steel pipe's, while the cost has reduced 10%~20% per meter. The weight of ceramic lined steel pipe is about 1/3 of the cast stone bent pipe's, 1/2 of the cast stone straight pipe's. 5). Lower Cost : Ceramic-lined composite steel pipe can take place of expensive stainless steel, titanium, nickel, cast stone or alloy pipes. Extended service life can also reduce maintenance cost.